Cudy Quick Installation Guide

Introduction

This guide provides step-by-step instructions for quickly installing and setting up your Cudy Wi-Fi router.

Note: If your internet connection uses a direct Ethernet cable from the wall (instead of a DSL/Cable/Satellite modem), connect the Ethernet cable to the router's WAN port and skip steps 1, 2, and 3.

Before You Begin

Step 1: Turn off the modem and remove the battery if it has one.

Step 2: Connect router's INTERNET Port to DSL/Cable Modem/Ethernet.

Step 3: Turn on the modem and wait about 2 minutes for it to restart.

Step 4: Connect the power adapter to the router. Wait 1 minute until the system LED changes from flashing to solid on (red or blue), indicating system startup is complete.

Router Diagram

The router features the following ports and indicators:

• Power Socket: For connecting the power adapter.
• Modem Port: Typically labeled 'INTERNET' or 'WAN', for connecting to your modem or internet source.
• LAN Ports (LAN1-LAN4): For connecting wired devices like computers.
• INTERNET LED: Indicates the internet connection status.
• System LED: Indicates the router's system status.
• WPS Button: For Wi-Fi Protected Setup.
• RESET Button: For resetting the router to factory defaults.

Connect Your Computer

Wired Connection

Turn off the Wi-Fi on your computer and connect it to one of the router's LAN ports using an Ethernet cable.

Wireless Connection

Connect your device to the router's Wi-Fi. The network name (SSID) and password are printed on the bottom of the router. Example:

5GHz Wi-Fi: Cudy-XXXX-5G
2.4GHz Wi-Fi: Cudy-XXXX
Password: XXXXXXXX

Access Router Settings

Launch a web browser and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin as the password to log in.

Quick Setup Wizard

A setup wizard will appear. Follow the step-by-step instructions to configure your internet connections. The wizard typically includes steps for:

• Mode: Select operation mode (e.g., Wireless Router, Access Point).
• Timezone: Set your local timezone.
• WAN: Configure your internet connection type.
• Wireless: Set up your Wi-Fi network name (SSID) and password.
• Summary: Review your settings before applying.

Note: If the setup wizard does not appear automatically, click "Quick Setup" on the status page.

✔️ Enjoy the internet!

LED and Button Indicators

Support

For technical support, the user guide, and more information, please visit:

https://www.cudy.com/support

Email: support@cudy.com

Declarations and Notices

EU Declaration of Conformity

Cudy declares that this device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, and 2011/65/EU. The original EU declaration of conformity can be found at http://www.cudy.com/ce.

WEEE (Waste Electrical and Electronic Equipment)

This product must not be disposed of as normal household waste. It should be returned to the place of purchase or taken to a public collection point for recyclable waste to prevent negative consequences for the environment and human health. For more information, contact your local authority or the nearest collection point. Improper disposal may result in penalties according to national regulations.

FCC Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

GNU General Public License (GPL) Notice

The software code in this product is licensed under the GNU General Public License ("GPL"). Cudy makes the corresponding GPL source code available upon request via the official website or through third parties. For GPL-related questions, email support@cudy.com. Cudy also provides a GPL-Code-Centre at https://www.cudy.com/gplcodecenterdownload. The GPL code is supplied WITHOUT ANY WARRANTY.