VEVOR BJ1623-10 Wet & Dry Vacuum Cleaner Instruction Manual

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VEVOR Wet & Dry Vacuum Cleaner.

Please read this manual carefully before using the appliance and keep it for future reference.

For product questions or technical support, please contact: CustomerService@vevor.com

This document contains the original instructions. VEVOR reserves the right to interpret the user manual. The appearance of the product is subject to the unit received.

Parts Description

The VEVOR Wet & Dry Vacuum Cleaner consists of the following main parts:

• Handle
• Accessories Storage
• Latch
• Bucket
• Power Switch
• Hose Inlet
• Wheel

Included Accessories:

• Hose
• 2-in-1 Utility Nozzle
• Deluxe Car Nozzle
• 2 in 1 Crevice Nozzle
• Cloth Filter (Dry)
• Foam Filter (Wet)

Diagram Description: The main unit of the vacuum cleaner is depicted with its various components labeled. The accessories are shown separately, illustrating their different shapes and functions.

Important Safety Instructions

⚠️ WARNING!

• Do not leave the appliance unattended when plugged in. Unplug from the outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow children to use this appliance as a toy. Close supervision is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer-recommended attachments.
• Do not use a damaged cord or plug. If the appliance is not working correctly, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by the cord, use the cord as a handle, or pull the cord around sharp edges or corners. Do not run the vacuum over the cord. Keep the cord away from heated surfaces.
• Do not unplug by dragging the cord. To unplug, pull the plug, not the cord.
• Do not use the plug or the vacuum with wet hands.
• Do not insert any object into the suction inlet. Do not use any inlet with blockages; keep free from dust, lint, hair, and anything that may reduce airflow.
• Keep hair, clothes, fingers, and all parts of your body away from the vacuum when it is in use.
• Turn off the vacuum before unplugging.
• Exercise extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use the vacuum without the dust bag and/or the filter.
• This appliance is provided with double insulation. Use identical replacement parts. Refer to instructions for Servicing of Double-Insulated Appliances.
• This appliance is equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only. If the plug does not fit the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

SAVE THESE INSTRUCTIONS

SERVICING OF DOUBLE-INSULATED APPLIANCES

A double-insulated appliance is marked with one or more of the following: The words "DOBLE INSULATION" or "DOUBLE INSULATED" or the double insulation symbol (square within a square) [□].

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace.

Functional Operation Instructions

1. Take out the product and accessories from the box and check that they are in good condition.
2. Loosen the latches, pick up the main part, remove the attachment from the dust collector, and check if the filter is installed correctly.
3. Attach the casters to the axle of the base using the provided screws and gaskets.
4. Connect the hose to the inlet port. Then, connect any nozzle or brush to the other end of the hose.
5. Plug in the power cord, press the power switch, and the vacuum will start working.
6. When using the water absorption function, ensure the cloth filter is replaced with the foam filter for safety.

Product Installation and Function Diagram Description:

Diagram 1: Shows the main unit of the vacuum cleaner detached from the bucket. Arrows indicate the process of connecting the main unit to the bucket.

Diagram 2: Illustrates the hose connection for Dust Collection. Arrow 1 shows the hose end, and Arrow 2 shows the inlet port on the vacuum, indicating where to connect the hose.

Diagram 3: Illustrates the hose connection for Blowing Function. Arrow 1 shows the hose end, and Arrow 2 shows the exhaust port on the vacuum, indicating where to connect the hose for blowing.

Diagram 4: Shows the installation of the foam filter. An upward arrow indicates placing the foam filter inside the main unit. The subsequent image shows the main unit being placed onto the bucket.

Protective Device and Use Requirements

Protective Device

When the tank is filled with water, the float mechanism rises, causing the vacuum power supply to stop. An abnormal noise indicates the motor is running at high speed. If this occurs, cut off the power, pour out the water, restore power, and the vacuum will resume normal operation.

If the vacuum cleaner tips over or shakes, turn off the power, set it upright, and then turn the machine on again.

When the tank is filled with water, the float will rise, cutting off suction. Stop operation immediately.

Diagram Description: A diagram shows the float mechanism inside the vacuum tank. As water level rises, the float lifts and seals the suction inlet, preventing water from entering the motor.

Use Requirements

• ? Do not use the machine in combustible and explosive places to prevent the motor from burning.
• ✔️ Check that the hose inlet is not blocked to prevent temperature rise and motor damage.
• ? Do not collect combustible and explosive objects such as cigarettes, gasoline, etc.
• ? Do not collect sharp objects.
• ? Do not collect objects that can easily attach to the filter, such as lime powder, gypsum, and graphite powder, as these will block ventilation and damage the motor.
• Turn off the machine and remove the plug each time after use or when it is being repaired.
• ? Keep the machine away from strong sunlight and high-temperature places to prevent the body from deforming.

Cleaning and Maintenance

Before cleaning, turn off the power switch and unplug the power cord. Remove the filter and rinse it with water. Tap water is recommended for cleaning dust from the filter. Place the filter in a well-ventilated area to dry naturally before the next use or storage.

Filter Cleaning Tips:

• Shake off excess water droplets and dry it to prevent peculiar smells or blockage.
• Do not dry the filter with a blower or hot air to prevent deformation.
• Do not use detergents, bleaching agents, diluents, or alcohol, as these can cause cracks or color changes.

Diagram Description: The diagram shows a filter being brushed to remove debris, then rinsed under a faucet, and finally placed in sunlight to dry.

Fault Analysis

If faults cannot be fixed according to the above solutions, please send the machine to our maintenance center. Do not disassemble the vacuum without professional guidance.

Manufacturer Information

Manufacturer: Yongkang Sippon Electric Co., Ltd.

Address: No. 75, Sifang Road, Xicheng Zone, Yongkang city, Zhejiang

Made in China