NADAMOO Imager Wireless Barcode Scanner User Manual

Packing List

• Barcode scanner
• USB cable / charging cable
• User Manual adapter
• QC certification
• Warranty card
• Power plug (optional)

Recognize Wireless Barcode Scanner - Housing Design Description

Indicator light: Provides visual feedback on scanner status.

Shock resistance cover: Protects the scanner from impacts.

Trigger button: Initiates scanning.

USB adapter: Connects the scanner to a computer.

Physical Parameters

• Material: ABS+PC+PVC
• Power Supply: DC 5V ±5%
• Power: 245mA (operating), 317mA (MAX)
• Battery: 3.7V 1500mAH
• Charging time: 3.5 hours
• Weight: 170g ± 5g

Environment Parameters

• IP grade: IP 54
• Operating Temperature: 0 to 50 °C / 32 to 122 °F
• Storage Temperature: 0 to 50 °C / 32 to 122 °F
• Operating Humidity: 5-95% (Non-condensing)
• Storage Humidity: 5-95% (Non-condensing)
• ESD Protection: 15KV air discharge
• Shock Resistance: Designed to fall from 1.5 meters height onto a concrete surface

Technical Parameters - Performance Parameters

• Interface: USB wired/wireless
• Transmission distance: 2.4G 30m / 433MHZ 100-200m
• Light source: Red LED (Aiming) + White LED (Lighting)
• Storage: 2M (can be customed)
• Decoding capability: Codabar, Code 11, Code39/Code93, UPC/EAN, Code128/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI CODE, Standard 2 of 5. QR CODE.
• Resolution: Code39 5mil, QR 8.7mil, PCS45%
• Depth of field: 5mil CODE39: 5--12 CM; 15mil CODE39: 4--25 CM; 10mil CODE93: 4--21 CM; 15mil UPC/EAN: 4--25 CM; 20mil QR: 4--25 CM
• Decoding speed: 200 scans/s
• Error rate: 1/500million
• Trigger mode: Manual trigger, automatic
• Scanning area: 5*5 cm² - 30*30 cm²
• Indicator mode: Beeper, indicator light (LED)
• Printing Contrast: Not less than 35%
• Scan angles: Roll 0-360°, pitch ±65°, yaw ±60°

How to Use

Power on

Press the button. The scanner will beep twice and the indicator light will turn on. Power on is successful.

Power off

The system default shutdown time is 20 seconds. After 20 seconds of no operation, the scanner will issue a long beep and automatically shut down. The indicator light will turn off.

Pairing

After plugging in the adapter, scan the one-key pairing barcode within 10 seconds. If not, you need to replug the adapter.

remark: After plugging the adapter, scan the one key pairing barcode in 10 seconds, if not, need to replug the adapter.

Charging

Connect the charging cable to the bottom of the scanner and then connect the charger to the power socket. Charging time will be 2-3 hours. After fully charged, the scanner can work 4-8 hours continuously.

Reading Angle

1. Maintain a bevel between the scanner and the barcode to ensure the best reading.
2. The scanner must aim at the barcode, and the beam must cover the whole barcode. If not, errors may occur.

Correct way of reading: [image description: Scanner positioned at an angle to the barcode, with the light beam covering the entire barcode.]

Incorrect way of reading: [image description: Scanner positioned incorrectly, with the light beam not fully covering the barcode.]

LED Indicator & Beeper

Scanning Mode Setup

Setup Instruction:

1. Normal mode: Real-time transmission. Scan the 'Normal Mode' barcode; the scanner will be in real-time transmission.
2. Inventory mode: The scanner will save the barcodes it reads. When you need to upload the data to the computer, scan the 'Data Upload' barcode.
3. Scan the 'Total Number of Data' barcode; the computer will show how many barcodes the scanner has read in inventory mode.
4. Scan the 'Clear Data' barcode to clear all barcodes read in inventory mode.

Available modes: Normal Mode, Inventory Mode, Non-volatile Mode, Upload Data, Total Number of Data, Clear Data (scan with caution).

Reset the Factory Default Settings

To reset factory default settings, scan the following barcodes in turn:

• Initialization setting
• Serial mode
• 57600bps

Wired and Wireless Mode Switchover

If you need to switch to wired mode, please scan the 'USB PC keyboard' barcode.

If you need to switch back to wireless mode, please scan 'Serial mode' and '57600bps' in turn.

Available modes: USB PC keyboard, Serial mode, 57600bps

Sleep Time Setting

Setup Instruction:

1. Scan the 'Sleep Time' barcode.
2. Scan the time you want to set.

Sleep Time options: 20 seconds, 30 seconds, 60 seconds, 2 minutes, 5 minutes, 10 minutes, 20 minutes, no sleep.

Successful Reading Beep Sound

The scanner can disable the successful reading prompt sound by scanning the 'Beep Sound / Off' code. It restores the sound by scanning the 'Beep Sound / On' code.

Options: Beep Sound / On, Beep Sound / Off

Shutdown/Default value/Version information

• Shutdown
• Default value
• Software Version
• Hardware Version

Aiming Setting

The light beam emitted by the scanner helps the user find the best reading distance. Users can choose any of the modes below according to the operating environment:

• Normal mode: Light beam appears when the button is pressed.
• Always on: Light beam always appears when the scanner is electrified.
• No aiming: Light beam will not appear in any situation.

Aiming modes: *Normal mode, Always on, No aiming

LED Light Setting

The LED light provides auxiliary lighting for reading. When the light beam hits the target object, it can improve decoding performance and adaptability in low ambient light conditions. Users can set the scanner to any of the modes below according to the operating environment:

• Normal mode: LED light is on when the button is pressed and off at other times.
• Always on: LED light is always on when the scanner is electrified.
• No LED light: LED light will not be on in any situation.

LED modes: *Normal mode, Always on, No LED light

Suffix Setting

Configure suffix settings for various barcode types.

• *No Suffix
• TAB Suffix
• CR Suffix
• CRLF Suffix

Scanning Mode Setting

• *Manual trigger
• Continue scanning
• Auto Sensing

Reading Interval Time Setting

This function sets the time interval after the scanner successfully reads and outputs data, or times out for one reading. The scanner will enter decoding mode again after this period.

• No interval
• 500ms
• *1000ms
• 1500ms
• 2000ms

Image Stable Time Setting

This function sets the image stabilization time before reading, for use in auto-sensing mode when operating environment conditions change.

• 100ms
• *400ms
• 1000ms
• 2000ms

Wired transfer language setting

Select the language for wired data transfer.

• *America English
• Czech Republic
• France (French)
• *Germany (German)
• Hungary (Hungarian)
• Italy (Italian 142)
• *Japan Japanese
• Spain (Spanish)

Version Information

To allow the PC to read the unit version information, scan the following barcode.

[Barcode image: Version Information]

Available Bar Code Type / Forbidden Configuration

All Decoding Bar Code

The scanner allows or forbids reading all supported barcodes by scanning the following setting barcodes. It will only allow reading the setting codes after scanning the forbidden code.

• Allow reading all the bar code types
• Forbid reading all the bar code types
• *Default Type / On

Bar Code Rotating Function

Scan the following barcodes to set the scanner to allow or forbid reading 360° rotating barcodes. Forbidding the 360° rotate function can improve scanning speed.

• *Allow 360° rotate reading
• Forbid 360° rotate reading

UPCE1

Scan the following barcodes to set the scanner to allow or forbid reading UPCE1 codes.

• *Allow
• Forbidden

Code128

Scan the following barcodes to set the scanner to allow or forbid reading code 128.

• *Allow
• Forbidden

Scan the following barcodes to set the shortest reading length for code 128:

• Code 128 Info shortest length '0'
• Code 128 Info shortest length '4'

Scan the following barcodes to set the longest reading length for code 128:

• *Code 128 Info longest length '32'
• Code 128 Info longest length '255'

EAN13

Scan the following barcodes to set the scanner to allow or forbid reading EAN13 codes.

• *Allow
• Forbidden

EAN8

Scan the following barcodes to set the scanner to allow or forbid reading EAN8 codes.

• *Allow
• Forbidden

UPCA

Scan the following barcodes to set the scanner to allow or forbid reading UPCA codes.

• *Allow
• Forbidden

UPCEO

Scan the following barcodes to set the scanner to allow or forbid reading UPCEO codes.

• *Allow
• Forbidden

Code39

Scan the following barcodes to set the scanner to allow or forbid reading code 39.

• *Allow
• Forbidden

Scan the following barcodes to set the shortest reading length for code 39:

• Code 39 Info shortest length '0'
• *Code 39 Info shortest length '4'

Scan the following barcodes to set the longest reading length for code 39:

• *Code 39 Info longest length '32'
• Code 39 Info longest length '255'

Code93

Scan the following barcodes to set the scanner to allow or forbid reading code 93.

• *Allow
• Forbidden

Scan the following barcodes to set the shortest reading length for code 93:

• Code 93 Info shortest length '0'
• *Code 93 Info shortest length '4'

Scan the following barcodes to set the longest reading length for code 93:

• *Code 93 Info longest length '32'
• Code 93 Info longest length '255'

CodeBar

Scan the following barcodes to set the scanner to allow or forbid sending the prefix character for CodeBar.

• Allow
• *Forbidden

Scan the following barcodes to set the shortest reading length for the codebar:

• CodeBar Info shortest length '0'
• *CodeBar Info shortest length '4'

Scan the following barcodes to set the longest reading length for the codebar:

• *CodeBar Info longest length '32'
• CodeBar Info longest length '255'

QR

Scan the following barcodes to set the scanner to allow or forbid reading the QR Code.

• *Allow
• Forbidden

Interleaved 2 of 5

Scan the following barcodes to set the scanner to allow or forbid reading the Interleaved 2 of 5 code.

• Allow
• *Forbidden

Scan the following barcodes to set the shortest reading length for the Interleaved 2 of 5:

• Interleaved 2 of 5 Info shortest length '0'
• * Interleaved 2 of 5 Info shortest length '4'

Scan the following barcodes to set the longest reading length for the Interleaved 2 of 5:

• *Interleaved 2 of 5 Info longest length '32'
• Interleaved 2 of 5 Info longest length '255'

Industrial 25

Scan the following barcodes to set the scanner to allow or forbid reading the Industry 25.

• Allow
• *Forbidden

Scan the following barcodes to set the shortest reading length for the Industry 25:

• Industry 25 Info shortest length '0'
• * Industry 25 Info shortest length '4'

Scan the following barcodes to set the longest reading length for the Industry 25:

• *Industry 25 Info longest length '32'
• Industry 25 Info longest length '255'

Matrix 2 of 5

Scan the following barcodes to set the scanner to allow or forbid reading the Matrix 2 of 5.

• Allow
• *Forbidden

Scan the following barcodes to set the shortest reading length for the Matrix 2 of 5:

• Matrix 2 of 5 Info shortest length '0'
• * Matrix 2 of 5 Info shortest length '4'

Scan the following barcodes to set the longest reading length for the Matrix 2 of 5:

• *Matrix 2 of 5 Info longest length '32'
• Matrix 2 of 5 Info longest length '255'

Code11

Scan the following barcodes to set the scanner to allow or forbid reading the Code 11.

• Allow
• *Forbidden

Scan the following barcodes to set the shortest reading length for the Code 11:

• Code 11 Info shortest length '0'
• *Code 11 Info shortest length '4'

Scan the following barcodes to set the longest reading length for the Code 11:

• *Code 11 Info longest length '32'
• Code 11 Info longest length '255'

MSI

Scan the following barcodes to set the scanner to allow or forbid reading the MSI.

• Allow
• *Forbidden

Scan the following barcodes to set the shortest reading length for the MSI:

• MSI Info shortest length '0'
• *MSI Info shortest length '4'

Scan the following barcodes to set the longest reading length for the MSI:

• *MSI Info longest length '32'
• MSI Info longest length '255'

DM (optional)

Scan the following barcodes to set the scanner to allow or forbid reading the DM.

• Allow
• Forbidden

PDF417 (optional)

Scan the following barcodes to set the scanner to allow or forbid reading the PDF417.

• *Allow
• Forbidden

RSS (optional)

Scan the following barcodes to set the scanner to allow or forbid reading the RSS-14.

• Allow
• *Forbidden

Scan the following barcodes to set the scanner to allow or forbid reading the limitative RSS.

• Allow
• *Forbidden

Scan the following barcodes to set the scanner to allow or forbid reading the expanding RSS.

• Allow
• *Forbidden

Scan the following barcodes to set the shortest reading length for the RSS:

• RSS Info shortest length '0'
• *RSS Info shortest length '4'

Scan the following barcodes to set the longest reading length for the RSS:

• *RSS Info longest length '32'
• RSS Info longest length '255'

Warranty Card

1. Customers can enjoy their legal rights using the purchase invoice and the warranty card without needing to complete any warranty procedures.
2. All warranty items are subject to the guarantee clause and user notice published by our company.
3. NADAMOO will not guarantee the product if it is in one of the following situations, but can offer maintenance service with charges:
   • Man-made damage or improper operation.
   • Damage caused by maintenance performed by non-professionals.
   • Absence of a warranty card, or the model is inconsistent with the actual product, or the warranty card is obliterated.
   • Irresistible damage (e.g., natural disasters like thunder, earthquakes, fire, etc.).
4. Please fill in the warranty card carefully and do not obliterate it. Otherwise, maintenance charges will apply.
5. Please keep this card safe. NADAMOO will not provide another warranty card.

Barcode Scanner Warranty Proof

Maintenance Record