Bluetooth Barcode Scanner Quick Start Guide

Package Include:

• 1x Handheld barcode scanner
• 1x USB receiver
• 1x USB Cable

Decoder parameters:

• Working current: 3.5 V ± 10%x100mA
• Light source: 632nm Visible red light
• Sensor: Linear CCD Sensor, Resolution: 2500
• CPU: ARM 32-bit Cortex
• Decoding speed: 300/sec
• Decoding accuracy: ≥3.3mil@PCS90% CODE39
• Trigger Mode: Button, Continuous scanning, Auto-Induction
• Printing Contract: ≥30%
• Depth of Field: 30-500mm
• Scanning angle: rotation 30°, inclination 60°, declination 60°
• Decode Capability: EAN-8, EAN-13, Codabar, CODE11, CODE39, CODE93, CODE128, China Post, GS1-128, GS1-Limited, GS1-Omnidirectional, UPC-A, UPC-E, Interleaved 2 of 5, Matrix 2of5, Industrial 2 of 5, ISBN/ISSN, ISBT, MSI, Plessey, ITF14, etc.
• Reads linear barcode on paper and screen.
• Button life: 1,000,000 times
• LED life: 100,000 hours
• Upload mode: Instant upload mode, Storage mode
• Storage: 512KB=5000 EAN13 barcodes
• Working time: Full load≈18hours, Normal use ≈3 to 10days
• Compatible system: Windows series, Mac, Android, IOS
• Connection: Bluetooth connection, Wired connection
• Wireless type: Bluetooth
• Distance: ≤10m/33ft

Shape description

Dimensions: 120X48x23mm

Charge LED:

• During charging, the green light is on.
• When the green light is off, the charging is completed.

Decoder LED:

• Press button to start the scanner, the green light is on.
• When the reading is successful, the green light flashes once.

Bluetooth LED:

• When the scanner is set into pairing mode, the blue light will be flashing.
• When bluetooth connection is successful, the blue light will stop flashing.

Connection Mode Setting

I. Wired Mode:

1. Connect the scanner to your computer via USB cable.
2. Press the scanner's blue button to start the scanner.
3. Scan the following code to convert the scanner to wired mode: [Wired Mode Barcode]
4. Run Microsoft Word or Notepad on computer, put the cursor in the field. When a barcode is scanned, the scanner inputs the barcode into the location of the cursor.

II. Bluetooth Mode:

• [Bluetooth Mode Barcode]
• [Match Barcode]

Note:

1. Be sure the scanner is set to Bluetooth Mode.
2. The Scanner name is: "General Bluetooth HID Barcode".
3. When you need to switch devices, you have to delete the pairing and re-establish connection between the scanner and the device.

Pairing with Android / IOS device:

1. Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
2. Read "Bluetooth mode" barcode to convert scanner to bluetooth mode.
3. Read "Match" barcode; blue light flashing means in matching mode.
4. Turn on the Bluetooth in Android / IOS device, search for "General Bluetooth HID Barcode".
5. Click "General Bluetooth HID Barcode" in available device. When the connection is successful, the blue light is normally on and the buzzer drops twice.

Pairing with Windows 8/10:

1. Insert the Bluetooth USB receiver; the computer will automatically install the drive.
2. Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
3. Read "Bluetooth mode" barcode to convert scanner to bluetooth mode.
4. Read "Match" barcode; blue light flashing means in matching mode.
5. Open the Control Panel, click on the "Add a device"; the computer will search "General Bluetooth HID Barcode".
6. Click the device and click "Next"; the computer will automatically install the driver. When the connection is successful, the blue light is normally on and the buzzer drops twice.

Pairing with Windows 7:

1. Insert the Bluetooth USB receiver; the computer will automatically install the drive.
2. Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
3. Read "Bluetooth mode" barcode to convert scanner to bluetooth mode.
4. Read "Match" barcode; blue light flashing means in matching mode.
5. Open the Control Panel, click on the "Add a device"; the computer will search "General Bluetooth HID Barcode".
6. Double-click the device; the computer will automatically install the driver. When the connection is successful, the blue light is normally on and the buzzer drops twice.

Pairing with Windows XP:

1. Insert the Bluetooth receiver; the computer will automatically install the drive.
2. Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
3. Open the Control Panel, click "Bluetooth device" → click the Add button, Then, Select "My device is set up and ready, you can find", click Next.
4. Read "Bluetooth mode" barcode to convert scanner to bluetooth mode.
5. Read "Match" barcode; blue light flashing means in matching mode.
6. The computer will search "General Bluetooth HID Barcode".
7. Double-click the device. The dialog box appears, choose not to use keys, click "Next"; the computer will install the driver. When the connection is successful, the blue light is normally on and the buzzer drops twice.

Upload Mode Setting

Under Bluetooth mode, there are two upload modes:

A. Instant upload mode:

Scanning barcode and real-time upload the barcode.

**To set the scanner to instant upload mode, please scan the following barcode:

[Instant upload mode Barcode]

B. Storage mode:

Under storage mode, all scanned data will be stored directly into the buffer memory of the scanner. Internal storage supports up to 5000 barcodes. You could upload the data to computer when you need it.

An operation in storage mode is strongly recommended under the following scenarios:

• 1) During the scanning process, the device often leaves the Bluetooth signal range.
• 2) Due to a high quantity of blocking objects, the Bluetooth signal's stability can't be ensured.

**To set the scanner to storage mode, please scan the following barcode:

[Storage mode Barcode]

** Scan the following barcode to upload the stored data:

[Upload data Barcode]

**Scan the following barcode to show total number of stored barcode:

[Show total storage Barcode]

**Scan the following barcode to clear all the stored barcode:

[Clear data Barcode]

Scanning Mode setting

• Key trigger mode: Red light is on when pressing the button.
• Continuous scanning mode: Red light always on when the scanner is electrified. The scanner reads barcode without pressing any buttons.
• Auto-induction mode: Red light is on when a barcode appears in front of the scanning window and then goes out after the barcode is read.

** Scan the following barcode to set the scanner to key trigger mode:

[Keys Trigger mode (default) Barcode]

** Scan the following barcode to set the scanner to continuous mode:

[Continuous Mode Barcode]

** Scan the following codes orderly to set the scanner to Auto-induction mode:

[Enter into Auto -induction setting Barcode]

[Auto-induction mode --ON Barcode]

**Scan the following code to turn off Auto-induction mode:

[Auto-induction mode--OFF Barcode]

Profile Setting

1. HID profile (frequently-used)

In the HID protocol, there are 2 entities: the "host" and the "device". The host communicates with the device and receives input data from the device on actions performed by the human. The most common example of a "host" is a PC, but some cell phones can also be hosts. The "device" is the entity that directly interacts with a human, such as a keyboard or mouse.

If you want to set the scanner as a device to enter the barcode, please read code “HID-mode: USB Keyboard”:

[HID-mode: USB keyboard Barcode]

Scan one of the code to select transmission speed:

• [HID-Low Barcode]
• [HID-fast Barcode]

2. Spp Profile (Rarely used)

SPP defines how to set up virtual serial ports and connect two Bluetooth enabled devices.

Usage Scenarios: A scenario would be using two devices, such as PCs or laptops, as virtual serial ports and then connecting the two devices via Bluetooth technology.

[SPP-mode: Virtual-COM Barcode]

Terminator setting

• To add Tab after barcode, Please scan the code “Tab”: [Tab Barcode]
• To add CR (ENTER) after barcode, Please scan the code “CR”: [CR Barcode]
• To set no-termination, please scan the code "None": [None Barcode]

Character Setting

1. Insert Custom prefix

1. First step, scan the following code “Enter custom prefix setting”: [Enter custom prefix setting Barcode]
2. Second step: scan the needed character code (char-table is on page 19-25). E.g. To add prefix "VC", scan the corresponding character code 1086, 1067 in order: [1086 V Barcode], [1067 C Barcode]
3. Third step: scan the following code “Exit custom prefix setting”: [Exit custom prefix setting Barcode]

After that, when you scan a barcode X001E52257, "VCX001E52257" will show: [X001E52257 Barcode]

2. Clear all prefix

Scan the "Clear All Prefix" barcode to clear all prefix characters: [Clear All Prefix Barcode]

3. Insert Custom Suffix

1. First step, scan the following code “Enter custom suffix setting”: [Enter custom suffix setting Barcode]
2. Second step: scan the needed character code (char-table is on page 19-25). E.g. To add prefix "VC", scan the corresponding character code 1086, 1067 in order: [1086 V Barcode], [1067 C Barcode]
3. Third step: scan the following code "Exit custom suffix setting": [Exit custom suffix setting Barcode]

After that, when you scan a barcode X001E52257, "X001E52257VC" will show: [X001E52257 Barcode]

4. Clear all suffix

Scan the "Clear All suffix" barcode to clear all suffix characters: [Clear All suffix Barcode]

Note: "Clear All suffix" does not clear the terminator.

5. hide prefix character

Scan one of the following bar codes to hide the corresponding prefix characters:

• [Hide 1 prefix character Barcode]
• [Hide 2 prefix character Barcode]
• [Hide 3 prefix character Barcode]
• [Hide 5 prefix character Barcode]

E.g. For barcode 123456, if you set the scanner to hide 1 prefix character, the data received by the host is "23456".

6. Unhide prefix character

Scan the barcode below to unhide prefix characters: [Unhide prefix character Barcode]

7. hide suffix character

Scan one of the following bar codes to hide the corresponding suffix characters:

• [hide 1 suffix character Barcode]
• [hide 2 suffix character Barcode]
• [hide 3 suffix character Barcode]
• [hide 5 suffix character Barcode]

E.g. For barcode 123456, if you set the scanner to hide 1 suffix character, the data received by the host is "12345".

8. Unhide suffix character

Scan the barcode below to unhide suffix characters: [Unhide suffix character Barcode]

9. hide intermediate character

First step, scan one of the following barcode to set the scanner to hide character from the First M-bit character:

• [hide from the First character Barcode]
• [hide from the second character Barcode]
• [hide from the third character Barcode]
• [hide from the fourth character Barcode]
• [hide from the fifth character Barcode]
• [hide from the sixth character Barcode]
• [hide from the seventh character Barcode]
• [hide from the eighth character Barcode]

Second step, scan one of the following bar codes to set the scanner to hide N-bit characters:

• [Hide one character Barcode]
• [Hide two character Barcode]
• [Hide three character Barcode]
• [Hide four character Barcode]
• [Hide five character Barcode]
• [Hide six character Barcode]
• [Hide seven character Barcode]
• [Hide eight character Barcode]

E.g. For barcode 123456789, If you want to set the scanner to hide the "56" character, First, scan the programming code "hide from the fourth character", Second, scan the programming code "Hide two character". After that, the data received by the host is "1234789".

10. Unhide the intermediate character

Scan the barcode below to unhide the intermediate character: [unhide the intermediate character Barcode]

Keyboard Setting

Scan the following code to Active or Hide the Input Method (only use for ipad / iphone, if you need to setup the input method of the Android device, please contact us at nadamoo@126.com):

[Double click button to Show and hide IOSkeyboard Barcode]

Double click Power key quickly, it will active the soft keypad. Double click Power key quickly again, the soft keypad will hide.

Language settings

Scan one of the following codes to set the language:

• UNITED STATES: [United States Barcode]
• GERMANY: [Germany Barcode]
• FRANCE: [France Barcode]
• ITALY: [Italy Barcode]
• RUSSIAN: [Russian Barcode]
• Finland: [Finland Barcode]

Voice Settings

Scan one of the following codes to set the voice:

• Open Decoding Voice (default): [Open Decoding Voice Barcode]
• Close Decoding Voice: [Close Decoding Voice Barcode]
• High volume: [High volume Barcode]
• low volume: [low volume Barcode]

Sleep Time Setting

The scanner will start sleep mode if there is no operation on it over 30s. Short press on the trigger can wake it up.

Here is the steps to change the sleeping time:

1. First: scan code "into sleep time setting": [Into sleep time setting Barcode]
2. Second: Scan one of the following barcode to set the time interval, when it's idle exceeding the time interval you set, the scanner will power off.

• 30 seconds: [30 seconds Barcode]
• 2 minutes: [2 minutes Barcode]
• 20 minutes: [20 minutes Barcode]
• Not sleep: [Not sleep Barcode]

Shutdown Setting

Scan the code “Shutdown”, the scanner will emit a beeping sound and then shutdown immediately: [Shutdown Barcode]

Restore Factory Setting

If you do not need the previously configured functions, scan the code "Restore defaults" to restore the scanner: [Restore defaults Barcode]

Buzzer & FAQ

Buzzer:

• 1, Long beeps once: Bluetooth disconnected
• 2, Long beeps twice: Bluetooth module failure
• 3, Long beeps 3 times: Low battery, Please charge
• 4, Short beeps once: upload OK, Settings OK
• 5, Short beeps twice: connection succeeded
• 6, Short beeps 3 times: upload failed
• 7, Short beeps 5 times: Setting error, matching error

FAQ:

1. Can't search the scanner

1. Make sure the scanner is in HID-mode.
2. Whether the scanner is in matching state - blue light flashing.

2. Scanner connected but barcode is not upload

1. Whether the scanner set to storage mode, Please set it to Instant upload Mode.
2. Whether the scanner set to SPP-mode, Please set it to HID-mode.

Character table

This section contains a comprehensive table of character codes used for scanner configuration. Each entry includes a barcode, a numeric code, and the corresponding character or control function.

Control Characters:

• 1001 SOH (01)
• 1002 STX (02)
• 1003 ETX (03)
• 1004 EOT (04)
• 1005 ENQ (05)
• 1006 ACK (06)
• 1007 BEL (07)
• 1008 Backspace (08)
• 1009 HT (09)
• 1010 LF (0A)
• 1011 VT (0B)
• 1012 FF (0C)
• 1013 CR (0D)
• 1014 SO (0E)
• 1015 SI (0F)
• 1016 DEL (10)
• 1017 DC1 (11)
• 1018 DC2 (12)
• 1019 DC3 (13)
• 1020 DC4 (14)
• 1021 NAK (15)
• 1022 SYN (16)
• 1023 ETB (17)
• 1024 CAN (18)
• 1025 EM (19)
• 1026 SUB (1A)
• 1027 ESC (1B)
• 1028 FS (1C)
• 1029 GS (1D)
• 1030 RS (1E)
• 1031 US (1F)

Special Characters and Symbols:

• 1033 !
• 1034 "
• 1035 #
• 1036 $
• 1037 %
• 1038 &
• 1040 (
• 1041 )
• 1042 *
• 1043 +
• 1046 /
• 1058 :
• 1059 ;
• 1060 <
• 1061 =
• 1062 >
• 1063 ?
• 1064 @

Alphanumeric Characters:

• 1045 1
• 1047 2
• 1048 3
• 1049 4
• 1050 5
• 1051 6
• 1052 7
• 1053 8
• 1054 9
• 1065 A
• 1066 B
• 1067 C
• 1068 D
• 1069 E
• 1070 F
• 1071 G
• 1072 H
• 1073 I
• 1074 J
• 1075 K
• 1076 L
• 1077 M
• 1078 N
• 1079 O
• 1080 P
• 1081 Q
• 1082 R
• 1083 S
• 1084 T
• 1085 U
• 1086 V
• 1087 W
• 1088 X
• 1089 Y
• 1090 Z
• 1091 [
• 1092 \
• 1093 ]
• 1094 ^
• 1095 -
• 1096 _
• 1097 a
• 1098 b
• 1099 c
• 1100 d
• 1101 e
• 1102 f
• 1103 g
• 1104 h
• 1105 i
• 1106 j
• 107 k
• 1108 l
• 1109 m
• 1110 n
• 1111 o
• 1112 p
• 1113 q
• 1114 r
• 1115 s
• 1116 t
• 1117 u
• 1118 v
• 1119 w
• 1120 x
• 1121 y
• 1122 z
• 1123 {
• 1124 }
• 1125 [
• 1126 ~
• 1127 Delete