HDMI Matrix 2x2 With EDID Control
User manual
Introduction
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
This is a high performance HDMI Matrix with two HDMI inputs & two outputs. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on any of the two displays simultaneously. It supports 4Kx2K, 3D, and 12-bit Deep Color. With its 3 Gbps bandwidth and the additional features of the latest HDMI standards, you can be sure of great HDMI distribution.
Features
- Support display resolutions up to 4Kx2K @ 30Hz, 1080P @ 120Hz, and 1080P 3D @ 60Hz.
- 3D HDMI 1.4a video format support.
- 3D video support including Frame packing for all 3D formats up to a 297 MHz TMDS clock.
- Supports deep color up to 48-bit per pixel.
- HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
- Supports the reception of any audio data conforming to the HDMI specification 1.4 such as L-PCM at up to 192 kHz, compressed audio (IEC 61937), DSD, DST, DTS and HBR.
- Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.
- Operates for TMDS clock frequencies up to 300 MHz.
- Supports EDID control via EDID Selector.
Package
- 1 x HDMI Matrix
- 1 x 5V1A DC Power Supply adaptor
- 1 x Operation Manual
- 1 x Remote controller
Specifications
- Frequency Bandwidth: 2.97 Gbps
- Input Ports: 2 x HDMI Female input ports
- Output Ports: 2 x HDMI Female output ports
- Power Supply: DC 5V 1A
- ESD Protection: Human Body Model: ±8kV (air-gap discharge), ±4kV (contact discharge)
- Dimensions (mm): 70(W) x 145(D) x 25(H)
- Weight (g): 300
- Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
- Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
- Relative Humidity: 20 ~ 90% RH (Non-condensing)
- Power Consumption (Max): 5W
Operation Controls and Functions
Front Panel
A diagram shows the front panel with numbered controls. The controls are:
- ON/OFF: Power on/off switch.
- POWER LED: This red LED illuminates when the device is connected with power supply.
- IR IN: Remote control signal receive.
- OUTPUT A: Press this button to select input sources to HDMI OUT A. The LED will indicate the corresponding input source.
- OUTPUT B: Press this button to select input sources to HDMI OUT B. The LED will indicate the corresponding input source.
- EDID Selector: Select HDMI output signal format via EDID Selector.
The EDID Selector has 16 settings:
| Number | EDID Selector | Description |
|---|---|---|
| 1 | 0000 | 1080P, Stereo Audio 2.0 |
| 2 | 0001 | 1080P, Dolby/DTS 5.1 |
| 3 | 0010 | 1080P, HD Audio 7.1 |
| 4 | 0011 | 1080I, Stereo Audio 2.0 |
| 5 | 0100 | 1080I, Dolby/DTS 5.1 |
| 6 | 0101 | 1080I, HD Audio 7.1 |
| 7 | 0110 | 3D, Stereo Audio 2.0 |
| 8 | 0111 | 3D, Dolby/DTS 5.1 |
| 9 | 1000 | 3D, HD Audio 7.1 |
| 10 | 1001 | 4K2K, Stereo Audio 2.0 |
| 11 | 1010 | 4K2K, Dolby/DTS 5.1 |
| 12 | 1011 | 4K2K, HD Audio 7.1 |
| 13 | 1100 | Reserve |
| 14 | 1101 | Reserve |
| 15 | 1110 | Reserve |
| 16 | 1111 | Auto mode (default) |
Rear Panel
A diagram shows the rear panel with numbered connections. The connections are:
- HDMI OUTPUT: These slots are where you connect the HDTV or monitor with an HDMI cable.
- HDMI INPUT: These slots are where you connect the HDMI source output from devices like DVD players or PS3.
- DC IN: Plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.
Application Example
A diagram illustrates the setup: A TV and a Projector are connected to the HDMI Matrix's outputs. The HDMI Matrix receives input from a PS3 and a DVD player via HDMI cables. The diagram shows the flow of signals.
Remote Control
The remote control allows for switching input sources to the outputs.
- OUTPUT A: Press the 'IN1' or 'IN2' button to select the input source for HDMI OUTPUT A. The corresponding LED will indicate the selected input. Press the '⏪' button to cycle through inputs IN1/IN2 for OUTPUT A.
- OUTPUT B: Press the 'IN1' or 'IN2' button to select the input source for HDMI OUTPUT B. The corresponding LED will indicate the selected input. Press the '◀' button to cycle through inputs IN1/IN2 for OUTPUT B.
Buttons 'IN3' and 'IN4' in the OUTPUT A & B areas on the remote control have no function.
