Supported Vehicles
- Volkswagen Beetle (2012-2015)
- Volkswagen CC (2009-2015)
Key Features
The iDatalink Maestro RR allows you to retain essential vehicle features when installing an aftermarket car stereo, including:
- Steering Wheel Controls
- MFD (Multi-Function Display)
- MDI (Media Device Interface)
- VW Bluetooth
Installation Overview
Follow these steps for a successful installation:
- Prepare the Module: Ensure your iDatalink Maestro module is programmed with the correct firmware for your specific vehicle.
- Connect Harnesses: Connect the provided interface harness and any necessary adapters to your aftermarket radio and the vehicle's factory wiring.
- OBDII Connection: Connect the OBDII connector to the vehicle's OBDII port.
- Wiring: Refer to the wiring diagrams and wire reference charts for correct connections.
- Test: Test all functions after installation.
For detailed instructions, refer to the specific sections within this guide, including Installation Instructions, Wiring Diagram, Radio Wire Reference Chart, and Troubleshooting Table.
Technical Assistance
For any questions or support, contact iDatalink:
- Phone: 1-866-427-2999
- Email: maestro.support@idatalink.com
- Website: maestro.idatalink.com/support
- Forum: www.12voltdata.com/forum
Important Notes
- It is recommended to have this installation performed by a certified technician.
- Ensure your aftermarket radio has the latest firmware from the manufacturer for optimal performance.
