AMADA Floating Shelf Instruction Manual

Model/Modèle : AMFS13/AMFS13–B/AMFS13-W/AMFS13-M/AMFS13-S

English: 01-03

Français: 04-06

Thank you for choosing this AMADA product! At AMADA, we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.

support@amadahome.com

Merci d'avoir choisi ce produit AMADA! Chez AMADA, nous nous efforçons de vous fournir les meilleurs produits et services de qualité dans l'industrie. Si vous rencontrez des problèmes, n'hésitez pas à nous contacter au support@amadahome.com.

IMPORTANT SAFETY INFORMATION

• Check package contents against supplied parts and hardware list to ensure that all components were received undamaged. DO NOT use damaged or defective parts. If you require replacement parts, please contact AMADA customer service at support@amadahome.com.
• Carefully read all instructions before attempting installation. If you DO NOT understand the instructions or have any concerns or questions, please contact customer service at support@amadahome.com.
• NOT all parts and hardware included will be used.
• DO NOT use this product for any purpose that is NOT specified in this manual. DO NOT exceed weight capacity. AMADA cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

Tools Needed (NOT Included)

Stud Finder, Level, Pencil, Philips Screwdriver, Drill, 5/64"(2mm) Wood Drill Bit, 1/4"(6mm) Concrete Drill Bit, Hammer

Supplied Parts and Hardware

Boards: Board (A) x1, Board (B) x1, Board (C) x1

Screws: Long Lag Screw M4x50mm (D) x3, Short Lag Screw M4x35mm (E) x6

Wall Anchors:

• Wall Anchor (F) 13x42mm x6: CAUTION! These wall anchors [F] are for drywall ONLY. DO NOT use them in concrete / brick / wood studs wall.
• Wall Anchor (G) M6x30mm x6: CAUTION! These anchors [G] are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs.

Step 1 Secure the Lag Screws to the Wall

Before installation, please identify your wall type.

• For wood stud installation, follow step 1A.
• For drywall installation, follow step 1B.
• For solid concrete and concrete block walls installation, follow step 1C.

Step 1A For Wood Stud

WARNING: For wood stud mounting, wall anchors [F] and [G] are NOT necessary.

Needed for Wood Stud: 1 21/32"(42mm) ø5/64″(ø2mm) for Long Lag Screw.

Note: The wall anchor [F] is for drywall only!

Wall: 5/16"(8mm)

Note: Allow head of screw to protrude 5/16"(8mm) from the wall.

Step 1B For Drywall

Note: The thickness of the drywall must be beyond 25/32"(20mm).

Wall: 5/16"(8mm)

Note: Allow head of screw to protrude 5/16"(8mm) from the wall.

Step 1C For Solid Concrete and Concrete Block Walls

Drill Bit Sizes: 1 3/8"(35mm) and 1/4"(ø6mm)

Wall: 5/16"(8mm)

Note: Allow head of screw to protrude 5/16"(8mm) from the wall.

Step 2 Secure the Boards onto the Lag Screws

1. Hang the board onto the 2 screws.
2. Pull down on the board to secure in place.

Load Capacity:

• Board A: 5KG (11LBS)
• Board B: 5KG (11LBS)
• Board C: 5KG (11LBS)

Thank you again for choosing this AMADA product!

Merci d'avoir choisi ce produit AMADA!

All of us at AMADA do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at support@amadahome.com.

Nous tous chez AMADA apprécions votre achat de produit. Nous espérons que vous êtes aussi satisfait de votre produit que nous le concevons et le fabriquons pour vous. Nous nous efforçons de vous fournir les meilleurs produits et services de qualité dans l'industrie. Si vous rencontrez des problèmes, n'hésitez pas à nous contacter au support@amadahome.com.

860-00199-00 Rev00