Manuals+

Wiser Motion Sensor User Manual

Information on the features and functions of the device.

05/2025

Legal Notice

The information contained in this document includes general descriptions, technical characteristics, and data, and/or recommendations regarding products/solutions. This document does not replace a detailed analysis or an operational and site-specific development or schematic plan. It must not be used to determine the suitability or reliability of products/solutions for specific user applications. It is the responsibility of each user to perform, or have performed by qualified personnel (integrator, specifier, or similar professional), an adequate and comprehensive risk analysis, risk assessment, and test series for the products/solutions in accordance with the specific application or use.

The Schneider Electric brand and all other trademarks contained in this document belonging to Schneider Electric SE and its subsidiaries are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.

This document and its contents are protected by applicable copyright laws and are provided for informational purposes only. Without the prior written consent of Schneider Electric, no part of this document may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise) for any purpose.

Schneider Electric grants no rights or licenses for the commercial use of the document or its contents, except for a non-exclusive and personal license to consult it "as is".

Schneider Electric reserves the right to make changes or updates to the content of this document or its format at any time without prior written notice.

To the extent permitted by applicable law, Schneider Electric and its subsidiaries assume no responsibility or liability for errors or omissions in the information content of this document or for consequences arising from or as a result of the proper or improper use of the information contained herein.

Table of Contents

Safety Information

Important Information

Read these instructions carefully and familiarize yourself with the device before installing, operating, maintaining, or servicing it. The following special notices may appear in this manual or on the device to warn of potential hazards or to draw attention to information that explains or simplifies a procedure.

The addition of a safety label ("Danger" or "Warning") to one of these symbols indicates an electrical hazard that will lead to injury if the respective instructions are not followed.

This is the safety warning symbol. It alerts you to potential injury hazards. Follow all safety messages listed next to this symbol to prevent potential injury or danger to life.

DANGER: DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.

Failure to comply with these instructions will result in death or serious injury.

WARNING: WARNING indicates a hazardous situation that, if not avoided, may result in death or serious injury.

CAUTION: CAUTION indicates a hazardous situation that, if not avoided, may result in minor or moderate injury.

NOTICE: A NOTICE indicates a procedure without risk of injury.

Wiser Motion Sensor

For Your Safety

NOTICE: RISK OF DEVICE DAMAGE

Related Topics

About the Device

The Wiser motion sensor (hereinafter referred to as the Sensor) detects nearby movements and measures the ambient light level. The Sensor sends data to the Wiser Hub. The threshold for light settings and/or motion detection can be configured in the Wiser App.

Sensor Features:

Controls

Install the Device

Refer to the installation manual included with the product.

Links to Installation Manual:

Related Topics

Pair the Device with the Wiser Hub

Pair your device with the Wiser Hub using the Wiser Home App.

  1. On the home screen, tap ⚙️.
  2. Tap Devices > ➕ > Security & Protection > Motion Sensor.

SUGGESTION: You can also navigate by tapping Control > ➕ > Security & Protection > Motion Sensor.

3. Tap Scan QR Code and allow the Wiser Home App to access your camera. Then scan the QR code on the device.

NOTICE: If you cannot find the correct QR code, tap I cannot find the correct QR code to pair the device manually and proceed to step 4.

If the QR code is incorrect, a message "Incorrect QR code scanned" will appear. Tap I cannot find the QR code and select one of the following options:

4. Tap Next, press the function button 3 times briefly, and make sure the LED flashes yellow.