TOSAR1 Manual Instruction

Automatic Reclosing Device

Product Dimensions

Height: 105.3 mm (96.5 mm)

Width: 20mm

Depth: 18mm

Device Width: 82mm

Device Depth: 50mm

Device Height: 45.2mm

Product Installation

The manual illustrates the installation process, showing how to connect the 2P and 4P configurations of the device.

Wiring Diagram

The wiring diagram shows connections for PE, L1, L2, L3, and N terminals. It includes details for AC input (100-240V) and connections for CLOSE, OPEN, and COM terminals (1-6).

Note: Check power supply!

Reset Mode

The device supports two reset modes: Auto Reset and Manual Reset.

Auto Reset: The device automatically resets after a fault.

Manual Reset: The device requires manual intervention to reset. This is indicated by a lever that needs to be moved.

Note: The dry contact is disabled when in "Manu" mode.

Status Indicator

The indicator light provides status information:

Flashing Green: Device is in auto mode, closed, operating in a 15-minute cycle.
Solid Green: Device is in normal operation, not in the cycling program.
Flashing Red: Device is in auto mode and has tripped.
Solid Yellow: Device is in manual mode.

Locking Mechanism

Illustrations show how to lock the device, with a requirement for a screw with a diameter of 4mm or less.

Safety and Installation Notices

Warning:

Smart devices must be installed and maintained by qualified professionals with electrical safety training.
Do not install if the device is damaged upon opening the package.
Install in a distribution cabinet, isolated by doors or baffles.
Comply with all applicable local, regional, and national regulations.
Professional installation engineers must verify mechanical strength and electrical conductivity.
The manufacturer is not responsible for consequences due to non-compliance.

Technical Data

The document provides extensive technical specifications in a table format, covering:

Electrical Characteristics: Standard (IEC/EN 61010-1), Power Distribution System (TN-S), Rated Voltage (100-240V AC), Insulation Voltage (500V), Dielectric Strength (2500V AC for 1 minute), Impulse Voltage (4kV), Over-voltage Category (III), Frequency (50/60Hz), Static Power (1VA), Remote Operation Power (20VA), Breaking Capacity (IAm), Residual Short Circuit Current (IAC), Rated Current (In), Rated Residual Current (IΔn).
Reclosing Characteristics: Reclosing Time Interval (10s, 60s, 300s), DIN Module Width (1), Max Operation Frequency (30 operations/hour), Electrical Life (10000), Max Auto Reclose Cycle (3), Reset Method (move mode slider 3 times within 10 seconds after locking).
Environmental Characteristics: Pollution Grade (2), Work Temperature (-25°C to +60°C), Storage Temperature (-40°C to +70°C), Relative Humidity (55°C-RH 95%).
Protection Grade: IP20 (Outside Panel), IP40 (Inside Panel).
Terminal Part: Depends on the circuit breaker type.
Auto Reclose Function: Auto Reclose When Electric Fault Trip, Dry Contact, Reclose Stops when Fault, Reclosing Signal, Fault Signal Indicator, Function of Auto/Manual, Internal Electrical Protection (PTC).

EU Declaration of Conformity

Changyou Technology (Zhejiang) Co., Ltd. declares that the product complies with Directive 2014/35/EU. The full text is available at http://www.tongou.com/usermanuals.

WEEE Warning

Information regarding the disposal and recycling of waste electrical and electronic equipment (WEEE). Users should hand over waste equipment to designated collection points for recycling.

	EU Declaration of Conformity for Tongou Automatic Reclosing Device TOSAR-1DB00-AC1 This document is the EU Declaration of Conformity for the Tongou Automatic Reclosing Device, model TOSAR-1DB00-AC1. It confirms compliance with relevant EU harmonization directives and standards.
	Tongou TOQCB2 Smart Metering Circuit Breaker User Manual & Specifications Comprehensive user manual and technical specifications for the Tongou TOQCB2 Smart Metering Circuit Breaker, covering installation, functions, features, and safety guidelines.
	Tongou Smart DIN Rail Energy Meter - Operating Manual Comprehensive operating manual for Tongou Smart DIN Rail Energy Meters, covering installation, features, functions, and safety notices. Supports Wi-Fi, 4G, Zigbee, and local operation.
	TO-Q-SA1 Smart Energy Accessory User Manual Comprehensive user manual for the Tongou TO-Q-SA1 Smart Energy Accessory. Learn about installation, configuration, product features, technical specifications, and safety guidelines. Supports Wi-Fi, Zigbee, LTE, and Matter connectivity for smart home energy management.
	Tongou TO-Q-SYS Din Rail Smart Meter: Operating Manual Comprehensive operating manual for the Tongou TO-Q-SYS Din Rail Smart Meter, covering installation, configuration, features, settings, and safety guidelines. Includes model details and technical specifications.
	Tongou TO-Q-SY1-WE & TO-Q-SY2-JWE DIN Rail Smart Switch User Manual Comprehensive user manual for Tongou's TO-Q-SY1-WE and TO-Q-SY2-JWE DIN Rail Smart Switches, covering installation, operation, features like Wi-Fi and Zigbee connectivity, and safety precautions.
	Tongou TO-Q-SYS Series DIN Rail Smart Meter - Features and Specifications Explore the Tongou TO-Q-SYS Series DIN Rail Smart Meter, offering compact design, high accuracy, and LCD display for real-time monitoring of voltage, current, and power. Features include remote control, voice control, circuit protection, and energy consumption tracking.
	Tongou Smart Switch Operating Manual Comprehensive operating manual for Tongou smart switches, covering installation, configuration, features, and technical specifications for various models including TO-Q-SY2-JWT, TO-Q-SY1-ZT, and others. Details Wi-Fi and Zigbee connectivity, power monitoring, and circuit protection.