QUICK GUIDE
Connecting your PTT Voice Responder to RadioPro Talk (iOS)
((@ina iOS
Pairing your PTT Voice Responder with your iPhone via Bluetooth
A close-up image of the AINA PTT Voice Responder, a compact, black communication device. It features a prominent speaker grille, a power button with a power symbol [power-symbol], directional arrow buttons [left-arrow] [right-arrow], a PTT (Push-To-Talk) button, and a phone/call icon button [phone-icon]. A warning triangle symbol ⚠️ is visible on the top left, and the AINA logo ((@ina is centered above the speaker.
- Turn on your PTT Voice Responder by holding down the Power button [power-symbol] for more than 3 seconds. After it is on, a blinking green light [green-light] will indicate that the device is ready for pairing.
- Turn on your iPhone's Bluetooth by going to: Settings ⚙️ -> Bluetooth -> Turn on.
- Pair your PTT Voice Responder to your iPhone by selecting it from the Devices list. To know which device to select from the list, check the unique friendly name on the back of your Voice Responder. Once it has successfully paired, a blue light [blue-light] will begin blinking on your device.
A screenshot of an Apple iPhone's Bluetooth settings interface. The 'Bluetooth' toggle is switched ON (green). Under 'OTHER DEVICES', 'APTT300042' is listed, indicating the AINA PTT Voice Responder is discoverable and ready for pairing.
NOTE: The Voice Responder can only be paired with one device at a time. If you want to pair it to another device, you need to perform an Unpairing/Software reset by pressing and holding both arrow buttons [left-arrow] [right-arrow] and both PTT buttons simultaneously, until the LED turns off.
Connecting your PTT Voice Responder to RadioPro Talk
- Open RadioPro Talk and from the main Connections screen, Press the Bluetooth button [bluetooth-symbol].
- Press the PTT1 button on the PTT Voice Responder.
- Choose your device from the list.
- When the Bluetooth device page comes up, press the PTT1 button on the device again (Choose 'Yes' if you are asked to pair the Bluetooth Low Energy device).
- When the device's PTT signal is recognized, you will be able to choose "Use this device".
- From here on, this PTT Voice Responder will be used whenever you connect to a RadioPro Gateway.
A series of three screenshots from the RadioPro Talk mobile application. The first shows the 'Connections' screen with a 'Bluetooth' option. The second displays the Bluetooth pairing interface, listing 'APTT304650' as a device. The third screenshot confirms the connection status as 'Connected, PTT Recognized' for the 'Aina PTT Voice Responder'.
For more information:
For more information on how to use the RadioPro Talk application, please visit their website:
http://www.ctiproducts.com/RadioPro.html
((@ina
