Taylor T-6768R,RK & T-6768HR,HRK Pneumatic Reversible Drills

3/8" Reversible Drill | 1/2" Reversible Drill

Oiling Instructions

Oil after each use with a few drops of airtool oil through the air inlet. Run for 1 second to coat all internal parts.

Diagram

The diagram shows an exploded view of the pneumatic drill, with numbered parts corresponding to the list below. Key components include the motor housing, cylinder, rotor, chuck, and various bearings and gears.

Key Components Illustrated:

01: Motor Housing
02-06: Internal Valve/Throttle Components
07: Air Inlet
08-10: Bearing and Spring Components
11-13: Bearing and Spindle Components
14/14A: Gear Case
15: Planet Gear
16: Gear Pin
17: Trigger
18: Outer Bearing Spacer
19: Trigger Shaft
20: Bearing Support
21: Reverse Switch
22: O-Ring
24: Exhaust Deflector
25: Throttle Valve Seat
26: Throttle Valve
27: Throttle Valve Spring
28: Inlet Bushing
29: Air Strainer
30: Cover
31: 3/8" Keyless Chuck
31A: 1/2" Keyless Chuck
31B: 3/8" Chuck & Key
31C: 1/2" Chuck & Key
32: Chuck Screw
33: Spring Pin
34: Retaining Ring
35: Cylinder Pin
36: Spring Pin
37: Center Gear
38: Gear Head
39: Pin
40: Gear

Parts List

Use 90 PSI Maximum

REF #	PART #	DESCRIPTION	QTY	REF #	PART #	DESCRIPTION	QTY
1	6768R01	MOTOR HOUSING	1	22	6768R22	O-RING	1
2	6768R02	NEEDLE BEARING	1	24	6768R24	EXHAUST DEFLECTOR	1
3	6768R03	END PLATE GASKET	1	25	6768R25	THROTTLE VALVE SEAT	1
4	6768R04	REAR END PLATE	1	26	6768R26	THROTTLE VALVE	1
5	6768R05	REAR ROTOR RETAINER	1	27	6768R27	THROTTLE VALVE SPRING	1
6	6768R06	CYLINDER	1	28	6768R28	INLET BUSHING	1
7	6768R07	ROTOR BLADE (6 PER SET)	1set	29	6768R29	AIR STRAINER	1
8	6768R08	ROTOR	1	30	6768R30	COVER	1
9	6768R09	FRONT END PLATE	1	31	T-7788-KC	3/8" KEYLESS CHUCK	1
10	6768R10	BEARING	1	31A	T-7788HR-KCN	1/2" KEYLESS CHUCK	1
11	6768R11	BEARING	2	31B	T-7788-C	3/8" CHUCK & KEY	1
12	6768R12	SPINDLE	1	31C	T-7788HR-C	1/2" CHUCK & KEY	1
13	6768R13	INNER BEARING SPINDLE	1	32	6768R32	CHUCK SCREW	1
14	6768R14	GEAR CASE	1	33	6768R33	SPRING PIN	1
14A	6768R14A	GEAR CASE	1	34	6768R34	RETAINING RING	1
15	6768R15	PLANET GEAR	3	35	6768R35	CYLINDER PIN	2
16	6768R16	GEAR PIN	3	36	6768R36	SPRING PIN	1
17	6768R17	TRIGGER	1	37	6768R37	CENTER GEAR	1
18	6768R18	OUTER BEARING SPACER	1	38	6768R38	GEAR HEAD	1
19	6768R19	TRIGGER SHAFT	1	39	6768R39	PIN	3
20	6768R20	BEARING SUPPORT	1	40	6768R40	GEAR	3
21	6768R21	REVERSE SWITCH	1

Contact Information & Warranty

Taylor Pneumatic Tool Company

505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL

For warranty information & registration visit: www.taylorpneumatic.com

Phone: (561)732-1111
Fax: (561)731-4412
Toll Free: (800) 805-8665

Models: T-6768R Reversible Drill, T-6768R, Reversible Drill, Drill

File Info : application/pdf, 1 Pages, 418.28KB

T-6768R RK HR HRK ?v=1687973878

References

TaylorPneumatic.com – Taylor Pneumatic Tool Company

Adobe InDesign 15.0 (Macintosh) Adobe PDF Library 15.0

Related Documents

	Taylor T-6758R 1/4" Die Grinder - Parts and Oiling Instructions Detailed parts list and essential oiling instructions for the Taylor T-6758R 1/4" Die Grinder. Includes model information, operating pressure, and company contact details.
	Taylor T-6955 & T-6956 Palm Grip Sander Parts and Oiling Instructions This document provides part numbers, assembly diagrams, and oiling instructions for the Taylor T-6955, T-6956, T-6955B, and T-6956B 5" or 6" Palm Grip Sanders. It details the components of the sanders and specifies the maximum operating pressure.
	Taylor T-9915NG Angle Grinder with Swivel Guard Parts and Instructions Comprehensive guide for the Taylor T-9915NG Angle Grinder with Swivel Guard, including detailed parts lists, assembly diagrams, and operating instructions. Learn about oiling procedures, safety precautions, and maintenance for optimal performance.
	Taylor T-7763SH Straight Air Screwdriver Parts and Specifications Detailed parts list and operating instructions for the Taylor T-7763SH Straight Air Screwdriver, including torque specifications and oiling procedures.
	T-7700SS Scissor Shear - Parts List and Oiling Instructions Comprehensive parts list and essential oiling instructions for the Taylor Pneumatic Tool Company T-7700SS Scissor Shear. Includes detailed part numbers, descriptions, quantities, and company contact information.
	Taylor T-7701SS Straight Handle Scissor Shear Parts List and Instructions Comprehensive parts list and maintenance guide for the Taylor T-7701SS Straight Handle Scissor Shear. Includes exploded view details, oiling instructions, part numbers, quantities, and contact information for Taylor Pneumatic Tool Company.
	Taylor T-8867RN Heavy Duty Rivnut Tool Parts Schematic and Instructions Detailed parts list and exploded view schematic for the Taylor T-8867RN Heavy Duty Rivnut Tool, including oiling instructions and operating pressure specifications.