Taylor Pneumatic Tool Company

T-7700SS Scissor Shear

Oiling Instructions

Oil after each use with a few drops of airtool oil through the air inlet. Run for 1 second to coat all internal parts.

Product Diagram and Parts Identification

The diagram illustrates an exploded view of the T-7700SS Scissor Shear, showing its various components and their assembly. Key parts include the main housing, cylinder, rotor, blades (left, right, and center), gears, bearings, valve stem, air inlet, and fasteners. The numbered references in the diagram correspond to the part numbers listed in the table below.

Parts List

Ref #	Part #	Description	Qty.	Ref #	Part #	Description	Qty.
1	770001N	End Cap	1	21	770021N	Bearing	1
3	770003N	Air Inlet	1	22	770022N	Ring Gear	1
4	770004N	Pin	1	23	770023N	Planet Gear	3
5	770005N	Housing	1	24	770024N	Gear Carrier	1
7	770007N	Bearing	1	25	770025N	Bearing	2
8	770008N	End Plate	1	26	770026N	Gear Housing	1
9	770009N	Pin	1	29	770029N	Spring	1
10	770010N	Rotor	1	31	770031N	Spacer	1
11	770011N	Cylinder	1	32A	770032NA	Bearing & Nut Assem.	1
12	770012N	End Plate	1	34	770034N	Shear Housing	1
13	770013N	Rotor Blade (4 per set)	1set	35	770035N	Nut	3
14	770014N	O-Ring	1	36	770036N	Screw	3
15	770015N	Valve Stem	1		7700SS01A	Complete Head	1
16	770016N	O-Ring	1	37	7700SS22	Right Blade	1
16A	770016AN	O-Ring	1	38	7700SS33	Left Blade	1
17	770017N	O-Ring	2	39	7700SS34	Spacer	2
19	770019N	Valve Body	1	40	7700SS35	Center Blade	1
20	770020N	Trigger	1
20A	770020AN	Screw	1

Contact Information

Taylor Pneumatic Tool Company
505 N. Railroad Ave.
P.O. Box 1117
Boynton Beach, Florida 33435
Phone: (561) 732-1111
Fax: (561) 731-4412
Toll Free: 800-805-8665
For Warranty Information & Registration: www.taylorpneumatic.com

	Taylor T-7700SS Scissor Shear Parts List and Diagram Detailed parts list and exploded view diagram for the Taylor T-7700SS Scissor Shear pneumatic tool. Includes part numbers, descriptions, quantities, and operating instructions.
	Taylor T-7701SS Straight Handle Scissor Shear Parts List and Instructions Comprehensive parts list and maintenance guide for the Taylor T-7701SS Straight Handle Scissor Shear. Includes exploded view details, oiling instructions, part numbers, quantities, and contact information for Taylor Pneumatic Tool Company.
	Taylor T-9915NG Angle Grinder with Swivel Guard Parts and Instructions Comprehensive guide for the Taylor T-9915NG Angle Grinder with Swivel Guard, including detailed parts lists, assembly diagrams, and operating instructions. Learn about oiling procedures, safety precautions, and maintenance for optimal performance.
	Taylor T-7763SH Straight Air Screwdriver Parts and Specifications Detailed parts list and operating instructions for the Taylor T-7763SH Straight Air Screwdriver, including torque specifications and oiling procedures.
	Taylor T-6758R 1/4" Die Grinder - Parts and Oiling Instructions Detailed parts list and essential oiling instructions for the Taylor T-6758R 1/4" Die Grinder. Includes model information, operating pressure, and company contact details.
	Taylor T-6955 & T-6956 Palm Grip Sander Parts and Oiling Instructions This document provides part numbers, assembly diagrams, and oiling instructions for the Taylor T-6955, T-6956, T-6955B, and T-6956B 5" or 6" Palm Grip Sanders. It details the components of the sanders and specifies the maximum operating pressure.
	Taylor T-8867RN Heavy Duty Rivnut Tool Parts Schematic and Instructions Detailed parts list and exploded view schematic for the Taylor T-8867RN Heavy Duty Rivnut Tool, including oiling instructions and operating pressure specifications.
	Taylor T-6768R,RK & T-6768HR,HRK Pneumatic Reversible Drill Parts List and Diagram Exploded view diagram and parts list for the Taylor T-6768R,RK 3/8" Reversible Drill and T-6768HR,HRK 1/2" Reversible Drill. Includes oiling instructions and warranty information.