Product Overview
A white, rectangular device with a curved top, labeled 'Wifi Water Leakage Detector'. It has a wire extending from its base, splitting into two probes. A separate smaller white sensor unit is shown connected to the probes. A [Wi-Fi] symbol is visible on the main unit.
Please read this manual carefully before use and keep it for future reference.
Specifications
- Input voltage: DC3V LR03
- Static current: ≤ 10uA
- Alarm current: ≤160mA
- Low-Voltage indication: ≤2.6V
- WIFI: 802.11 b/g/n
- Installation: Wall-mounted
- Detection: Water-sensor detector
- Working Temperature: -10°C - +50°C
- Working Humidity: 95%RH
How to Use
Step 1: Prepare the Device
Push the mounting bracket downward and take out the bracket, then insert the battery. Diagram showing the mounting bracket being detached from the main unit, and an arrow indicating battery insertion.
Step 2: Insert Batteries
Put the batteries into the battery bin and place them according to the graphics in the battery bin. After two batteries are loaded, the indicator lights are always on and then off. Diagram illustrating the correct placement of two LR03 batteries within the device, showing positive and negative terminals.
Step 3: Download the App
Download the TUYA Smart APP from the App Store or Google Play Store, or scan the provided QR code. A QR code is provided for downloading the TUYA Smart APP for iOS and Android.
Step 4: Register and Add Device
Register with your mobile phone number. On the 'My Home' interface, click the '+' icon or 'Add Devices' in the middle blank. Screenshot of the TUYA Smart app 'My Home' screen, showing various connected devices. A '+' icon or 'Add Devices' button is highlighted for adding new devices. Select the security sensor and click on the 'Alarm system'. Screenshot showing the 'Add Device' interface, with categories like 'Electrical', 'Security & Sensor'. The 'Alarm system' or 'Water Leak Sensor' option is selected.
Step 5: Network Connection (Automatic Mode)
With the card pick-up pin in the accessory package, hold the reset key for more than 5 seconds, and the indicator flashes into the automatic network connection mode. Enter the Wi-Fi password according to the prompt, and click to confirm. A hand holding a small pin to press a reset button on the water leakage sensor. The sensor is white and rectangular.
Step 6: Network Connection (AP Mode)
In the automatic network connection mode, the indicator flashes quickly. To switch to manual network connection mode (AP Mode), hold the reset key for 5 seconds with the card pick-up pin; the indicator flashes slowly. The APP will prompt to choose 'AP Mode' and then 'compatible mode'. Enter the 'Wi-Fi password' and click confirmation. Then, switch to the Wi-Fi settings interface on your phone. Connect to the network named 'SmartLife_XXXX' and return to the APP to continue adding devices. Screenshot showing the 'Connecting' status within the app, with a progress indicator at 6%. Screenshot of the 'Add Device' screen, with options for 'AP Mode'. Instructions mention confirming the indicator light rapidly blinks. Screenshot guiding the user to connect their phone's Wi-Fi to the device's hotspot, named 'SmartLife_XXXX'.
Step 7: Pairing Success and Testing
Network pairing is successful. Click the water drop button to enter the interface. Place the sensor probe into water. The water drop logo will show 'Water is detected'. Take the probe out of the water. The water drop logo will show 'No water is detected'. Screenshot showing the device successfully paired and connected. A water drop icon is displayed. Screenshot showing the water drop icon indicating 'Water is detected'. Screenshot showing the water drop icon indicating 'No water is detected'.
