Alhafidh Google TV 2K LEDTV User's Manual

Introduction

This document serves as the user's manual for the Alhafidh Google TV 2K LEDTV, specifically for models 32LG3 and 43LG3. It provides essential information for setup, operation, and troubleshooting.

For optimal performance and longevity, it is recommended to place the television in a well-ventilated area, away from moisture, direct sunlight, and excessive dust. Ensure that ventilation openings on the back cover are not obstructed.

The manual also details important safety precautions, guidelines for handling power cords and signal cables, and recommended cleaning procedures.

Important Safety Instructions

Caution: Risk of Electric Shock. Do Not Open.

The lightning flash with arrowhead symbol [⚡] within an equilateral triangle is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Refer all servicing to qualified personnel.

The exclamation point symbol [❗] within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

General Safety Precautions:

• Do not install this equipment in a confined or building-in space such as a bookcase or similar unit, and ensure good ventilation. Do not impede ventilation openings with items such as newspaper, table-cloths, curtains, etc.
• Refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.
• The mains plug/appliance couple is used as a disconnect device; the disconnect device shall remain readily operable.
• Do not expose this apparatus to rain or moisture. Do not place objects filled with liquids, such as vases, on the apparatus.
• Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
• Never place a television set in an unstable location. Many injuries, particularly to children, can be avoided by taking simple precautions such as using cabinets or stands recommended by the manufacturer, using only furniture that can safely support the television set, and not placing the television set on tall furniture without anchoring both the furniture and television set to a suitable support. Educate children about the dangers of climbing on furniture.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.

Battery Disposal

The batteries used with this product contain chemicals that are harmful to the environment. To preserve the environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer.

Product Disposal

This marking [♻️] indicates that this product should not be disposed of with other household wastes throughout the country. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.

General Operation

Switching On

Insert two batteries into the remote control. Ensure you use the specified battery types and correct polarity. Do not mix new and used batteries, or use rechargeable batteries. Remove batteries if the remote control is not used for a long period.

Connect the power cable first to the television, then to a mains socket. If the power indicator lights up, the TV is in standby mode. Press the power button on the remote control or on the TV set to turn it on.

Switching Off

To put the TV set into standby mode, press the power button. The TV remains powered up but with low energy consumption. To switch off the TV set completely, unplug the mains socket from the mains outlet.

Power Cord and Signal Cable

Ensure that nothing rests on or rolls over the power cord and signal cable. Protect them from being trampled. Do not overload the power cord or outlet. Do not expose the power cord and signal cable to moisture.

Network Connection

To access the internet, you must subscribe to a high-speed broadband internet service from your internet service provider.

Wired Connection

Requirements: An Ethernet cable, a router or modem with an available Ethernet port, and a high-speed internet connection. An Ethernet (LAN) port is located on the back of the TV.

Procedure: Connect the Ethernet cable to the router and to the Ethernet port on the back of the TV. Use the Network Settings menu to configure the TV.

Wireless Connection

Requirements: A router broadcasting a high-speed wireless signal, a high-speed internet connection, and the TV set with a Wi-Fi Module (or compatible wireless USB adapter).

Procedure: Use the Network menu to configure the TV. Some models may have an internal wireless module, making an external USB adapter unnecessary. Note that some external wireless adapters may not be compatible with the TV.

Diagram Description: A diagram illustrates a typical wired network setup, showing a modem connected to a router, which is then connected to the TV via an Ethernet cable. Another diagram depicts a wireless setup, showing a modem connected to a wireless router, and the TV connected wirelessly, possibly with a wireless USB adapter shown connected to the TV's USB port.

Troubleshooting

Most problems encountered with your TV can be resolved by consulting the following list:

• No picture, no sound: Check fuse/breaker, outlet, power plug contact, and signal source.
• No color: Adjust color system, saturation, or try another channel.
• Remote control does not work: Check/replace batteries, ensure correct installation, verify main power connection.
• No picture, normal sound: Adjust brightness and contrast; check for broadcasting issues.
• Normal picture, no sound: Increase volume, check mute status, change sound system, or check for broadcasting issues.
• Unorderly ripples on picture: Usually caused by local interference (e.g., cars, hair dryers). Adjust antenna to minimize interference.
• Blank screen in VGA mode: The PC's resolution may not be recognized. Change the PC resolution to a compatible setting.
• Snowy dots and interference: If the antenna is in a weak signal area, adjust antenna position/orientation, check connections, fine-tune channel, or try another channel. Consider a special antenna for weak signals.
• Ignition interference (black spots, horizontal streaks): Caused by interference from ignition systems, neon lamps, electric drills, or other electrical appliances.
• Ghosting: Caused by signal reflection from buildings or objects. Changing the antenna direction or position may improve reception.
• Radio frequency interference (moving ripples, diagonal streaks): Identify and remove the source of radio interference.
• TV crashed: Press the power button to turn off and then on again to reset. Alternatively, unplug the power cord, then press the power button to reset. If issues persist, contact after-sales service.

Base Installation

To install the double support base, attach it to the unit using screws as per the instructions. Ensure the installation is secure.

Diagram Description: An illustration shows the process of attaching the support base to the television unit using screws.