Diagram Overview
The diagram illustrates the MTD cultivator, showing its main components. It features a central engine unit (40) connected to a handle assembly (17, 22, 23) which includes the throttle control (13). The cultivator is supported by wheels (1) at the rear and has a rotating tine assembly at the front, comprising outer (26, 29) and inner (27, 28) tines. Other visible parts include the transmission housing (33) containing a drum clutch (31), a depth rod (34) for adjusting cultivation depth, and various fasteners like bolts (3, 6, 7, 11, 18), nuts (4, 9, 19), washers (5, 8, 10, 36, 37), and pins (12, 35). Decals (14, 15, 16, 24, 39) indicating warnings, controls, and engine information are also depicted.
Parts List
| Item No. | Part No. | Description |
|---|---|---|
| 1 | 041723 | Wheel-plastic w/tire |
| 2 | 530303 | Grip-Hand |
| 3 | 152363 | Bolt-carriage ¼-20 × 1¼ |
| 4 | 616375 | Nut-hex ¼-20 Ctr. Lock |
| 5 | 157651 | Washer-flat ¼ |
| 6 | 380352 | Bolt-hex ¼-20 × 1¼ |
| 7 | 157677 | Bolt-hex ¼-20 × 1⅝ |
| 8 | 715185 | Washer-flat 5/16 |
| 9 | 152579 | Nut-push 5/16 |
| 10 | 157818 | Washer-Felt |
| 11 | 380345 | Bolt-hex ¼-20 × 5 |
| 12 | 490037 | Pin-Clevis 5/16 × 1¼ |
| 13 | 530675 | Control-Throttle w/Cable |
| 14 | 551655 | Decal-Warning |
| 15 | 552141 | Decal-Throttle Control |
| 16 | 553347 | Decal-Caution |
| 17 | 556688 | Handle-Upper |
| 18 | 157859 | Bolt-curved head 5/16-18 x 1⅝ |
| 19 | 150235 | Nut-wing 5/16-18 |
| 20 | 110379 | Tie-cable |
| 21 | 584680 | Clutch-centrifugal |
| 22 | 558965 | Handle-Lower RH |
| 23 | 558940 | Handle-Lower LH |
| 24 | 552414 | Decal-Hand Placement |
| 25 | 574962 | Panel-Handle |
| -- | 575878 | Panel-Handle, Green |
| 26 | 575910 | Tine-Outer LH |
| 27 | 575894 | Tine-Inner LH |
| 28 | 575902 | Tine-Inner RH |
| 29 | 575928 | Tine-Outer RH |
| 30 | 592410 | Bracket-Depth Bar |
| 31 | 556787 | Drum-clutch |
| 32 | 575852 | Shield-Tine |
| 33 | 584755 | Transmission-tine drive, includes #31 |
| 34 | 592402 | Depth Rod |
| 35 | 715011 | Hairpin Cotter |
| 36 | 715094 | Washer-Spilt Lock ¼ |
| 37 | 162172 | Washer-Curved |
| 38 | 157727 | Screw-hex tap #10-16 x 1½ |
| 39 | 403683 | Decal-engine shut-off |
| 40 | * | Engine-2 cycle |
| *Contact engine manufacturer's authorized service dealer for parts and warranty. | ||
