VIHALS Shelving Unit Assembly Instructions

Safety Warnings

⚠️ WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

ALWAYS install the anti-tip device provided.
NEVER put a TV on this product.
NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
NEVER open more than one drawer at a time.
Place heaviest items in the lowest drawers.

Read and follow each step of the instruction carefully. [?] [?] [ ड्रिल ]

Tools and Parts

Required Tools:

Screwdriver (cross-head) ?
Hammer ?
Drill ड्रिल
Drill bits: Ø 8 mm (5/16"), Ø 3 mm (1/8")

Key Parts (Quantities and Part Numbers):

Feet: 2x (Part 150689)
Wall attachment brackets: 2x (Part 150688)
Screws: 2x (Part 147968), 2x (Part 158469)
Wall plugs: 2x (Part 121714)
Dowels/Connectors: 16x (Part 10051660), 12x (Part 151707), 12x (Part 151708), 6x (Part 100092), 4x (Part 10077982), 6x (Part 10093081), 6x (Part 10093082), 6x (Part 10061178), 4x (Part 10077982), 2x (Part 327495)
Cam lock parts: 6x (Part 10005905), 4x (Part 10077982), 6x (Part 10100254), 6x (Part 10100255), 6x (Part 10100256), 6x (Part 10107020)
Door hinges: 3x (Part 10093081), 3x (Part 10093082)
Door handles: 6x (Part 151707), 6x (Part 151708)
Back panel support: 1x (Part 10077982)

Assembly Steps

Step 1

Attach the feet (2x Part 150689) to the underside of the bottom panel.

Step 2

Insert dowels (e.g., 100092) into the designated holes on the side panels. Connect one side panel to the bottom panel.

Step 3

Insert dowels into the second side panel. Connect it to the bottom panel and the first side panel.

Step 4

Attach the top panel using cam lock mechanisms and dowels. This typically involves inserting cam lock screws and then turning cam locks to secure the connection (e.g., 6x Part 10061178 and associated cam lock parts).

Step 5

Insert shelf supports (e.g., 6x Part 10100254, 10100255, 10100256, 10107020) into the pre-drilled holes on the inner sides of the unit. Place the shelves onto these supports.

Step 6

Attach the back panel support (1x Part 10077982) to the rear of the unit using screws (e.g., 4x Part 100092).

Step 7

Slide the back panels into the grooves provided on the rear edges of the unit.

Step 8

Secure the back panels in place using screws (e.g., 6x Part 151708).

Step 9

Attach the door hinges (e.g., 3x Part 10093081, 3x Part 10093082) to the doors and the corresponding mounting points on the unit frame.

Step 10

Mount the doors onto the unit by connecting the hinges.

Step 11

Attach the door handles (e.g., 6x Part 151707, 6x Part 151708) to the doors.

Step 12

Attach the anti-tip hardware to the top rear of the unit. This typically involves a bracket (Part 150688) and a screw (Part 147968).

Step 13

Secure the unit to the wall using the anti-tip hardware. Follow the instructions for your wall type:

For solid walls (A): Drill a Ø 8 mm hole, insert a wall plug (Part 121714), and screw in the bracket.
For hollow walls (B): Drill a Ø 8 mm hole, insert a wall plug (Part 121714), and screw in the bracket.
For solid wood (C): Drill a Ø 3 mm hole and screw in the bracket directly without a plug.

If uncertain, seek professional advice.

Step 14

Ensure the unit is stable and correctly positioned before proceeding with wall attachment.

Step 15

Check that the unit is level.

Step 16

Secure the unit to the wall using the anti-tip bracket and screws, ensuring it is firmly attached.

Step 17

Perform a final check of all connections and the overall stability of the unit.

Step 18

Detail of wall mounting connection.

Step 19