Installation Guide for Marathon Lighting models including: ML-WM-8083, ML-WM-2089-120W, ML-WM-8083 ML-WM-2089-120W Wall Pack, ML-WM-8083 ML-WM-2089-120W, Wall Pack, Pack
ML-WM-8083 – Marathon Lighting
hon Lighting Installation Instruction Operating temperatue: -104°C to 122°C Input voltage range: 120-277V, 50/60 HZ Note: Add a bead of exterior grade silicone sealant around the perimeter of the wall pack on the wall to inhibit any moisture from attachment bolts. Junction Box Installation 1. CD 1, Unscrew the 2 screws on the right with a screwdriver 2, Unplug the male and female connectorand ground terminal, remove the main body 3. 2. D G½ blocking cover B C 1, Open the G½ blocking cover at the back cover and drill through ABCD four holes 4. 1, The back cover is fixed on the junction box, and the cables in the box are introduced into the cavity of the back cover Hose Installation 1. 1, Connect the cable to the corresponding L/N/GND of the driver 2, Plug in the male and female connectors and connect the ground terminal 3, Tighten the screws with a screwdriver. 2. E 21,, Unscrew the 2 screws on the right with a screwdriver Unplug the male and female connectorand ground terminal, remove the main body 3. F G 1, Open the side G½ blocking cover, drill through the three holes of EFG, and fix the back cover. 4. 1, Insert the hose into the side hole and route the cable 1, Connect the cable to the corresponding L/N/GND of the driver 2, Plug in the male and female connectors and connect the ground terminal 3, Tighten the screws with a screwdriver.Adobe PDF library 15.00