TECKNET Outdoor Solar Lights
User Manual
Introduction
Thank you for purchasing TECKNET outdoor solar light. Please read this User Manual thoroughly before use of the product and retain it for future reference. If you have any problem using this product, please contact us by email at support@tecknetonline.com.
Note: Charge for 6 hours during the day before first use.
Product Overview
The TECKNET Outdoor Solar Light includes the following components:
- Screw Hole: For mounting the light.
- Solar Panel: Captures sunlight for charging the battery.
- PIR Motion Sensor: Detects movement to activate lighting.
- Power Button: Used to turn the light on and select lighting modes.
Diagram Description: The front of the solar light shows a rectangular solar panel at the top, followed by the main light array. Below the light array is the PIR motion sensor. The back view indicates mounting points.
Specifications
- Battery Voltage: 3.7V
- Solar Panel Ratings: 5.5V / 0.65W
Installation
- Select a position where the solar panel can get enough sunshine. Mount the solar light to the exact position using the provided screws and plastic anchors.
- Press the power button to turn on the light and select a desired lighting mode.
Diagram Description:
- Method 1: Shows the light being mounted directly to a flat surface using screws.
- Method 2: Shows the light being mounted to a surface using screws and plastic anchors inserted into pre-drilled holes.
Notes on Operation
- The solar light will not light up in the daytime or in a bright area after you select the mode. It will light up at night or in a dark area.
- The solar panel charges quicker under strong sunlight. It charges slowly or not at all under weak sunlight. Charging time depends on sunlight intensity.
- Lighting time depends on the energy generated by the solar panel during the day.
Lighting Modes
The solar light comes with 3 modes. Press the Power Button to change the lighting mode.
- Medium Light Mode (Stay On at Night): The solar light charges during the day and automatically turns on with medium light in dark surroundings or at night.
- Dim Light Sensor Mode: The solar light charges during the day and automatically turns on with dim light in dark surroundings or at night when no motion is detected. It switches to bright light when motion is detected and stays on for about 15-25 seconds. It returns to dim light when no motion is detected.
- Bright Light Sensor Mode: The solar light charges during the day and automatically turns on with bright light in dark surroundings or at night when motion is detected, staying on for about 15-25 seconds. The light turns off when no motion is detected.
Precautions
- Keep the solar panel surface clean to collect sunlight more effectively.
- The built-in battery may lose power if there is no good sunlight for several days, preventing the light from turning on at night. It will operate normally once sufficient sunlight is available.
- In extreme cold temperatures, or on cloudy, rainy, or snowy days, the battery may not be fully charged, potentially reducing the duration of bright light.
- Do not disassemble the product to maintain its waterproof feature.
FAQs
- Q: How to use the outdoor solar light effectively in winter when the daytime is short?
A: Use the third mode in winter: Bright Light Sensor Mode (press 3 times). This optimizes solar energy use and prolongs product life. - Q: What should I do if I fail to turn on the light when I receive the product?
A: During long transportation, the light's power may be exhausted. Please charge the solar light under the sun for 6 hours before first use. - Q: What should I do if the product does not light up after charging?
A: The lights only turn on at night or in dark surroundings. If using the Bright Light Sensor Mode, it activates at night only when motion is detected. It will not turn on during the day or in a bright place at night. - Q: The solar panel is covered. Will this affect normal use of the light?
A: If the solar panel is covered by heavy dust, snow, etc., the covered part may heat up (the "Hotspot Effect"), potentially damaging the panel. Ensure there are no obstructions around the solar panel during installation to avoid reduced power generation efficiency.
Important Safety Instructions
- Retain these instructions. This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories, and device.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire to avoid an explosion.
- Do not place the product in or near an inflammable, explosive, or hazardous object.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Limited 12-Month Warranty
What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.
Period of coverage: Unichain warrants the TECKNET product for 12 Months.
What will we do to correct problems: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty: All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty: Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.
Disclaimer: Every effort has been made to ensure that the information and procedures in this guide are accurate and complete; no liability can be accepted for any errors or omissions, and we reserve the right to make any changes without further notice to any products mentioned herein.
Declarations
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
SIMPLIFIED EU DECLARATION OF CONFORMITY: Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-SL001 is in compliance with Directive 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/