TECKNET Wireless Doorbell User Manual TK-WD895/TK-WD896

Introduction

Thank you for purchasing the TECKNET Doorbell. Please read this User Manual thoroughly before use and retain it for future reference. For any issues, contact support@tecknetonline.com.

Package Contents

TECKNET Doorbell Receiver x1
TECKNET Push Button x1
Double-sided Tape x1
Mounting Screws x2
Screw Caps x2
User Manual x1

Specifications

Receiver

Working Voltage: AC 100-240V, 50/60Hz
Power Consumption: 1 W

Push Button

Working Voltage: DC 3V (CR2032 x1)
Working Current: 25mA
Transmission Power: 10 dBm

Product Overview

Receiver Controls:

1. Previous Chime/Mode Button: Press to cycle through chimes or hold for 3 seconds to switch between ringing only and ringing & flashing light modes.
2. Next Chime/Pairing Button: Press to cycle through chimes or hold for over 3 seconds to enter pairing mode.
3. Volume Button: Press to select from 5 volume levels (mute, low, medium, high, and max).
4. LED Light: Indicates status.

Push Button:

5. Push Button: The button to activate the doorbell.
6. LED Light: Indicates activation.
7. Screw Hole: For mounting the push button.

Installation

Install Doorbell Receiver

Plug the doorbell receiver into an AC socket.

Install Push Button

Install with Double-sided Tape

Remove the battery isolation strip on the push button before use.
Use the included double-sided tape to stick the push button to the wall.

Install with Screws

To install, you will need: A standard screwdriver and a Phillips screwdriver.

Remove the battery isolation strip from the push button.
Use a small standard screwdriver to detach the battery cover.
Screw mount the battery cover onto the wall using the Phillips screwdriver.
Snap the Push Button onto the battery cover.

How to Use

Pair Push Button to Receiver

The push button and receiver are pre-paired and ready for use. If re-pairing is needed:

Press and hold the "Next Chime/Pairing Button" for over 3 seconds. The receiver will emit a "ding dong" sound, indicating it is in pairing status.
Press the Push Button. The receiver will play the selected chime, confirming successful pairing.

Switch Working Mode

Press and hold the "Previous Chime/Mode Button" for 3 seconds to switch between two modes: ringing only, or ringing & flashing light.

Select a Chime

Press the "Previous Chime" or "Next Chime" button once to cycle through available chimes. Stop when you hear your desired chime.

Select a Volume Level

Press the Volume Button to choose from 5 volume levels: mute, low, medium, high, and max.

Clear Pairing Record

Press and hold the Volume Button for over 5 seconds. You will hear a "ding dong, ding dong" prompt, indicating that all pairing records have been cleared. This will unpair all previously connected push buttons.

Important Safety Instructions

Retain these instructions for future reference.
Read all instructions and caution markings on the product, accessories, and device before use.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
Keep the product away from fire to avoid explosion.
Observe polarity indicators (+/-) for proper insertion.
Do not place the product near flammable, explosive, or hazardous objects.
Do not operate the product if it has been damaged.
Do not disassemble the product, as this may lead to safety hazards.
Do not throw or shake the product.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking on the product or its literature indicates it should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact their retailer or local government office for details on environmentally safe recycling. Business users should contact their supplier and check purchase terms and conditions. This product should not be mixed with other commercial wastes for disposal.

Limited 12-Month Warranty

What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser that this TECKNET product shall be free of defects in design, assembly, material, or workmanship.

Period of coverage: Unichain warrants the TECKNET product for 12 Months.

Correction of problems: Unichain will repair or replace, at its option, any defective product free of charge (excluding shipping charges).

What is not covered: Warranties are void if the product is not provided for inspection upon request, improperly installed, altered, or tampered with. The warranty does not cover acts of God (flood, earthquake, lightning, war, vandalism, theft), normal wear and tear, obsolescence, abuse, low voltage disturbances, or unauthorized modifications.

How to claim: Contact retailers, visit the TECKNET website, or email support@tecknetonline.com. To extend the warranty, register products on the TECKNET website within 90 days of purchase.

Disclaimer

Every effort has been made to ensure the accuracy and completeness of the information and procedures in this guide. However, no liability can be accepted for any errors or omissions. TECKNET reserves the right to make changes without further notice to any products mentioned herein.

Compliance Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing separation, connecting to a different outlet, or consulting a dealer or technician.

Note 2: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Simplified EU Declaration of Conformity

Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-WD895 / TK-WD896 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://teckneteu.com/

Industry Canada Compliance

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.