Panasonic ET-SFR330 Smoke Cut Filter

Introduction

This document provides essential operating instructions for the Panasonic ET-SFR330 Smoke Cut Filter. Designed for commercial use, this accessory is crucial for maintaining optimal air quality when operating compatible Panasonic projectors in environments where smoke may be present, such as stage events or other venues.

Adhering to these instructions ensures correct installation, operation, and maintenance, thereby safeguarding projector performance and longevity.

Key Information

The manual details the following critical procedures and information:

• Filter Switching: Step-by-step guidance on removing the standard air filter unit and installing the smoke cut filter.
• Safety Precautions: Important attention points and cautions to follow during filter replacement and operation.
• Configuration: Instructions on setting the projector's [FILTER TYPE] to [SPECIAL] when using the smoke cut filter.
• Maintenance: Information on the smoke cut filter replacement cycle and how to check remaining usage time.
• Troubleshooting: Solutions for issues indicated by the projector's filter status lights and error messages.

Compatibility is specified for Panasonic projector models including PT-RQ13K, PT-RZ12K, and PT-RS11K. For other projector models, users should consult the operating instructions supplied with the respective projector.

Further Information

Users are strongly advised to read the "Read this first!" section before proceeding and to retain this manual for future reference.

For more information on Panasonic projectors, visit the official website: https://panasonic.net/cns/projector/

© Panasonic Connect Co., Ltd. 2022