V-TAC Rainproof Power Supply Installation Instructions
Introduction & Warranty
Thank you for choosing a V-TAC product. This manual provides instructions for installation and use. Please read carefully before starting and keep for future reference. For any queries, contact your dealer or local vendor.
The warranty is valid for 2 years from the date of purchase. It does not cover damage caused by incorrect installation or abnormal wear and tear. The company provides no warranty against surface damage due to incorrect product removal and installation.
Products are suitable for 10-12 hours daily operation. Usage for 24 hours a day voids the warranty. This product is warranted for manufacturing defects only.
Warning: Risk of electric shock. [⚡]
This marking indicates that this product should not be disposed of with other household wastes. [♻️]
Please scan the QR code to access the manual in multiple languages.
Technical Data
| Model | SKU | Watts | Output Voltage | Output Current | Dimension |
|---|---|---|---|---|---|
| VT-21060 | 3070 | 60W | DC:12V | 5A | 125 x 74 x 42mm |
| VT-21151 | 3231 | 150W | DC:12V | 12.5A | 207 x 74 x 42mm |
| VT-21251 | 3232 | 250W | DC:12V | 20A | 218 x 95 x 50mm |
| VT-21401 | 3233 | 400W | DC:12V | 33A | 223 x 118 x 50mm |
| VT-26400 | 3265 | 400W | DC:24V | 16.6A | 223 x 118 x 50mm |
IP Rating: IP45
Warranty: 2 Years
Warnings
- Please ensure the power is turned off before starting the installation.
- Observe the connection diagram provided before connecting to the power supply.
- Installation should be performed by a qualified electrician.
- Disconnect the power supply when wiring or soldering the LED.
- Ensure the DC output of the power supply matches the DC input of the striplight.
Connection Diagram
Neutral: black or blue
Earth: yellow or yellow-green
Live: brown or red
The diagram illustrates the connection points for AC input (Live, Neutral, Earth) and DC output to an LED strip.
Installation
- Ensure the power is turned off before starting the installation.
- Connect the AC input source to the power supply and an AC plug (not included). AC plugs can be purchased at any hardware store.
- Wire the DC output of the power supply unit to the strip light.
- Note: If the strip light is supplied with a DC connector, cut off the DC connector. Use a terminal block (not included) to wire the striplight to the DC source of the power supply.
- Plug the power adapter into the socket to illuminate the entire system.
Contact Information
For any query or issue with the product, please reach out to: SUPPORT@V-TAC.EU
For more product range inquiries, please contact your distributor or nearest dealer.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
