Tomax USA AD007 Smart Plug User Manual
This document provides instructions for setting up and using the Tomax USA AD007 Smart Plug. It covers product overview, specifications, package contents, warnings, pairing procedures, and integration with voice assistants.
Product Overview
[Image: A diagram of a standard North American electrical outlet.]
The Tomax USA AD007 is a WiFi-based smart plug that allows users to control electrical appliances remotely. After pairing with a WiFi network, the plug can be turned on or off via a mobile application from anywhere with internet access.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
[Image: A smart plug with a Wi-Fi symbol indicating connectivity.]
Specifications
| Feature | Details |
|---|---|
| Model | AD007 |
| Input Voltage | 100-240V AC |
| Max Current | 10A |
| Max Power | 2200W |
| Wireless Type | Wi-Fi 2.4GHz |
| Support System | Android/IOS |
| Working Temperature | -20~50°C |
| Working Humidity | <80% |
| Material | ABS+PC |
| Fire-proof Grade | V0 |
Package Content
- 1x Smart Plug
- 1x User Manual
Warnings and Precautions
- This product is for indoor use only.
- Do not exceed the maximum load capacity (2200W / 10A).
- Do not expose the product to water or moisture.
Device Pairing and Setup
To Pair the Device (Indicator Light Blinks Rapidly):
- Power on the Smart Plug. The indicator light should begin to blink rapidly.
- Open the companion mobile application on your smartphone or tablet.
- Navigate to the 'Add Device' section within the app and select the Smart Plug.
- Ensure your smartphone and the smart plug are as close to your WiFi router as possible for a stable connection.
- Follow the app prompts to connect your phone to the device's temporary Wi-Fi network if required.
- Enter your home WiFi network credentials when prompted by the app.
- The app will then connect the smart plug to your WiFi network. A confirmation message will appear upon successful pairing.
[Image: Mobile app screen showing the 'Add Device' interface, prompting the user to select a device type.]
[Image: Mobile app screen indicating the device is connecting, showing a progress indicator.]
[Image: Mobile app screen confirming 'Device Added Successfully'.]
Resetting to Factory Default
If you encounter issues or need to reconfigure the device, you can reset the smart plug to its factory default settings. Press and hold the power button located on the smart plug for approximately 5 seconds. The indicator light will blink rapidly, confirming the reset.
Voice Control Integration
The AD007 Smart Plug is compatible with Amazon Alexa and Google Assistant, allowing for hands-free control of connected appliances.
To enable voice control:
- Ensure your smart plug is successfully paired and connected to your WiFi network.
- Open the Amazon Alexa app or Google Home app.
- Search for and enable the relevant skill or service for the smart plug (e.g., "Smart Life" or a similar service associated with the app).
- Link your account used with the smart plug's companion app.
- Discover devices. You can then control the smart plug using voice commands like "Alexa, turn on the living room plug" or "Hey Google, turn off the kitchen light."
You will need a compatible voice assistant device, such as an Amazon Echo (Echo, Echo Tap, or Echo Dot) or a Google Assistant-enabled smart speaker.
Mobile Application Features
The companion mobile application provides comprehensive control and management of your smart plug:
- Device Control: Turn connected appliances on or off remotely via the app's main interface.
- Scheduling & Timers: Set schedules for automatic on/off times, or use countdown timers for specific durations.
- Device Settings: Rename your smart plug for easier identification, check for firmware updates, and manage device sharing.
- Grouping: Create custom groups to control multiple smart plugs or devices simultaneously.
- Sharing: Grant access to control the smart plug to family members or other users.
- Usage Monitoring: (Potentially) View energy consumption data or usage statistics for connected appliances.
[Image: Mobile app screen displaying the smart plug's main control interface, showing an ON/OFF toggle button.]
[Image: Mobile app screen showing scheduling options, including timer and countdown settings.]
[Image: Mobile app screen displaying device settings, including options for renaming the device, firmware updates, and sharing.]
[Image: Mobile app screen illustrating the creation of device groups or scenes for controlling multiple devices simultaneously.]
[Image: Mobile app screen showing device sharing functionality, allowing users to grant access to family members.]
[Image: Mobile app screen potentially displaying energy monitoring data or usage statistics for the smart plug.]
[Image: Mobile app screen showing a list of connected smart devices, including the smart plug.]
