Mitsubishi Electric Refrigerator Parts List
Model: MR-LX630EM-A
Door Parts
Diagram shows the components of the refrigerator door assembly. It includes outer panels, inner liners, shelves, and mounting hardware, all indicated by numerical labels.
- 1: Outer door panel
- 2: Inner door liner
- 3: Hinge bracket
- 4: Hinge mounting plate
- 5: Upper door bin
- 6: Middle door bin
- 7: Lower door bin
- 8: Bottom door bin
- 9: Door handle mounting screw/cover
- 10: Door gasket/seal
- 11: Door bin
- 12: Door bin
- 13: Door frame section
- 14: Door frame section
- 15: Door frame section
- 16: Door frame section
- 17: Door frame section
- 18: Door frame section
- 19: Door frame section
- 20: Door frame section
- 21: Door frame section
- 22: Door frame section
- 23: Door frame section
- 24: Door frame section
- 25: Door frame section
- 26: Door frame section
- 27: Door frame section
- 28: Door frame section
- 29: Door frame section
- 30: Door frame section
Body Parts
Diagram illustrates the main body of the refrigerator, detailing the internal structure, cooling system components, compressor, insulation, and exterior panels. Various parts are identified by numbers.
- 1: Top ventilation grille
- 2: Main control panel housing
- 3: Main chassis/frame
- 4: Internal shelf support rail
- 5: Evaporator fan assembly
- 6: Compressor
- 7: Refrigeration tubing
- 8: Insulation panel
- 9: Internal partition/divider
- 10: Water tank assembly
- 11: Drain pan/tube
- 12: Adjustable leveling foot
- 13: Rear access panel
- 14: Cooling coil (evaporator)
- 15: Electrical connector
- 16: Mounting bracket
- 17: Leveling foot adjustment screw
- 18: Interior LED light strip
- 19: Air duct for fresh food compartment
- 20: Air duct for freezer compartment
- 21: Shelf support clip
- 22: Shelf support clip
- 23: Evaporator fan shroud
- 24: Electronic control board housing
- 25: Air filter housing
- 26: Wiring harness
- 27: Water inlet valve connection
- 28: Condenser unit
- 29: Condenser fan motor
- 30: Compressor mounting bracket
- 31: Terminal block
- 32: Power cord receptacle
- 33: Base support
- 34: Front leveling foot
- 35: Rear leveling foot
- 36: Compressor cover
- 37: Top panel
- 38: User interface/display panel
- 39: Air intake grille
Accessory Parts
Diagram displays various accessory components, likely including drawers, crispers, ice maker parts, and internal shelving systems, with numerical identifiers.
- 1: Upper shelf
- 2: Vegetable crisper drawer
- 3: Crisper drawer cover
- 4: Middle shelf
- 5: Drawer slide mechanism
- 6: Ice maker bin
- 7: Ice maker water fill cup
- 8: Water filter housing
- 9: Water filter cartridge
- 10: Ice storage bin
- 11: Freezer drawer
- 12: Freezer drawer slide
- 13: Freezer drawer handle
- 14: Freezer drawer assembly
- 15: Freezer drawer front panel
- 16: Refrigerator cabinet exterior
- 17: Internal component mounting bracket
- 18: Ice maker water supply line
- 19: Ice maker motor
- 20: Ice mold
- 21: Ice maker sensor
- 22: Ice maker assembly
Electrical and Unit Parts
Diagram shows electrical components and unit parts, including the main control board, fans, sensors, wiring, and power supply units, identified by numbers.
- 1: Main control board (PCB)
- 2: Front display panel
- 3: Door interlock switch
- 4: Wiring connector
- 5: Evaporator fan motor
- 6: Condenser fan motor
- 7: Temperature sensor (thermistor)
- 8: Defrost heater
- 9: Defrost thermostat
- 10: Water inlet solenoid valve
- 11: Interior lighting assembly
- 12: Power supply module
- 13: Control board mounting bracket
- 14: Wiring harness
- 15: Relay
- 16: Capacitor
- 17: Resistor
- 18: Fuse
- 19: Transformer
- 20: Ice dispenser motor
- 21: User interface connector
- 22: Terminal block
