Highlights
- 26× 10/100/1000Mbps RJ45 ports (24× 802.3af/at-compliant PoE+)
- 2× Gigabit SFP Slots
- 250W PoE Budget, with up to 30W for each PoE port*
- Easy to Use: Supports plug-and-play for instant connectivity and simple configuration for additional features
- Centralized Cloud Management via the web or the Omada app
- Up to 820ft PoE**, Remote Camera Reboot†, QoS, and Port Isolation for reliable surveillance networking
- Automatic Loop Prevention, VLAN, and IGMP Snooping
- Durable metal casing and rack mounting design
Product Pictures & Dimensions
The Omada ES228GP switch has dimensions of 440 mm (width) × 180 mm (depth) × 44 mm (height). The front panel features 24 x 10/100/1000Mbps RJ45 PoE+ ports, 2 x Gigabit SFP slots, and 2 x 10/100/1000Mbps RJ45 ports. Status LEDs and control buttons (Mode, Reset) are visible.
Omada Solution
Omada's Software Defined Networking (SDN) platform integrates network devices, including access points, switches, and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface.
The Omada solution diagram illustrates a network architecture. It shows various Omada Access Points (Ceiling Mount AP, Wall Plate AP, Outdoor AP) and Long-range Outdoor Bridges connecting to an Omada PoE Switch. The switch is connected to the internet via an Omada VPN Gateway. Management options include Cloud-based control (accessed via Web Browser or Omada App) and On-Premises Controllers (Hardware or Software). Key features of the Omada ecosystem are highlighted: Hassle-Free Cloud or On-Premises Controllers, Multi-Site Cloud Management, Zero-Touch Provisioning (ZTP)†, and Intelligent Monitoring.
Specifications
Hardware Features & Performance
| Category | Specification |
|---|---|
| Model | ES228GP |
| Interface | 26× 10/100/1000 Mbps RJ45 ports, 2× Gigabit SFP slots |
| Flash | 64 Mbit |
| General - Port Standard | IEEE 802.3: Ethernet Media Access Control (MAC) Protocol; IEEE 802.3i: 10BASE-T Ethernet; IEEE 802.3u: 100BASE-X Fast Ethernet; IEEE 802.3ab: 1000BASE-T Gigabit Ethernet; IEEE 802.3z: 1000BASE-X Gigabit Ethernet (Optical fiber); IEEE 802.3x: Flow Control; IEEE 802.1p: Traffic Class Expediting and Dynamic Multicast Filtering; IEEE 802.1q: Virtual Bridged Local Area Networks; IEEE 802.1ab: Station and Media Access Control Connectivity Discovery (LLDP) |
| PoE - PoE Standard | 802.3af/at |
| PoE - PoE Ports | 24, up to 30 W per port |
| PoE - PoE Power Budget | 250 W* |
| Performance - Switching Capacity | 56 Gbps |
| Performance - Packet Forwarding Rate | 41.664 Mpps |
| Performance - MAC Address Table | 8K |
| Performance - Packet Buffer | 4 Mbit |
| Performance - Transmission Method | Store and Forward |
| Performance - Jumbo Frame | 15 KB |
| Performance - Power Supply | 100-240V~ 50/60Hz 4.0A |
| Performance - Max Power Consumption | 289.9 W (with 250 W PD connected) @ 220V/50Hz 25 °C; 297.7 W (with 250 W PD connected) @ 110V/60Hz 25 °C |
| Performance - Max Heat Dissipation | 988.56 BTU/hr (with 250 W PD connected) @ 220V/50Hz 25 °C; 1015.16 BTU/hr (with 250 W PD connected) @ 110V/60Hz 25 °C |
| Physical & Environment - Standby Power Consumption | 13.79 W (220 V/50 Hz @ 25 °C); 14.84 W (110 V/60 Hz @ 25 °C) |
| Physical & Environment - Noise | 38.6 dBA max @ 1m |
| Physical & Environment - Surge Protection | Ethernet port: ±6 kV in common mode; Power port: ±4 kV in differential mode; ±4 kV in common mode |
| Physical & Environment - ESD Protection | Air: ±8 kV, Contact: ±4 kV |
| Physical & Environment - MTBF | 228,544 h @ 25 °C; 157,623 h @ 40 °C |
| Physical & Environment - Dimensions (W x D x H) | 17.3×7.1×1.7 in (440×180×44 mm) |
| Physical & Environment - Fan Quantity | 2 |
| Physical & Environment - Installation | Desktop/Rackmount Installation |
| Operating Temperature | -5 °C to 50 °C (23 °F to 122 °F) |
| Storage Temperature | -40 °C to 70 °C (-40 °F to 158 °F) |
| Operation Humidity | 10% to 90% RH, non-condensing |
| Storage Humidity | 5% to 90% RH, non-condensing |
| Certification | CE, FCC, RoHS |
Software Features
| Category | Features |
|---|---|
| Model | ES228GP |
| SDN Support |
|
| L2 Features |
|
| L2 Multicast |
|
| VLAN |
|
| QoS |
|
| Management |
|
Notes and Disclaimers
These functions require the use of the Omada Controller. Zero-Touch Provisioning requires the use of Omada Central (Omada Central Standard or Omada Central Essentials).
* PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary due to client limitations and environmental factors.
** When Extend Mode is enabled, the speed of ports that support 820ft (250m) PoE transmission will be downgraded to 10 Mbps. Actual transmission distance may vary depending on the quality of the cables.
Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders. © 2025 TP-Link
