Makita VC007GL Cordless Vacuum Cleaner - Parts List
Exploded View Diagrams
The following diagrams illustrate the various components of the Makita VC007GL Cordless Vacuum Cleaner. Each part is identified by a number for reference in the parts list.
Diagram 1 (Pages 1-3)
This diagram shows the main body, motor housing, dust collection system, and various external components of the vacuum cleaner. Key parts include the main housing (32), motor (26), dustbin (29), filters (2, 105, 106, 107), wheels (124), and various covers and connectors.
Diagram 2 (Pages 4-7)
This diagram details internal components, including the control board, switches, wiring, and smaller assemblies. Notable parts include the switch (009, 014), controller (011, 025), motor DC (026), and various bearings (039, 064, 066) and seals (059, 096, 098).
Parts List
The following table provides a comprehensive list of parts for the Makita VC007GL Cordless Vacuum Cleaner. It includes the item number, part number, description, and quantity required.
| Item | Part Number | Description | Qty |
|---|---|---|---|
| 001 | 266351-3 | Vis taraudeuse à tête bombée 4X35 (Threaded screw, pan head 4x35) | 9 |
| 002 | 413B26-9 | Bouton d'interrupteur (Switch button) | 1 |
| 003 | 234273-5 | Ressort boudin 20 (Coil spring 20) | 2 |
| 004 | 141L64-8 | Capuchon cpl (Cap assembly) | 1 |
| C10 | 8059E1-0 | CAUTION LABEL | 1 |
| C20 | 413K73-4 | Manche (Handle) | 1 |
| C30 | 413K74-2 | Clip coffret (Case clip) | 4 |
| 005 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 1 |
| 006 | 413K69-5 | Logement supérieur (Upper housing) | 1 |
| 007 | 413K68-7 | Logement inférieur (Lower housing) | 1 |
| 008 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 1 |
| 009 | 651910-0 | Interrupteur D2VW-01-3HS (Switch D2VW-01-3HS) | 1 |
| 010 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 2 |
| 011 | 620D39-7 | Sous controleur (Sub controller) | 1 |
| 012 | 961013-5 | Circlip (EXT) E-7 | 1 |
| 013 | 451343-7 | Support de commutateur (Switch support) | 1 |
| 014 | 650014-5 | Interrupteur 1703.4803 (Switch 1703.4803) | 1 |
| 015 | 961062-2 | Circlip (EXT) E-12 | 1 |
| 016 | 620F40-4 | Circuit de contrôle (Control circuit) | 1 |
| 017 | 213054-0 | Joint torique 9 (O-ring 9) | 1 |
| 018 | 141L61-4 | Base du commutateur B complet (Switch base B complete) | 1 |
| C10 | 8056M3-4 | INDICATION LABEL | 1 |
| 019 | 451344-5 | Regulateur d'interrupteur (Switch regulator) | 1 |
| 020 | 213176-6 | Joint torique 14 (O-ring 14) | 1 |
| 021 | 451342-9 | Gâchette allongée (Extended trigger) | 1 |
| 022 | 638A19-1 | Unité responsable (Responsible unit) | 1 |
| 023 | 141L63-0 | Capuchon complet (Cap complete) | 1 |
| 024 | 632L47-4 | Unité du connecteur (Connector unit) | 1 |
| 025 | 620G98-9 | Contrôleur (Controller) | 1 |
| 026 | 629B77-4 | Moteur dc (DC motor) | 1 |
| 027 | 454207-4 | Boîtier d'engrenage (Gear housing) | 1 |
| 028 | 911003-8 | Vis à tête cylindrique M3X6 WR (Cylindrical head screw M3x6 WR) | 2 |
| 029 | 266351-3 | Vis taraudeuse à tête bombée 4X35 (Threaded screw, pan head 4x35) | 6 |
| 030 | 422929-4 | Filtre de bloc arrière (Rear block filter) | 2 |
| 031 | 266351-3 | Vis taraudeuse à tête bombée 4X35 (Threaded screw, pan head 4x35) | 2 |
| 032 | 141L58-3 | Séparateur complet (Separator complete) | 1 |
| 033 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 2 |
| 034 | 267067-3 | Rondelle plate 12 (Flat washer 12) | 1 |
| 035 | 226285-2 | Engrenage interne 42 (Internal gear 42) | 1 |
| 036 | 226283-6 | Engrenage droit 15 (Spur gear 15) | 3 |
| 037 | 153228-0 | Engrenage droit 9 complet (Spur gear 9 complete) | 1 |
| 038 | 226284-4 | Engrenage droit 15 (Spur gear 15) | 3 |
| 039 | 211375-4 | Roulement à billes 6805LLB (Ball bearing 6805LLB) | 1 |
| 040 | 135554-9 | Axe entrainement (Drive shaft) | 1 |
| 041 | 267464-3 | Rondelle plate 34 (Flat washer 34) | 1 |
| 043 | 688131-1 | Filtre de ligne (Line filter) | 1 |
| 043-1 | 688131-1 | Filtre de ligne (Line filter) | 1 |
| 044 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 4 |
| 045 | 413B40-5 | Couvercle terminal (Terminal cover) | 2 |
| 046 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 4 |
| 047 | 183U06-0 | Ensemble du boîtier à bornes (Terminal box assembly) | 1 |
| 048 | 232722-6 | Ressort du carter 4 (Housing spring 4) | 4 |
| 049 | 632T08-2 | Unité de borne (Terminal unit) | 2 |
| 049-1 | 632W79-7 | TERMINAL UNIT | 2 |
| 050 | 183W98-1 | TERMINAL CASE SET | 1 |
| 051 | 232472-3 | Ressort boudin 2 (Coil spring 2) | 4 |
| 052 | 413B41-3 | Levier de verrouillage (Locking lever) | 4 |
| 053 | 652031-1 | Vis à tête cylindrique M3X6 (Cylindrical head screw M3x6) | 4 |
| 054 | 183X55-5 | BATTERY COVER SET | 1 |
| C10 | 8059D9-7 | XGT LOGO LABEL | 1 |
| 055 | 231456-8 | Ressort boudin 7 (Coil spring 7) | 1 |
| 056 | 413K71-8 | Crochet couvercle battery (Battery cover hook) | 1 |
| 059 | 422926-0 | Bague en caoutchouc (Rubber ring) | 1 |
| 060 | 413K59-8 | Carter moteur (Motor housing) | 1 |
| 061 | 629B75-8 | Redresseur (Rectifier) | 1 |
| 062 | 413K60-3 | Chicane (Baffle) | 1 |
| 063 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 2 |
| 064 | 210022-4 | Roulement à billes 626DDW (Ball bearing 626DDW) | 1 |
| 065 | 519777-1 | ROTOR ASS'Y INC. 64,66 (Rotor assembly inc. 64,66) | 1 |
| 065-1 | 519777-1 | ROTOR ASS'Y INC. 64,66 (Rotor assembly inc. 64,66) | 1 |
| 066 | 211491-2 | Roulement à billes 609DDW (Ball bearing 609DDW) | 1 |
| 067 | 413K61-1 | Socle (Base) | 1 |
| 068 | 413K62-9 | Base ventilateur (Fan base) | 1 |
| 069 | 266173-1 | Vis taraudeuse à tête bombée 5X30 (Threaded screw, pan head 5x30) | 3 |
| 070 | 313062-2 | Flasque (Flange) | 1 |
| 071 | 240178-9 | Ventilateur 104 (Fan 104) | 1 |
| 072 | 253752-4 | Rondelle plate 8 (Flat washer 8) | 1 |
| 073 | 252268-6 | Écrou hexagonal M6 (Hex nut M6) | 1 |
| 074 | 347A40-6 | Couvercle du ventilateur (Fan cover) | 1 |
| 075 | 422793-3 | Bague de support (Support ring) | 1 |
| 076 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 2 |
| 077 | 413K91-2 | Porte-soupape extérieur (Outer valve holder) | 1 |
| 078 | 141L70-3 | Valve ext. cpl (External valve complete) | 1 |
| 079 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 2 |
| 080 | 413K91-2 | Porte-soupape extérieur (Outer valve holder) | 1 |
| 081 | 141L70-3 | Valve ext. cpl (External valve complete) | 1 |
| 082 | 8581H9-6 | VC007GL NAME PLATE | 1 |
| 083 | 421468-1 | Manchon d'etancheite terre (Ground seal sleeve) | 2 |
| 084 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 1 |
| 085 | 413K94-6 | Bouchon d'étanchéité (Seal cap) | 1 |
| 086 | 141L69-8 | Couvercle de reservoir cpl (Reservoir cover complete) | 1 |
| 087 | 413K83-1 | Crochet (Hook) | 2 |
| 088 | 213304-3 | Joint torique 20 (O-ring 20) | 1 |
| 089 | 413K93-8 | came 8400 (Cam 8400) | 1 |
| 090 | 413K92-0 | Porte-soupape intérieur (Inner valve holder) | 1 |
| 091 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 2 |
| 092 | 141L71-1 | Valve interieur complet (Inner valve complete) | 1 |
| 093 | 141L71-1 | Valve interieur complet (Inner valve complete) | 1 |
| 094 | 413K92-0 | Porte-soupape intérieur (Inner valve holder) | 1 |
| 095 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 2 |
| 096 | 422944-8 | Bague d'étanchéité A (Seal ring A) | 1 |
| 097 | 638A41-8 | Unité responsable (Responsible unit) | 2 |
| 098 | 422932-5 | Bague d'étanchéité B (Seal ring B) | 2 |
| 099 | 413K75-0 | Support avant L (Front support L) | 1 |
| 100 | 413K76-8 | Support avant R (Front support R) | 1 |
| 101 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 6 |
| 102 | 413K84-9 | Couvercle intérieur (Inner cover) | 1 |
| 103 | 266351-3 | Vis taraudeuse à tête bombée 4X35 (Threaded screw, pan head 4x35) | 4 |
| 104 | 413K85-7 | Support arrière (Rear support) | 1 |
| 105 | 1911B7-8 | Ensemble du filtre à poudre H (Powder filter assembly H) | 2 |
| 106 | 1911B4-4 | Ensemble amortisseurs (Damper assembly) | 2 |
| 107 | 1911B5-2 | Ensemble de préfiltre (Pre-filter assembly) | 2 |
| 108 | 413K86-5 | Plaque supérieure (Upper plate) | 1 |
| 109 | 127480-6 | Loquet complet (Latch complete) | 1 |
| 110 | 422943-0 | Bague d'étanchéité C (Seal ring C) | 1 |
| 111 | 266374-1 | Vis taraudeuse à tête bombée 4X25 (Threaded screw, pan head 4x25) | 3 |
| 112 | 266420-0 | Vis taraudeuse à tête bombée 5X20 (Threaded screw, pan head 5x20) | 2 |
| 113 | 422934-1 | Butoir B (Bumper B) | 1 |
| 114 | 457853-2 | Plaque de support (Support plate) | 1 |
| 115 | 457852-4 | Servante (Feeder) | 1 |
| 116 | 413K78-4 | Crochet du tuyau (Hose hook) | 2 |
| 117 | 141M90-3 | Réservoir complet (Tank complete) | 1 |
| C10 | 891978-6 | Étiquette d'avertissement (Warning label) | 1 |
| 118 | 649150-2 | Cable de mise a la terre 120 (Grounding cable 120) | 1 |
| 119 | 421468-1 | Manchon d'etancheite terre (Ground seal sleeve) | 1 |
| 120 | 213655-4 | Joint torique 56 (O-ring 56) | 1 |
| 121 | 457851-6 | Prise (Plug) | 1 |
| 122 | 413K82-3 | Couvercle d'entree (Inlet cover) | 1 |
| 123 | 327A50-9 | Tuyau de jonction 20-343 (Junction hose 20-343) | 1 |
| 124 | 168547-1 | Roulette 75 (Wheel 75) | 2 |
| 125 | 457862-1 | Courroie de vidange (Drain belt) | 1 |
| 126 | 422179-1 | Joint (Seal) | 1 |
| 127 | 457861-3 | Capuchon de vidange (Drain cap) | 1 |
| 128 | 347A42-2 | Plaque (Plate) | 2 |
| 129 | 413K79-2 | Roulette 170 (Wheel 170) | 2 |
| 130 | 266326-2 | Vis taraudeuse à tête bombée 4X18 (Threaded screw, pan head 4x18) | 4 |
| 131 | 961060-6 | Circlip exterieur S-20 (External circlip S-20) | 2 |
| 132 | 267299-2 | Rondelle plate 20 (Flat washer 20) | 2 |
| 133 | 422933-3 | Butoir A (Bumper A) | 1 |
| 134 | 413K80-7 | Enjoliveur (Bezel) | 2 |
| 135 | 266351-3 | Vis taraudeuse à tête bombée 4X35 (Threaded screw, pan head 4x35) | 4 |
| A01 | 199455-5 | Ensemble d'assemblage de buse (Nozzle assembly) | 1 |
| A02 | 195433-3 | Kit de tuyau complet 28-3.5 (Hose kit complete 28-3.5) | 1 |
| C10 | 417191-4 | Verrouillage du brassard (Hose clamp) | 1 |
| C20 | 417586-1 | Barre d'arret (Stop bar) | 1 |
| C30 | 417662-1 | Manche (Handle) | 1 |
| C40 | 417766-9 | Coude avant 38 (Front elbow 38) | 1 |
| C50 | 417765-1 | Coude avant 22 (Front elbow 22) | 1 |
| C60 | 424379-9 | Coude avant 24 (Front elbow 24) | 1 |
| A03 | 195434-1 | Kit de tuyau complet 38-2.5 (Hose kit complete 38-2.5) | 1 |
| C10 | 417191-4 | Verrouillage du brassard (Hose clamp) | 1 |
| C20 | 417306-3 | Manche (Handle) | 2 |
| C30 | 417307-1 | Coude avant (Front elbow) | 1 |
| C40 | 417586-1 | Barre d'arret (Stop bar) | 2 |
| A04 | 1910R3-2 | Sacs jetables dechets (Disposable dust bags) | 1 |
| A05 | 192563-1 | Ensemble du tuyau droit (Straight hose assembly) | 1 |
| A06 | 192562-3 | Jeu de tubes courbés (Curved tube set) | 1 |
| A07 | 410306-2 | Suceur plat (Floor nozzle) | 1 |
| A08 | 195547-8 | Ensemble du manchon avant 22 (Front sleeve assembly 22) | 1 |
| A09 | 195546-0 | Ensemble du manchon avant 24 (Front sleeve assembly 24) | 1 |
| A11 | 451350-0 | Barre d'arret (Stop bar) | 1 |
| A12 | 911138-5 | Vis à tête cylindrique M4X20 WR (Cylindrical head screw M4x20 WR) | 1 |
| A13 | 198900-7 | Cle bluetooth (Bluetooth key) | 1 |
| A13-1 | 198900-7 | Cle bluetooth (Bluetooth key) | 1 |
| A13-2 | 198900-7 | Cle bluetooth (Bluetooth key) | 1 |
| F08 | 1910N0-0 | Ensemble du filtre pour eau (Water filter assembly) | 1 |
| F43 | 1914Y6-9 | Ensemble buse à brosse rotative (Rotary brush nozzle assembly) | 1 |
| F44 | 1914Y7-7 | Ensemble buse à brosse rotative (Rotary brush nozzle assembly) | 1 |
| F45 | 1915W7-9 | BRUSH COMPLETE SET | 1 |
| F96 | 422A02-6 | Capuchon (Cap) | 1 |
| G09 | 1912G4-5 | Jeu de tubes télescopiques complets (Telescopic tube set complete) | 1 |
| G10 | 1912G5-3 | Ensemble du tube cintré complet (Curved tube assembly complete) | 1 |
| G11 | 413R35-4 | Barre d'arret (Stop bar) | 1 |
Please indicate the part number when ordering.
Related Documents
 |
Makita VC013GL Cordless Vacuum Cleaner Parts List and Diagrams Detailed parts list and exploded view diagrams for the Makita VC013GL Cordless Vacuum Cleaner, including part numbers, descriptions, and quantities for easy identification and replacement. |
 |
Makita DCL284F Cordless Cleaner Parts List and Diagram Detailed parts list and exploded view diagram for the Makita DCL284F Cordless Cleaner, including part numbers and descriptions. |
 |
Makita VC006GM Cordless Vacuum Cleaner Parts List and Diagrams Detailed parts list and exploded view diagrams for the Makita VC006GM Cordless Vacuum Cleaner, including part numbers, descriptions, and quantities. |
 |
Makita DCL283F Cordless Cleaner Parts List and Diagrams This document provides a detailed parts list and exploded view diagrams for the Makita DCL283F Cordless Cleaner, including part numbers, descriptions, and quantities. |
 |
Makita VC011G DC Backpack Vacuum Cleaner Parts List and Diagrams Detailed parts list and exploded view diagrams for the Makita VC011G DC Backpack Vacuum Cleaner, including part numbers, descriptions, and quantities. |
 |
Makita VC012G DC Backpack Vacuum Cleaner Parts List This document provides a detailed parts list and exploded view diagrams for the Makita VC012G DC Backpack Vacuum Cleaner. It includes part numbers, descriptions, and quantities for all components. |
 |
Makita DS5000 Drill Parts Diagram and List This document provides a comprehensive parts list and exploded view diagram for the Makita DS5000 drill. It includes part numbers, descriptions, and quantities to aid in service and repair. |
 |
Makita HP2070 Hammer Drill Parts Diagram and List Detailed parts diagram and list for the Makita HP2070 1.010W 13mm hammer drill, including part numbers and names for maintenance and repair. |