This document provides a comprehensive parts list and visual breakdown for the Makita VC013GL Cordless Vacuum Cleaner.
Main Assembly Diagrams
Exploded View (Page 1 of 2)
This diagram illustrates the primary housing and internal components of the VC013GL. Key parts include the main top cover assembly (004), the battery cover assembly (002), and the hose hook (003). Internally, it shows various electrical and mechanical sub-assemblies such as the switch base (011), controller units (018, 019, 035), the motor housing set (040, 041) containing the motor's stator (037) and rotor (038), and the fan assembly (042-048) which includes the fan base (042), fan (045), and fan cover (048). Other components like the separator (031) and terminal units (022, 023) are also depicted.
Exploded View (Page 2 of 2)
This diagram focuses on the filter and tank components of the VC013GL. It details the float assembly (050), seal ring A (051), the main filter (052), damper (053), and pre-filter (054). The main tank (056) and its associated latch (057) are also shown, indicating how these parts integrate into the vacuum cleaner's dust collection system.
Parts List
| Item | Sub Parts No. | Parts Description | Qty | I/C | E/C No. | Close No. | Remark |
|---|---|---|---|---|---|---|---|
| 001 | 4131X7-5 | HANDLE | 1 | ||||
| 002 | 137262-8 | BATTERY COVER ASSEMBLY | 1 | ||||
| 003 | 4131X6-7 | HOSE HOOK | 2 | ||||
| 004 | 137312-9 | TOP COVER ASSEMBLY | 1 | ||||
| C10 263005-3 | RUBBER PIN 6 | 2 | |||||
| C20 891977-8 | CAUTION LABEL | 1 | |||||
| 005 | 8150P3-1 | VC013GL NAME PLATE | 1 | ||||
| 006 | 455733-6 | SWITCH LEVER | 1 | ||||
| 007 | 213176-6 | O RING 14 | 1 | ||||
| 008 | 451344-5 | SWITCH DIAL | 1 | ||||
| 009 | 213054-0 | O RING 9 | 1 | ||||
| 010 | 1410V2-2 | CAP COMPLETE | 1 | E0710 | |||
| 010-1 | 1413F4-4 | CAP COMPLETE | 1 | < | E0710 | ||
| 011 | 1410V5-6 | SWITCH BASE COMPLETE | 1 | ||||
| 012 | 961062-2 | STOP RING E-12 | 1 | ||||
| 013 | 961013-5 | STOP RING E-7 | 1 | ||||
| 014 | 650066-6 | SWITCH 1703.4704 | 1 | ||||
| 015 | 451343-7 | SWITCH HOLDER | 1 | ||||
| 016 | 266326-2 | TAPPING SCREW 4X18 | 2 | ||||
| 017 | 620R97-7 | INDICATION CIRCUIT | 1 | ||||
| 018 | 620D39-7 | SUB CONTROLLER | 1 | ||||
| 019 | 620R91-9 | CONTROLLER | 1 | ||||
| 020 | 266326-2 | TAPPING SCREW 4X18 | 2 | ||||
| 021 | 1831K5-9 | TERMINAL CASE SET | 1 | ||||
| C10 263005-3 | RUBBER PIN 6 | 2 | |||||
| D10 | INC. 23 | ||||||
| 022 | 632W77-1 | TERMINAL UNIT | 1 | ||||
| 023 | 1831K5-9 | TERMINAL CASE SET | 1 | ||||
| C10 263005-3 | RUBBER PIN 6 | 2 | |||||
| D10 | INC. 21 | ||||||
| 024 | 8150P4-9 | VC013GL SERIAL NO. LABEL | 1 | ||||
| 025 | 4131W9-4 | TANK COVER | 1 | ||||
| 026 | 266374-1 | TAPPING SCREW 4X25 | 8 | ||||
| 027 | 213A93-6 | O-RING 55 | 1 | ||||
| 028 | 4131X4-1 | INLET | 1 | ||||
| 029 | 266326-2 | TAPPING SCREW 4X18 | 4 | ||||
| 030 | 4131W3-6 | STAY | 1 | ||||
| 031 | 1410U8-3 | SEPARATOR COMPLETE | 1 | ||||
| C10 422C10-9 | BAND DAMPER B | 1 | |||||
| C20 422C11-7 | BAND DAMPER C | 1 | |||||
| 032 | 422794-1 | RUBBER RING | 1 | ||||
| 033 | 632W57-7 | LEAD UNIT | 1 | ||||
| 034 | 266490-9 | TAPPING SCREW PT 2X6 | 3 | ||||
| 035 | 620F39-9 | CONTROLLER B | 1 | ||||
| 036 | 652069-6 | FLAT HEAD SCREW M3X6 | 3 | ||||
| 037 | 629C29-1 | STATOR | 1 | ||||
| 038 | 619704-9 | ROTOR | 1 | ||||
| 039 | 266326-2 | TAPPING SCREW 4X18 | 4 | ||||
| 040 | 183U05-2 | MOTOR HOUSING SET | 1 | ||||
| D10 | INC. 41 | ||||||
| 041 | 183U05-2 | MOTOR HOUSING SET | 1 | ||||
| D10 | INC. 40 | ||||||
| 042 | 4131X1-7 | FAN BASE | 1 | ||||
| 043 | 266326-2 | TAPPING SCREW 4X18 | 3 | ||||
| 044 | 313062-2 | FLANGE | 1 | ||||
| 045 | 240243-4 | FAN 80 | 1 | ||||
| 046 | 253752-4 | FLAT WASHER 8 | 1 | ||||
| 047 | 252268-6 | HEX. NUT M6 | 1 | ||||
| 048 | 347D45-4 | FAN COVER | 1 | ||||
| 049 | 422C08-6 | SUPPORT RING | 1 | ||||
| 050 | 140G00-1 | FLOAT COMPLETE | 1 | ||||
| 051 | 422364-6 | SEAL RING A | 1 | ||||
| 052 | 162518-0 | FILTER COMPLETE | 1 | ||||
| 053 | 422449-8 | DAMPER | 1 | ||||
| 054 | 162635-6 | PRE FILTER | 1 | ||||
| 055 | 422C07-8 | SEAL RING B | 1 | ||||
| 056 | 4131X0-9 | TANK | 1 | ||||
| 057 | 162315-4 | LATCH | 2 | ||||
| A01 | 140G04-3 | HOSE COMPLETE | 1 | ||||
| A02 | 199486-4 | SHOULDER BELT SET | 1 | ||||
| A03 | 4132U6-2 | SASH NOZZLE | 1 | ||||
| A04 | 458891-7 | WIDE NOZZLE | 1 | ||||
| F02 | 191Y12-5 | HOSE COMPLETE SET | 1 | ||||
| F03 | 1912G4-5 | TELESCOPIC PIPE COMPLETE SET | 1 | ||||
| F04 | 1912G5-3 | BENT PIPE COMPLETE SET | 1 | ||||
| F05 | 1914Y6-9 | ROTARY BRUSH NOZZLE SET | 1 | ||||
| F06 | 1914Y7-7 | ROTARY BRUSH NOZZLE SET | 1 | ||||
| F07 | 1915G5-1 | CASTER SET | 1 | ||||
| F08 | 1915G6-9 | HOSE COMPLETE 28-5 SET | 1 | ||||
| F12 | 1915W5-3 | PAPER FILTER BAG SET | 1 | ||||
| F13 | 191657-9 | ROUND BRUSH SET 38 BLK | 1 | ||||
| F14 | 192236-6 | TAPERED NOZZLE SET | 1 | ||||
| F15 | 192563-1 | STRAIGHT PIPE SET 565-38 | 1 | ||||
| F16 | 195432-5 | POLY BAG SET(650X650) | 1 | ||||
| F17 | 195548-6 | JOINT 22-38 SET | 1 | ||||
| F21 | 199486-4 | SHOULDER BELT SET | 1 | ||||
| F22 | 199827-4 | PRE FILTER SET | 1 |
Interchangeability Notes
The following notes explain the interchangeability codes used in the parts list:
- O: Yes - Indicates interchangeability.
- X: No - Indicates no interchangeability.
- <: The new part can be substituted for the current part.
- >: The current part can be substituted for the new part.
- S: Interchangeable as a set.
