Kumatsugen KAG110 Angle Grinder - Parts Diagram
Model: KAG110
Article Number: 082651
Version: 1
Date: 2025/07
Exploded View of Components
The following diagram illustrates the various components of the Kumatsugen KAG110 angle grinder. Each part is numbered for easy identification.
- Washer
- Washer
- Guard
- Spindle
- Screw
- Bearing
- Bearing Retainer
- Screw
- Washer
- Gear
- Bearing
- Spacer
- Gear Housing
- Screw
- Screw
- Screw
- Gear Shaft
- Bearing
- Gear
- Bearing
- Washer
- Nut
- Washer
- Flange
- Motor Housing
- Switch
- Screw
- Screw
- Screw
- Switch Lever
- Housing Cover
- Housing Cover
- Screw
- Screw
- Motor
- Cable Clamp
- Switch Wire
- Switch Wire
- Handle
- Wrench
Component Identification
This section provides a detailed breakdown of the parts shown in the diagram:
- 1 & 2: Washers - Used for securing components and providing smooth rotation.
- 3: Guard - Protects the user from debris during operation.
- 4: Spindle - The rotating shaft to which the grinding disc is attached.
- 5: Screw - Fastens various parts of the grinder.
- 6 & 11: Bearings - Allow for smooth rotation of shafts and gears.
- 7: Bearing Retainer - Holds bearing in place.
- 8: Screw - Fastens components.
- 9: Washer - Used for securing components.
- 10: Gear - Transmits power from the motor to the spindle.
- 12: Spacer - Maintains correct spacing between components.
- 13: Gear Housing - Encloses and protects the gear mechanism.
- 14, 15, 16: Screws - Used for assembly of the gear housing and motor housing.
- 17: Screw - Fastens components.
- 18: Bearing - Facilitates smooth rotation.
- 19: Gear - Part of the gear train.
- 20: Gear Shaft - Shaft for gears.
- 21: Bearing - Facilitates smooth rotation.
- 22: Washer - Used for securing components.
- 23: Nut - Secures the grinding disc or accessory.
- 24: Washer - Used for securing components.
- 25: Flange - Mounts the grinding disc.
- 26: Motor - Provides the power for the tool.
- 27: Motor Housing - Encloses and protects the motor.
- 28, 29, 30: Screws - Used for assembly.
- 31: Switch Lever - Activates the tool's power.
- 32: Housing Cover - Part of the main body.
- 33: Screws - Used for assembly.
- 34: Screw - Fastens components.
- 35: Screw - Fastens components.
- 36: Cable Clamp - Secures the power cord.
- 37: Switch Wire - Connects the switch to the motor.
- 38: Switch Wire - Connects the switch to the motor.
- 39: Switch - Controls the power to the motor.
- 40: Handle - Provides a grip for operating the tool.
- 41: Wrench - Tool for tightening or loosening nuts and bolts.
Manufacturer Information
This product is associated with Kumatsugen and Nikolaou Tools.
