KitchenAid Cordless Hand Blender Quick Start Guide

Getting Started

1. Charge the Battery

   Charge the battery until full using the USB Cable and USB Adapter, or the Docking Station (sold separately). Clean all parts of the Hand Blender.

   [Diagram: Shows the charging process: a USB cable connecting the blender handle to a power adapter, or the blender base placed on a docking station.]

2. Assemble the Blending Arm

   To insert the Pan Guard, angle the Blending Arm to one side of the mounting clip. Gently pull the other mounting clip outward and push down the Blending Arm. Insert the Blending Arm into the handle and twist to lock.

   [Diagram: Illustrates the assembly of the blending arm. It shows the arm being angled, a clip being pulled, and the arm being inserted into the handle with a twisting motion to lock.]

3. Insert the Battery

   Insert the battery into the slot located at the top of the appliance, ensuring it is aligned. The LED ? will light up and display the battery status ? for five seconds, then turn off.

   [Diagram: Shows the battery being inserted into the top of the blender handle. An LED indicator is depicted, showing it lights up briefly.]

4. Start Blending

   Insert the Cordless Hand Blender into the mixture. Press and hold the [Unlock Button] ⚙️ first, then the [Speed Control] ▶️ to start.

   [Diagram: Shows the blender head immersed in a mixture. Callouts point to the 'Unlock Button' and the 'Variable Speed Controller'.]

5. Blending Technique

   Use an upward motion with the Cordless Hand Blender to move ingredients within the jar. Slowly draw it upwards against the side of the jar. Repeat the process until ingredients reach the desired consistency.

   [Diagram: Demonstrates the blending technique: the blender is shown moving upwards against the side of a jar, with circular arrows indicating motion.]