Hansgrohe Talis Classic Faucet: Installation and User Guide

Introduction

This document provides installation and usage instructions for the Hansgrohe Talis Classic faucet series, including models 14111XXX, 14116XXX, 14118XXX, and 14120XXX.

Safety Instructions ⚠️

• Wear gloves ? during installation to prevent crushing and cutting injuries.
• The product is intended solely for bathing, hygiene, and body cleansing purposes.
• Ensure that pressure differences between hot and cold water supplies are balanced.

Installation Instructions

Follow these steps for proper installation:

• The fitting must be installed, flushed, and tested according to valid norms.
• If you encounter issues with instantaneous water heaters or require increased water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Installation Steps Overview:

• Step 1: Insert the faucet body into the sink or countertop opening.
• Step 2: From below, secure the faucet using the provided mounting hardware, typically a retaining nut and bracket.
• Step 3: Connect the flexible water supply hoses to the corresponding hot and cold water inlets on the faucet and to the water supply lines.
• Step 4 (Temperature Adjustment): For single-lever mixers with hot water limitation, refer to page 33 for adjustment instructions. This adjustment is not necessary when using a continuous flow water heater.

Technical Data

Symbol Descriptions

• 38° Symbol ?️: Indicates the adjustment of the hot water limiter on single-lever mixers. No adjustment is needed when using a continuous flow water heater.
• Silicone Tube with 'X' ??: Do not use silicone containing acetic acid.
• Ruler Icon: Refers to dimensions, detailed on pages 34-35.
• Flow Diagram Icon: Refers to flow rate diagrams on pages 34-35, illustrating flow with and without EcoSmart®.
• Parts Icon ⚙️: Indicates spare parts are available, detailed on page 38.
• Wrench Icon ?: Signifies special accessories, such as the mounting tool (58085000), which is not included in the delivery package.
• Hand Cleaning Icon ✨: Refers to Operation (page 36) and Cleaning (page 37).
• Checkmark Icon ✅: Indicates a test certificate is available on page 39.

Operation

To operate the faucet:

• Open/Close: Lift the lever upwards to open the water flow ▶️, and push it down to close ?.
• Temperature Control: Move the lever to the left for hot water ◀️ and to the right for cold water ▶️.

Quick Clean Function ✨

The QuickClean feature allows for easy manual cleaning of the aerator. Lime scale deposits can be removed from the spray channels by simply rubbing them with your finger or a soft cloth.

Technical Drawings and Flow Diagrams

Detailed technical drawings showing dimensions for various Talis Classic models (14111XXX, 14116XXX, 14118XXX, 14120XXX) are provided on pages 34-35.

Flow rate graphs on pages 34-35 illustrate the relationship between water pressure (MPa) and flow rate (l/min or l/sec). These graphs typically show two curves: one representing the faucet with the EcoSmart® flow limiter engaged, and another representing the flow without it.

Spare Parts

An exploded view diagram and a list of spare parts are available on page 38 for reference.

Certifications and Approvals

Details regarding product certifications and approvals can be found on page 39.