MPOW iSnap X2 Selfie Stick Tripod

Diagram

The Mpow iSnap X2 Selfie Stick Tripod package includes:

• 1 x Selfie Stick Tripod
• 1 x Remote Control
• 1 x Battery
• 1 x User Manual

Parts Identification:

1. Phone Holder
2. Aluminum Alloy Rod
3. Remote Control
4. Handle
5. Tripod
6. Support Frame

Pairing

Step 1: Enter Pairing Mode. Long press the camera key for 2 seconds until the green LED light flashes.

Step 2: Connect via Bluetooth. Turn on the Bluetooth function on your phone and select "Mpow iSnap X2". The green light will turn off if paired successfully.

Tips: Long press the camera key for another 2 seconds to turn it off.

Operation

1. Use the Phone Holder

Rotate the phone holder 180° to the front of the selfie stick.

Unfold the folded side of the phone holder.

2. Install Your Phone

(1) Tightly push the clip to the right to mount your phone and make sure it is securely clamped. Avoid blocking the side button of your phone.

(2) Extend the Rod.

3. Adjust the Angle

The phone holder can be rotated 90° vertically and 360° horizontally.

4. Unfold and Fix the Tripod

Unfold the tripod and push the center column upward until the tripod is fully expanded and stable. Place it on a flat surface to take photos.

5. Remove the Remote Control

Push the remote control up to take it out.

Tips: Remove the insulating strip before use.

6. Take Pictures with the Remote Control

The remote control has a wireless range of 10m / 33ft.

Tips: Please make sure you've set your phone's volume button as the shutter.

7. Fold the Selfie Stick Tripod

Reverse the unfolding process to fold the selfie stick tripod.

Battery Replacement

When the power is low due to long-term use, tightly push the battery cover of the upper part of the remote control upward to replace the new button battery.

Tips:

1. The remote control will automatically sleep and the light turns off after 2 minutes if without any operation. Click the camera key to wake it up.
2. The remote control will automatically turn off after 30 minutes if without any operation. Press the camera key for 2 seconds to turn it on.