Introduction
Welcome to the Mpow X6 Wireless Earbuds. This manual provides detailed instructions for using your new earbuds.
Product Overview
The Mpow X6 are hybrid active noise cancelling wireless earbuds designed for an immersive audio experience.
Getting Started
Powering On and Pairing:
- The earphones automatically turn on and start pairing when you open the charging case. A white LED light will flash.
- To turn off, place the earphones back into the charging case and close the lid.
- To manually turn on, press and hold the multifunction button on both earbuds for 1.5 seconds.
- To manually turn off, press and hold the multifunction button on both earbuds for 5 seconds.
Charging:
- Ensure the charging case is charged. Connect the USB-C cable to the charging port.
- The LED indicator on the charging case shows the charging status.
Using Your Mpow X6
Music Playback:
- Play/Pause: Double-tap the multifunction button on either earbud.
- Next Track: Triple-tap the multifunction button on the right earbud.
- Previous Track: Triple-tap the multifunction button on the left earbud.
Calls:
- Answer/End Call: Double-tap the multifunction button on either earbud.
- Reject Call: Press and hold the multifunction button on either earbud for 1.5 seconds.
Voice Assistant:
- Activate: Triple-tap the multifunction button on the left earbud.
Noise Cancelling Modes:
- ANC On: Press and hold the multifunction button on the right earbud for 1 second.
- Transparency Mode: Press and hold the multifunction button on the right earbud for 1 second again.
- ANC Off: Press and hold the multifunction button on the right earbud for 1 second a third time.
Troubleshooting
If you experience issues with pairing or sound quality, try resetting the earbuds. Place both earbuds in the charging case, keep the lid open, and press and hold the multifunction buttons on both earbuds for 10 seconds until the white LEDs flash three times.
Specifications
Refer to the product packaging or Mpow website for detailed specifications.
Safety Information
Please read all safety instructions before use to prevent injury or damage.