House of Marley Positive Vibration XL ANC

Quick Start Guide

Inside the Box

The package contains:

A. Headphones
B. Charging Cable (USB-C to USB-A)
C. Aux Cable with Microphone and 1-Button Remote
D. Stash Bag
E. Warranty Information
F. Quick Start Guide
G. Welcome Cards
H. Sticker

Components

The headphones have the following components:

A. Power On/Power Off, Play/Pause, Make/End Phone Calls button
B. Volume Up/Track Forward button
C. Volume Down/Track Backward button
D. Earcups
E. Headband Adjustment
F. 3.5mm Line In Port
G. LED Indicator
G. USB-C Charging Port
H. ANC Indicator
I. ANC Mode button
J. Monitor Mode button

Status and LED Indication

Status	LED Indication
Low Power	Blinking Red
Charging	Solid Red
Pairing Mode	Fast Blinking Blue
Bluetooth® Not Connected	Fast Blinking Blue
Bluetooth® Connected	Slow Flash Blue
Phone Call	Slow Flash Blue

Power On/Off

Press and hold the Power button for 4 seconds to turn the headphones on or off.

Pair Device

1. Turn on the headphones.

2. On your device, go to Bluetooth settings and select 'Positive Vibration XL ANC' to connect.

Pair New Device

To pair a new device, press and hold the Power button for 2 seconds until the LED indicator flashes blue. Then, select 'Positive Vibration XL ANC' on your device.

Clear Pairing

To clear all paired devices, press and hold the Power button for 8 seconds.

Music Control

Play/Pause: Press the Power button once.
Track Forward: Press the Power button twice.
Track Backward: Press the Power button three times.
Volume Up: Press and hold the '+' button.
Volume Down: Press and hold the '-' button.

Make/End Phone Calls

Answer/End Call: Press the Power button once.
Reject Call: Press and hold the Power button for 2 seconds.

3.5mm Stereo Line In Jack

Connect the included Aux cable to the 3.5mm Line In Port to use the headphones with non-Bluetooth devices.

Charging

Connect the USB-C cable to the USB-C Charging Port and a power source. The LED indicator will turn solid red while charging and turn off when fully charged.

Cable Functionality

Answer Call: Press the button once.
End Call: Press the button once.
Reject Call: Press and hold the button for 2 seconds.
Play/Pause: Press the button once.
Forward Track: Press the button twice.
Backward Track: Press the button three times.
Voice Siri/Google: Press and hold the button for 3 seconds.

ANC Activation

Press the ANC button once to activate or deactivate Active Noise Cancellation (ANC).

Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Battery Disposal: Batteries must not be disposed of in domestic waste. Please dispose of batteries in designated collection points.

WEEE Explanation: This marking indicates that this product should not be disposed of with other household wastes throughout the EU. Recycle responsibly to promote the sustainable reuse of material resources.

Important Safety Information

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Full instruction and warranty details can be found at http://www.thehouseofmarley.com/instructionbooks

	House of Marley Positive Vibration Riddim Quick Start Guide Quick start guide for the House of Marley Positive Vibration Riddim Bluetooth headphones, covering setup, controls, and basic operations.
	House of Marley Positive Vibration 2 BT Wireless Headphones: Warranty & Instructions Comprehensive warranty information, safety guidelines, and usage instructions for the House of Marley Positive Vibration 2 BT wireless headphones. Covers product care, battery replacement, regulatory compliance (FCC, EU), and important safety notices.
	House of Marley Positive Vibration Frequency Bluetooth Headphones Quick Start Guide A quick start guide for the House of Marley Positive Vibration Frequency Bluetooth headphones, covering unboxing, charging, pairing, and music/call controls.
	House of Marley Get Together 2 Bluetooth Speaker Quick Start Guide Concise guide to setting up and using the House of Marley Get Together 2 Bluetooth speaker, covering components, controls, Bluetooth pairing, stereo and multi-pair modes, EQ settings, and important compliance information.
	House of Marley Exodus Quick Start Guide A quick start guide for the House of Marley Exodus headphones, covering unboxing, components, pairing, music control, calls, voice assistant, and compliance information.
	House of Marley Get Together Go Bluetooth Speaker: Quick Start Guide and Features Get started with your House of Marley Get Together Go Bluetooth speaker. This guide covers components, controls, pairing modes (Bluetooth, Stereo Pair, Auracast), EQ settings, LED indicators, and important compliance information.
	Marley Get Together Duo Quick Start Guide: Setup, Bluetooth Pairing, and Controls Concise guide to setting up and using your Marley Get Together Duo wireless Bluetooth speakers, including pairing instructions, input connections, controls, and LED indicators.
	House of Marley Smile Jamaica TWS Quick Start Guide Your essential guide to setting up, pairing, and using your House of Marley Smile Jamaica TWS True Wireless Earbuds. Includes controls, troubleshooting, and warranty information.