Hoover H-FREE 300 Cordless Vacuum Cleaner User Manual

Assembly Instructions

Follow these steps to assemble your Hoover H-FREE 300 cordless vacuum cleaner:

1. Step 1: Identify the main body of the vacuum cleaner.
2. Step 2: Attach the handle to the main body. You will hear a '[Click]' sound when it is securely in place.
3. Step 3: Attach the dust container assembly to the main body. This also secures with a '[Click]'.
4. Step 4: Connect the floor head attachment to the bottom of the main unit.
5. Step 5: The vacuum cleaner is now assembled.

Charging the Battery

To charge the battery:

• Place the vacuum cleaner on its charging base or connect the charger directly.
• The battery indicator will show the charging status. A full charge typically takes approximately 5 hours.
• A full battery is indicated by 100% charge.

Operating the Vacuum Cleaner

To operate the vacuum cleaner:

• Press the power button to turn the vacuum '[ON]' or '[OFF]'.
• Mode Selection:
  • Standard Mode: Press the power button once for standard suction power.
  • Turbo Mode: Press the power button again to engage Turbo mode for increased suction.
  • Auto Mode: (If applicable to your model) The vacuum may automatically adjust suction power based on floor type.
• Battery Status: The display shows the remaining battery level, from 5% to 100%. When the battery is below 5%, it is recommended to charge it.

Maintenance

Regular maintenance ensures optimal performance:

• Dustbin Emptying:
  • Press the release button to detach the dust container.
  • Open the dustbin and empty the contents into a waste receptacle.
• Filter Cleaning:
  • Remove the filter from the dust container.
  • Clean the filter according to instructions (e.g., wash with water, allow to dry completely).
• Using Attachments: The vacuum comes with various attachments for different cleaning tasks, such as crevice tools (long, narrow nozzle) and brush tools (with bristles). Refer to the diagrams for specific usage.