JBL PRX412M Technical Manual
Specifications
Acoustic & Electrical Specifications
- Nominal Impedance: 8 Ohms
- System Power Rating, Pink Noise: 300W/600W / 1200W, 2 hrs (Continuous/Program/Peak)
- Frequency Response (±3 dB): 62 Hz - 19 kHz
- Frequency Range (-10 dB): 50 Hz - 20 kHz
- Maximum SPL: 120 dB SPL peak (126 dB SPL peak)
- System Sensitivity: 95 dB SPL 1 watt @ 1 meter
- Crossover Frequency: 2.0 kHz
Aural Sweep Test Specifications
- System Aural Sweep Test: 7V Input, 40 Hz to 20 kHz
- L.F. Aural Sweep Test: 2.83V Input, 43 Hz - 3.8 kHz
- H.F. Aural Sweep Test: 0.75V Input, 500 Hz to 1.5 kHz
Physical Specifications
- Enclosure Dimensions (H x W x D): 645 x 380 x 345 mm (25.25 x 15.0 x 13.5 in.)
- Net Weight: 38 lb (17.5 kg.)
Warranty Information
- Refer to Warranty Statement packed with each product.
System Components
- Cabinet: Enclosure (Not For Sale)
- Grille: 444685-002
- Low Frequency Transducer: MB112-8, 305 mm (12 in) Cone woofer
- D.C. Resistance: 5.0 ohm
- High Frequency Transducer: 2414H-C, 25 mm polymer diaphragm compression driver
- D.C. Resistance: 3.60 ohm +/- 0.2 ohm
- Input Cup Assembly: 5011406
Package Contents
- Warranty Card: 59660
- Manual: 5011443
- Carton: 5013389
- Filler: 5013390
- Filler, Bottom: 5011448
- PKG, Microfoam (4): 49790P
Wiring Diagram
The wiring diagram illustrates the connections for the low and high frequency drivers. The low frequency driver (5013391) is connected via yellow/black and green/black wires. The high frequency driver (2414H-C, 5000169X) is connected via a yellow wire. Both drivers connect to the Input Cup Assembly (5011406).
Note: Individual parts for the crossover are not available. A complete replacement assembly should be ordered.
Component Exploded View
The exploded view shows the assembly of the JBL PRX412M speaker. Key components include:
- Enclosure Assembly for PRX412M (Not Available for Sale)
- Grille Assembly (444685-002)
- Grille Support (2) (444708-001)
- Horn (338800-001)
- Gasket, Horn (351577-001)
- Driver, Low Freq. (5013391)
- Driver, High Freq. 2414H-C (5000169X)
- Input Cup Assembly (5011406)
- Input Cup (5011410)
- Input Cup Gasket (5013128)
- Handle Cup (444686-001)
- Gasket, Handle (444827-001)
- Handle Bar Assembly (364855-003)
- Feet (8) (444707-001)
- Bracket, Side (6) (444777-002)
- Various screws, bolts, and T-nuts are also listed with their respective part numbers and specifications.
Input Cup Assembly Schematic (5011406)
The schematic for the Input Cup Assembly (5011406) details the internal circuitry, including resistors (R1, R2, R3, R4), capacitors (C1, C2, C3, C4), and inductors (L3, T2). It shows the connections from the Neutrik Connector (NLJ2MD-V) to the high and low frequency drivers, with specific wire gauges and lengths indicated.
Note: Individual Parts for the above crossover are not available. A complete replacement assembly should be ordered.