Installation Guide for HARMAN models including: 6.5 Inch Club Marine, 6.5 Inch, Club Marine, Marine

109CBM10

109CBM10, JBL Club Marine 10 10" Marine Sub w RGB, WWW.CRUTCHFIELD..COM

HNEWBERRY

JBL Club Marine 12 owner's manual

JBL Club Marine 12 Club Marine Series 12" 4-ohm marine subwoofer with built-in RGB LED lighting at Crutchfield


File Info : application/pdf, 5 Pages, 2.07MB

PDF preview unavailable. Download the PDF instead.

109CBM10
JBL Club 6.5", 8", 10", and 12" Marine Speaker

Installation Guide

EN

Guide d'installation

FR

Guía de instalación

ES

   RU

JBL Club 6.5", 8", 10", and 12" Marine Speaker

83.7mm (3-5/16")

THANK YOU FOR YOUR PURCHASE ...
Your JBL product has been designed to provide you with the performance and ease of operation you would expect from JBL.
EN
ABOUT THE MANUAL
This manual describes general installation guidelines. However, please note that proper installation of marine audio components requires qualified experience. If you do not have the knowledge and tools to successfully perform this installation, we strongly recommend consulting an authorized JBL dealer about your installation options. Keep all instructions and sales receipts for reference.

WHAT'S IN THE BOX

Club 6.5" and 8" speakers

2X

4X

2X

12X 12X 1X

2X 2X

2X

1X

169.5mm (6-3/4")

112.3mm (4-7/16")

Club 8" speaker
225mm (8-7/8")
170mm (6-11/16")
Club 10" speaker
273mm (10-3/4")
221.5mm (8-3/4")
Club 12" speaker
325mm (12-13/16")

127.5mm (5-1/16")

154.5mm (6-1/16")

198.5mm (7-13/16")

Club 10" and 12" speakers

1X

2X

1X

6X 6X 1X

1X 1X

2X

1X

DIMENSIONS
Club 6.5" speaker
178mm (7-1/64")

280mm (11-1/16")
SPEAKER SIGNAL WIRING
To send signal to the JBL marine speaker, connect the positive (+) and negative (-) speaker wires to the appropriate speaker outputs of your source unit or amplifier. Be sure to observe proper polarity.
+
+RGB

91mm (3-19/32") 65mm (2-9/16")

133mm

_

(5-1/4")

SPEAKER LED WIRING

To provide power for the LEDs, plug the 24-gauge black (+), blue, green, and red LED wires from the speaker into the included female connector, then run the wires from the female connector to your compatible 12-volt power source or light controller (sold separately). If using a separate controller, be sure to connect each wire to the proper output.

Blue

Green

Red

To power source

To speaker

Black

EN

If hardwiring the LEDs directly to your power source, you can choose the color of the LEDs by connecting the black wire to the positive (+) terminal, and the appropriate R, G, and/or B single wire or combination of wires to the negative (-) terminal.
There are 7 possible colors, depending on the wiring configuration you choose:

Wire connected to positive (+12V) terminal
Black

Wire connected to negative (-) terminal

Color produced

Red

Red

Green

Green

Blue

Blue

Red + Green

Yellow

Red + Blue

Purple

Blue + Green

Aquamarine

Red + Blue + Green White

APPLYING FOAM SEAL
To help seal your installation against water, and to provide an airtight acoustic seal, apply the self-adhesive foam seal to the speaker frame.

2. Make sure that the sticker above the tweeter with the arrow and "TOP" printed on it is aligned with the arrow facing upward. This will ensure the speaker terminals are facing downwards to allow water to drain away from them, and that the grille orientation will be correct. Remove the sticker after speaker installation.
ATTACHING THE GRILLE
To attach either the white or grey grille, place it over the speaker at a slight angle and press down. Then twist it clockwise just a few degrees to lock into place. Make sure the JBL logo is at the bottom.
MOUNTING THE CLUB 10" OR 12" IN AN ENCLOSURE
The Club 10" and 12" subwoofers can be mounted in a free-air application, or in a sealed or ported subwoofer enclosure.

MOUNTING THE SPEAKER
1. Use the included screws and drill bit to mount the speaker to the location. Use the included speed clips if necessary to provide a secure mount.
NOTE: It might be necessary to drill new speaker-mounting holes at the mounting location. Use caution when cutting and using screws with fiberglass to prevent scratches and cracks.

SEALED-BOX VOLUME (INCLUDES DRIVER DISPLACEMENT)

EN

VBOX
Speaker size 10"
12" *Recommended

Enclosure Size Free air 0.75 ft3 (21.2L)* 1.25 ft3 (35.4L) 2.25 ft3 (63.6L) 3 ft3 (85L) Free air 1.25 ft3 (35.4L) 1.74 ft3 (49.3L)* 2.25 ft3 (63.6L) 3 ft3 (85L)

Tuning frequency 44.9Hz 61.8Hz* 55.6Hz 51.1Hz 49.6Hz 34.3Hz 56.5Hz 51.2Hz* 47.9Hz 44.9Hz

VENTED-BOX VOLUME (INCLUDES DRIVER DISPLACEMENT)

VBOX

Speaker Enclosure Port

size

size

length

1.18 ft3 (33.5L)*

9-7/8" (250mm)*

1.25 ft3

9-7/8"

(35.4L)

(250mm)

10"

2.25 ft3

11-13/16"

(63.6L)

(300mm)

3 ft3 (85L)

7-7/8" (200mm)

Port diameter
3-1/16" (78mm)*
3-3/16" (81mm)
4-7/8" (123mm)
5-3/4" (146mm)

Tuning frequency 34Hz*
34Hz
34Hz
34Hz

Speaker Enclosure Port

size

size

length

1.25 ft3 (35.4L)

11-13/16" (300mm)

2.25 ft3

11-13/16"

(63.6L)

(300mm)

12"

3 ft3

9-7/8"

(85L)

(250mm)

3.12 ft3 (88.5L)*

9-7/8" (250mm)*

Port diameter
2-5/8" (66mm)
3-7/8" (97mm)
4-1/2" (113mm)
4-5/8" (117mm)*

Tuning frequency 27.8Hz
27.8Hz
27.8Hz
27.8Hz*

TECHNICAL DATA (CLUB 10" AND 12" SUBWOOFERS ONLY)

THIELE-SMALL PARAMETERS

Voice coil DC resistance:

REVC (OHMs)

Electrical inductance: LCES (mH)

Driver radiating area: SD (CM2)

Motor force factor:

BL (TM)

Compliance Volume: VAS (Liters)

Suspension compliance:

CMS (mm/N)

Moving mass, air load: MMS (Grams)

Moving mass, without MMD (Grams) air load:

Free-air resonance:

FS (Hz)

Mechanical Q:

QMS

Electrical Q:

QES

Total Q:

QTS

SPL, 1W/1m @ 4ohm: Lm (dB)

Club 10" Club 12" (250mm) (300mm)

3.47

3.23

20.34 320.47 12.505 18.9086 0.13

27.98 510.71 13.051 60.6378 0.164

96.45 89.967

131.368 118.327

44.9 6.983 0.603 0.555 86.57

34.3 9.373 0.537 0.508 88.6

SPECIFICATIONS

Club 6.5"

Continuous 75W power handling

Peak power 225W handling

Frequency 50Hz ­ response 20kHz

Nominal 4 Ohm impedance

Sensitivity 92dB

External diameter

178mm (7")

Mounting cutout diameter

133mm (5-1/4")

Total depth 91mm (3-19/32")

Mounting depth

65mm (2-9/16")

Club 8" 150W
450W
30Hz ­ 20kHz 4 Ohm
92dB 225mm (8-7/8") 170mm (6-11/16")
112.3mm (4-7/16") 83.7mm (3-5/16")

Club 10" 300W
900W
25Hz ­ 500Hz 4 Ohm
89dB 273mm (10-3/4") 221.5mm (8-3/4")
169.5mm (6-3/4") 127.5mm (5-1/16")

Club 12" 400W
1200W
25Hz ­ 500Hz 4 Ohm
89dB 325mm (12-13/16") 280mm (11-1/16")
198.5mm (7-13/16") 154.5mm (6-1/16")

 

Club 6,5" Club 8" Club 10" Club 12"

 75   

150  300  400 

 

225  450  900  1200 



50  ­

 20 

30  ­ 20 

25  ­ 500 

25  ­ 500 



4 

4 

4 

4 



 92 

92 

89  89 

 

178  (7")

225  273  325  (8-7/8") (10-3/4") (12-13/16")

  

133  170  221,5  280  (5-1/4") (6-11/16") (8-3/4") (11-1/16")

 
RU

91  112,3  169,5  198,5  (3-19/32") (4-7/16") (6-3/4") (7-13/16")

 

65  83,7  127,5  154  (2-9/16") (3-5/16") (5-1/16") (6-1/16")

   :    , , 06901 , .,   400,  1500    : OOO "  ", , 127018, ., . , .12, . 1  : 1   : 3     : www.harman.com/ru  : 8 (800) 700 0467 ,     : OOO "  "                 ,     «-».      ,    2010 : 000000MY0000000,  «M» -   ( - , B - , C -   ..)  «Y» -   (A - 2010, B - 2011, C - 2012  ..).

HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com

© 2022 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.

CA_JBL Club Marine Speakers_OM_Global_SOP_V9



References

Acrobat Distiller 24.0 (Windows)