1200Mbps WiFi Range Extender Easy Setup Manual
Hello friend,
Thank you for choosing our 1200Mbps WiFi Extender. This repeater supports both 2.4G and 5G. You can use it to extend your home network coverage.
Repeater Mode Setup Guide (on phone)
Below is the quick setup guide for your reference.
Step 1: Placement and Power On
Choose a location that can receive 2-3 main router WiFi signals and plug the WiFi range extender into the socket. Then wait 15 seconds for the WiFi repeater to fully boot. (Do not plug in the Ethernet cable.)
Can you do this step?
Step 2: Connect to the Extender's WiFi
Search for the WiFi signals named "WiFi_xxxx" or "WiFi_xxxx_5G" and connect to either of them on your phone.
NOTE:
- Before setup, WiFi-xxxx and WiFi-xxxx_5G are unsecured networks and should appear normal and correct. Please proceed with the setup.
- xxxx is the last four digits of the MAC address on the device.
Can you do this step?
Step 3: Access the Admin Page
After connecting to the "WiFi_xxxx" or "WiFi_xxxx_5G" signal, please manually open a browser and type the IP address 192.168.188.1 in the address bar to enter the admin page. Enter "admin" as the password.
Can you do this step?
Step 4: Scan and Connect to Your Home WiFi
Click "Scan". Select your existing home WiFi and enter the password of your home WiFi.
Can you do this step?
Step 5: Set New SSID and Password (Optional)
You can set a new SSID and new password for this WiFi repeater. If you select "Sync With Remote Network", the repeater will combine with your home WiFi and share the same SSID and same password (it will still create a new 5G signal).
Can you do this step?
Step 6: Save and Apply Configuration
Click "SAVE & APPLY". Then please wait for about 30 seconds for the configuration to finish. Close the browser. Open your WiFi list and search for the new extender's signal, input the password to access the internet.
Enjoy your network!
Reminder: If after setup you are showing no internet connection, please enter 192.168.188.1 to check whether you have typed a wrong password. Please make sure the password is correct.
