Wireless-N Repeater Installation Guide

Model: WG-N300R REV1.1

Product Overview

This Wireless-N Repeater is designed for small business, office, and home networks, combining wired and wireless connectivity. It complies with the IEEE802.11N standard and works with IEEE802.11b/g/n wireless products. It creates an instant WiFi hotspot wherever an internet connection is available.

Main Features:

Complies with IEEE802.11B/G/N standards.
Supports Repeater Mode, AP Mode, Router Mode.
Compact and portable, providing a powerful wireless signal.
Travel size design, ideal for home and travel use.

Default Parameters

Default IP Address: 192.168.188.1

Default SSID: Wodgreat-xxxx (xxxx represents the last four digits of the equipment MAC address)

Setup Page Password: admin

Status of Indicator Lights

Indicator LED	Color	Status	Description
WAN	Green	OFF	The WAN port is not connected to the device.
WAN	Green	Flashing	The WAN port is connected to the device.
LAN	Green	OFF	The LAN port is not connected to the device.
LAN	Green	ON	Normal communication of the equipment's external network and normal data transmission.
Link LED light	Green	OFF	Abnormal external network communication or failed network connection.
Link LED light	Green	Flashing	Normal wifi emission of the equipment with data transmission.
WiFi LED light	Green	OFF	Abnormal wifi of the equipment or un-launched wifi.
WiFi LED light	Green	Flashing	Normal wifi emission of the equipment with data transmission.

Select a Best Working Method for you:

Repeater Mode: Wirelessly connect to home WiFi, extending existing WiFi range to cover larger areas.
AP Mode: Wired connection to home router via Ethernet Cable, creating a wireless access point.
Router Mode: Wired connection to home modem via Ethernet cable, creating an available network.

Connection and Configure

Let's start to configure this Wireless-N Repeater from here:

Connect to WiFi: On your phone or computer, connect to the WiFi named "Wodgreat_xxxx". (Note: xxxx is the last four digits of the equipment MAC address).
Log into admin page: Open your browser and type the IP address: 192.168.188.1 in the address bar. The password is admin.

After login, the coming page is the Repeater Mode (WISP) setup page.

Repeater Mode Setup:

Click SCAN.
Click the Connect to column, your available network list will appear. Please select your home WiFi name, the one you need to extend.
Type your home WiFi password in the Wi-Fi Password column.
(Optional) You can change the Repeater SSID to a new name. If you select "Sync With Remote Network", this WiFi repeater will combine to your home WiFi and use a same SSID.
Click SAVE & APPLY.

【Remind】 After you click SAVE & APPLY for about 10 seconds, the setup has finished. Please manually open your phone WiFi list and choose the new WiFi to connect and get access into the internet.
NOTE: If there is no internet connection, please enter the setup page 192.168.188.1 to check whether you have typed a correct password.

How to Reset device

Use a small needle to press and hold the reset button for 10 seconds. The WiFi LED will be off for a while then will flash again.

Package Contains:

1* WiFi Range Extender
1* Quick Installation Guide