Kendall Howard Performance Plus Accessory Bars

Product Overview

These instructions detail the installation of Kendall Howard's Performance Plus Accessory Bars. The accessory bars are designed to mount onto existing LAN station uprights, providing a versatile platform for additional equipment.

The product is manufactured by Kendall Howard, known for its innovative product design.

Visual Description: The product is a black metal accessory bar that attaches horizontally between two vertical uprights of a rack or station. It is typically used to mount monitors or other accessories.

Support and Disclaimer

Support

Support is available through the following methods:

Disclaimer

Kendall Howard LLC. endeavors to make this manual accurate and complete. However, Kendall Howard LLC makes no representations or warranties of any kind, expressed or implied, about whether the use of products contained herein would infringe any rights or the correctness, accuracy or reliability of the information contained herein or that said information covers all details, conditions, or variations. The information herein does not provide for every possible contingency in connection with the installation or use of the product(s). The information contained in this document is subject to change without notice or obligation. Kendall Howard LLC assumes no responsibility for the accuracy, completeness or reliability of the information contained in this document. Any reliance placed on the information is therefore strictly at your own risk.

Component Identification

What's Included?

• (2x) Mounting Brackets: Part Number: KH-7090.
  Visual Description: U-shaped black metal brackets with mounting holes.
• (1x) Accessory Bar: Available in lengths: 36" Bar (KH-7091), 48" Bar (KH-7092), 60" Bar (KH-7093), 72" Bar (KH-7094).
  Visual Description: A long, thin black metal bar.
• (4x) 1/4" Flat Washers: Part Number: HW-1008.
  Visual Description: Flat, circular metal washers with a central hole.
• (4x) 1/4"-20 x 2" Screws: Part Number: HW-PHS-002.
  Visual Description: Metal bolts with hexagonal heads and threaded shafts.
• (4x) 1/4"-20 Hex Head Nuts: Part Number: HW-1007.
  Visual Description: Hexagonal metal nuts.

Tools Needed:

• Phillips Screwdriver
  Visual Description: A screwdriver with a cross-shaped tip.
• Standard Box Wrench Set (specifically 7/16in wrench is shown)
  Visual Description: A wrench with a closed loop at one or both ends, suitable for nuts and bolts.

Installation Instructions

Step 1: Prepare the Accessory Bar

Slide both Mounting Brackets onto either end of the Accessory Bar.

Visual Description: Two U-shaped brackets are shown being slid onto the opposite ends of the long, horizontal accessory bar.

Step 2: Mount the Accessory Bar

Determine the desired height for the Accessory Bar on your LAN station uprights.

With the assistance of another person or a prop, hold the Accessory Bar in alignment with the uprights of the LAN Station.

Insert the 1/4"-20 x 2" screws through the mounting bracket and the desired position on the upright.

Place a 1/4" flat washer on the back of the upright, followed by a 1/4"-20 hex head nut.

Tighten the nuts using the appropriate wrench.

Visual Description: A close-up view shows a mounting bracket attached to a vertical rack upright. A bolt passes through the bracket and upright, secured by a washer and nut on the backside.

Step 3: Secure Hardware

Use the Phillips screwdriver and the 7/16in wrench to securely fasten all hardware.

Visual Description: An illustration showing the use of a screwdriver and wrench to tighten the bolts and nuts.

Warranty Information

General Warranty Statement

Kendall Howard offers a Limited Warranty against defects in material and workmanship for all products. This warranty sets forth responsibilities in the event of a defect and provides information on how to obtain resolution.

Terms of Warranty

Kendall Howard products are warranted to be free of defects in material and workmanship. If any part fails to conform to the warranty, Kendall Howard will, at its option, furnish new or factory remanufactured products for repair or replacement.

Warranty Extension

This Warranty extends to the first purchaser for use (the "User") and is non-transferable without prior written permission from Kendall Howard.

Assignment of Warranties

Kendall Howard assigns to the User any warranties made by manufacturers and suppliers of components, but makes no representations regarding their effectiveness or extent, and assumes no responsibility for matters warranted by third parties.

Drawings and Descriptions

Kendall Howard warrants that the product will conform to descriptions in final invoices, orders, proposals, and other descriptive documents. These are not warranties of performance or fitness for a particular purpose.

Warranty Claims Procedure

Within a reasonable time (not exceeding thirty (30) days) after discovering a defect, the User shall contact Kendall Howard. Kendall Howard will repair or replace non-conforming products without charge for materials. Labor may be charged if performed outside the initial thirty (30) days of purchase. Kendall Howard will cover shipping costs for replacement products and return of defective items after inspection confirms a defect.

Warranty Performance of Component Manufacturers

Kendall Howard may utilize third parties for warranty work to ensure prompt and effective resolution.

Items Not Covered by Warranty

This warranty does not cover damage or defects caused by misuse, improper application, incorrect electrical connections, negligence, inappropriate operating conditions, unauthorized repair, transit accidents, tampering, alterations, changes in location or use, exposure to elements, Acts of God, theft, or installation contrary to recommendations. It also does not cover installation costs, circuit breaker resetting, maintenance, or service items. Labor or shipping costs for repair/replacement are generally not included unless specified. The warranty is void if the product is altered.

Limitations

This warranty is in lieu of and excludes all other warranties, express or implied, including merchantability and fitness for a particular purpose. The User's sole remedy is repair or replacement. Kendall Howard's liability for property loss or damage shall not exceed the net product purchase price. Kendall Howard assumes no liability for indirect, special, incidental, exemplary, or consequential damages.

Miscellaneous

No salesperson, employee, or agent of Kendall Howard is authorized to alter this warranty. Modifications must be in writing and signed by a Kendall Howard officer. This warranty is effective upon receipt of full payment and supersedes all previous warranties. Kendall Howard reserves the right to change warranty terms. If any provision becomes invalid, the remaining terms remain in effect. Users must complete and return the User Information Card within thirty (30) days of receipt. This warranty is governed by the laws of the State of Nebraska and represents the entire agreement between Kendall Howard and the User.