Kendall Howard Performance Plus Corner Accessory Bar

Support

Support is available through the following methods:

• By Phone: 8:00 AM to 5:00 PM CST. 651.213.1333
• By Email: customerservice@kendallhoward.com
• By Mail: 10152 Liberty Lane, Chisago City, MN 55013, United States of America
• By Web: www.kendallhoward.com

Disclaimer

Kendall Howard LLC. endeavors to make this manual accurate and complete. However, Kendall Howard LLC makes no representations or warranties of any kind, expressed or implied, about whether the use of products contained herein would infringe any rights or the correctness, accuracy or reliability of the information contained herein or that said information covers all details, conditions, or variations. The information herein does not provide for every possible contingency in connection with the installation or use of the product(s). The information contained in this document is subject to change without notice or obligation. Kendall Howard LLC assumes no responsibility for the accuracy, completeness or reliability of the information contained in this document. Any reliance placed on the information is therefore strictly at your own risk.

Component Identification

What's Included?

Tools Needed:

Product Image Description: A black metal accessory bar designed to mount to the corner of a server rack, featuring two bracket attachments at its ends.

Installation Instructions

Step 1:

Slide both mounting brackets onto the accessory bar. Install bolts through the mounting bracket into the desired position on the server rack upright. Install flat washers and nuts from the backside of the upright.

Diagram Description: Illustration showing a mounting bracket sliding onto the end of the accessory bar. A subsequent view shows the bracket and bar aligned with a server rack upright, with a bolt passing through the bracket and the upright's mounting holes. A washer and nut are shown on the rear side of the upright.

Step 2:

With the assistance of another person or a prop, hold the accessory bar in alignment with the uprights of the server rack. Use the Phillips screwdriver and wrench to secure the hardware.

Diagram Description: Illustration depicting the completed attachment of the accessory bar to the server rack upright, with all bolts, washers, and nuts secured using the screwdriver and wrench.

Rack System Illustration Description: A typical server rack configuration shown with multiple electronic devices, including two monitors mounted on the Performance Plus Corner Accessory Bar.

Warranty

Kendall Howard offers a Limited Warranty against defects in material and workmanship for its products. This warranty is extended to the first purchaser for use and is non-transferable. It covers products free of defects in material and workmanship. Kendall Howard may, at its option, furnish new or factory remanufactured products for repair or replacement. The warranty does not cover damage or defects caused by misuse, improper application, incorrect electrical current, negligence, inappropriate operating conditions, unauthorized repair, accident in transit, tampering, alterations, changes in location or operating use, exposure to elements, Acts of God, theft, or installation contrary to recommendations. It also excludes installation costs, maintenance items, and labor or shipping costs for repairs, unless specifically provided. The warranty is void if the product is altered. All other warranties, express or implied, including merchantability and fitness for a particular purpose, are excluded. User's sole remedy is repair or replacement. Kendall Howard assumes no liability for indirect, special, incidental, exemplary, or consequential damages.

For detailed warranty terms, please visit www.kendallhoward.com.