MAULsaphir Lite 940 15 Coat Rack Assembly Guide
This document provides assembly instructions and a parts list for the MAULsaphir Lite 940 15 coat rack.
Product Identification
Brand: MAUL
Model: MAULsaphir Lite 940 15
Parts List
- Part 1: 1 x SW 13 (Hex wrench)
- Part 2: 1 x M8x40 (Bolt)
- Part 3: 1 x (Washer or base plate component)
- Part 4: 1 x (Base component)
- Part 5: 1 x (Lower pole section)
- Part 6: 2 x (Coat hook/arm)
- Part 7: 2 x (Coat hook/arm)
- Part 8: 2 x (Middle pole sections)
- Part 9: 1 x (Upper pole section)
- Part 10: 4 x (Top cap/finial)
- Part 11: 4 x (Top cap/finial)
- Part 12: 8 x (Fastener/Screw)
Assembly Instructions
The MAULsaphir Lite 940 15 coat rack is assembled by connecting several pole sections to a stable base. The process involves:
- Attaching the base component (Part 4) to the lower pole section (Part 5) using the M8x40 bolt (Part 2) and a washer/plate (Part 3). The SW 13 hex wrench (Part 1) is used to tighten the bolt.
- Joining the middle pole sections (Part 8) and the upper pole section (Part 9) to the lower section to form the main stand.
- Attaching the coat hooks/arms (Parts 6 and 7) at designated points along the pole sections.
- Securing the top of the coat rack with the caps/finials (Parts 10 and 11).
- Using fasteners/screws (Part 12) as required for assembly, likely for attaching hooks or caps.
The provided diagram illustrates the exploded view of all components and their assembly order.
Additional Information
The document also includes information regarding packaging, disposal, and warranty, with notices provided in English, French, Italian, German, and Bulgarian.
