ℹ️ Document Conversion Notice:
This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.
Philips CoreLine Etanche WT120C
WT120C G2 LED40S/840 WIA ELB3 L1200
Product Description
The Philips CoreLine Etanche WT120C is a 33 W, 1200 mm LED luminaire with a 4000 lm output and a 4000 K color temperature. It features wireless connectivity, is Interact Ready, and offers an extensive beam. The luminaire has a frosted diffuser and is IP65 and IK08 rated. It is also TW1-ready and ELB3h.
The CoreLine Etanche range offers innovative, easy-to-use, and high-quality luminaires. These products can directly replace traditional fluorescent waterproof luminaires ranging from 18 W to 58 W. With their compact and elegant design, they maintain their familiar and appreciated architecture. Installation is simple and quick due to their efficient design. The CoreLine Etanche range provides excellent light distribution with an extensive beam for simple and efficient lighting. It also includes Interact Ready luminaires with integrated wireless communications, ready for use with gateways, sensors, and Interact software.
Safety and Handling Precautions
Over time, UV rays may damage the material as the waterproofing is no longer perfect and the IP66 protection loses its effectiveness. Do not install the luminaire in a location directly exposed to sunlight.
Product Data
General Information
Replaceable light source
No
Number of apparatuses
1 unit
Driver included
Yes
Service Tag
Yes
Light source type
LED
Value added
Performance
Maintenance class
This Class B luminaire contains repairable parts (if applicable): driver, surge protection device, front cover, and mechanical parts.
Lighting Technical Data
Luminous flux
4,000 lm
Correlated color temperature (nom.)
4000 K
Luminous efficacy (nominal)
121 lm/W
Color rendering index (CRI)
>80
Color temperature
840 neutral white
Optic type
Extensive beam
Luminaire light beam spread of the luminaire
105°
UGR index
25
Functioning and Electricity
Input voltage
220 to 240 V
Line frequency
50 or 60 Hz
Inrush current
19 A
Inrush duration
0.23 ms
Power consumption
33 W
Power factor (fraction)
0.9
Connection
4-pole push-in connector
Cable
Not applicable
Number of products per 16 A type B circuit breaker
22
Suitable for random switching
Non applicable
Protection class IEC
Class electrical I
Isolation transformer
Simple connection and removable cover available for single-phase through-wiring (internal wiring not included)
Total harmonic distortion
20%
Commands and Dimming
Dimmable luminous flux
Yes
Driver / power supply unit / transformer
Wireless Interact Ready system for drivers
Control interface
Wireless
Constant luminous flux
No
Maximum dimming level
10%
Connectivity
InterAct Ready
Mechanical and Housing
Body materials
Polycarbonate
Reflector materials
Steel
Optic materials
Polycarbonate
Optical cover/lens materials
Polycarbonate
Fixing materials
Stainless steel
Body color
Gray
Optical cover/lens finish
Frosted
Total length
1215 mm
General Information
Warranty
5 years
Durability classification
4.000 lm
Color temperature
4000 K
Dimensions
Total width
80 mm
Total height
76 mm
Dimensions (height x width x depth)
76 x 80 x 1215 mm
Protection index
IP65 [Protection against dust ingress, protection against water jets]
Protection against mechanical impacts
IK08 [5 J protection against vandalism]
Net weight (piece)
2.530 kg
Emergency Function
Emergency mode flux
500 lm
Emergency duration (at full charge)
3h
Maximum electrical consumption
3 W
Additional consumption when emergency battery is charging
Not applicable
Central emergency lighting
No
Emergency lighting battery type
Lithium
Emergency lighting
3-hour emergency lighting basic version
Approvals and Application
Glow-wire test
850 °C, duration 30 s
Flammability
For mounting on easily flammable surfaces
CE marking
Yes
ENEC marking
Yes
Photobiological risk
Photobiological risk group 0 @200mm to EN62778
RoHS compliance
Yes
Ambient temperature performance Tq
25 °C
Flicker level (PstLM)
1
Stroboscopic effect level (SVM)
1.6
Ambient temperature range
0 to +25 °C
Initial Performance
Luminous flux tolerance
+/-10%
Initial chromaticity
(0.38,0.38)SDCM<=3
Initial electrical consumption tolerance
+/-10%
Lifetimes (according to IEC standards)
Apparatus failure rate at average useful life of 50,000 hours
5%
Luminous flux out at average useful life of 50,000 hours
L80
Luminous flux out at average useful life of 100,000 hours
L70
Product Data
Full product name
WT120C G2 LED40S/840 WIA ELB3 L1200
EOC code
871869997577700
Order code
8718699975777
12NC code
910505101270
Local order code
8718699975777
Numerator - Quantity per kit
1
EAN - Product/Packaging
8718699975777
Packaging type
1
EAN/UPC - Box
8718699975777
Product family code
WT130C [Coreline Waterproof G2 LSC]
Dimensional Schema
Overall Dimensions:
Maximum length: 1062 mm
Minimum length: 538 mm
Width: 80 mm
Height: 76 mm
Depth: 76 mm
Diagram Description: A line drawing showing the dimensions of the luminaire. Key dimensions indicated are 38mm, 80mm, 76mm, 1062mm (max), 538mm (min), and 76mm.
Photometric Data
Polar Diagram Description: A polar intensity diagram showing the light distribution of the luminaire. The diagram displays luminous intensity in candelas per kilolumen (cd/klm) across various angles.
Philips CoreLine Etanche WT120C LED Luminaire - Technical Specifications and Features Detailed information on the Philips CoreLine Etanche WT120C, a 30W, 1200mm LED luminaire with 4000K color temperature, extensive beam, frosted diffuser, IP65 rating, and Interact Ready capabilities. Includes technical data, safety precautions, and performance metrics.
Philips Coreline Etanche WT120C LED Lighting - Technical Specifications Detailed technical specifications for the Philips Coreline Etanche WT120C LED luminaire, including performance data, dimensions, electrical information, and safety features. This fixture offers 6500 lm, 4000K, and Interact Ready connectivity.
