Laser Tech Product Solutions
Professional Measurement
2D Lasers: Distance and Tilt
LTI's dedication to high quality and unmatched innovation has allowed its products to be used for a wide range of professional field measurement applications, from measuring distances, height, or slope values, to calculating a remote offset position with GNSS.
TruPulse® Laser Rangefinders
Withstands the test of time and has been revamped to offer new enhancements and improvements. These highly sophisticated and easy-to-operate laser rangefinders use core, reflectorless technology with TruTargeting performance built-in to every unit. They offer the user a choice of four targeting modes and display all data values right inside the sighting scope.
TruPulse® L2
- Faster acquisition and greater accuracy
- Physical, visual, and audible feedback on target acquired
- Auto calculates horizontal & vertical distance, height, and 2D missing line values
TruPulse® 200i
- Increased range & inclination accuracy
- Ultra-bright adjustable display for any lighting conditions
- Faster acquisition and greater accuracy, better target discrimination, & rugged
- Targeting Modes:
- Closest: distinguishes near and far objects and identifies the closest target
- Farthest: distinguishes near and far objects and identifies the farthest target
TruPulse® 200X
- Achieves the highest distance and inclination accuracy
- Offers adjustable LED display brightness
- Withstands conditions with rugged, waterproof housing
- Targeting Modes:
- Continuous: provides constant updates while shooting multiple targets
- Filter: measures through dense foliage by recognizing only a highly reflective target
Applications
- Electric Utilities: Span, Sag, and Tension, GIS Mapping, Vegetation Management, Pole Inventory
- Telecommunication: Site Inspection, Antenna Height, Obstruction Mapping, Material Estimate
- Forestry: Tree Heights, Slope Grades, Stem Mapping Surveys, Ecosystem Management
3D Lasers: Horizontal, Angles, Azimuth
TruPulse® 360i
- Auto calculates horizontal & vertical distance, height and 3D missing line values
- Calibrates with a simple field routine that can be completed in less than a minute
- Produces accurate and repeatable azimuth results regardless of the tilt or pitch used to aim the laser
TruPulse® 200X & MapStar® TruAngle® II
- System measures distance, inclination, and horizontal angle values with the capability to capture X,Y, and Z coordinates for 3D mapping
- Provides needed functionality and accuracy at an affordable price
- Integrate in a split GPS Pole
- Survey tripod mounting options
TruAngle® II
- Provides the needed horizontal accuracy unaffected by magnetic interfaces
- Pivot the laser rangefinder a full tilt ±90° while maintaining the rotary encoder level
- Maintains horizontal angle accuracy by using the Level Aid Alert with LED indicators
Measurement Solutions
Key: HD = Horizontal Distance, INC = Inclination, AZ = Azimuth, ML = Missing Line, SD = Slope Distance, VD = Vertical Distance, HT = Height
- 1-Shot HD Mode
- 2-Shot Height
- 3-Shot Height
- 2-Shot 2D Missing Line
- 2-Shot 3D Missing Line
Applications
- Construction: Stockpile Volumes, Site Inspection, Crane Positioning, Face Profiling
- Public Works: Land Use Planning, Facility Mapping, Asset Inventory, Emergency Response
- GIS Mapping: Remote Offset Locations, Site Inspection, Wetland Mapping/Delineation, Natural Resources
Product Specifications
2D Lasers
| Specification | TruPulse® L2 | TruPulse® 200i | TruPulse® 200X |
|---|---|---|---|
| Distance Accuracy | ± 0.5 m at < 200 m (±1.6 ft at < 656 ft) ± 1 m at 200 m - 1500 m (± 3 ft at 656 ft - 4921 ft) |
0.1 m < 1,000 m (4 in < 3,280 ft) and to a High-Quality target 0.2 m > 1,000 m (8 in > 3,280 ft) or to a Low-Quality target |
±1.6 in (±4 cm) typical targets <400m; ±6 inches (±15cm) typical targets < 1000m ±1.6 in (±4 cm) to ±1 ft (±30 cm) to distant and weak targets |
| Ranging Performance | 5 m - 2195 m (16 ft - 7,200 ft) | 50 cm - 2,500 m (20 in - 8,202 ft) | 0 m to 2,500 m (0 to 8,202 ft) |
| Inclination Accuracy | ± 0.5° Relative @ 0° to ± 30° ± 1.0° @ ± 30° to ± 90° |
0.1° @ 0° to ±30° 0.2° @ ±30° to ±90° |
± 0.1° Typical |
| Wireless Communication / App Compatibility | No | Windows® + iOS + Android® | Windows® + iOS + Android® |
| Scope Magnification / In-Scope Display Type | 5X/PDLC Display | 5X/LED HUD | 7X/LED |
3D Lasers
| Specification | TruPulse® 360i | TruPulse® 200X & MapStar® TruAngle® II |
|---|---|---|
| Measures Azimuth with TruVector Compass Technology | Yes | No |
| Distance Accuracy | 0.1 m < 1,000 m (4 in < 3,280 ft) and to a High-Quality target 0.2 m > 1,000 m (8 in > 3,280 ft) or to a Low-Quality target |
±1.6 in (±4 cm) typical targets <400m; ±6 inches (±15cm) typical targets < 1000m ±1.6 in (±4 cm) to ±1 ft (±30 cm) to distant and weak targets |
| Ranging Performance | 50 cm - 2,500 m (20 in - 8,202 ft) | 0 m to 2,500 m (0 to 8,202 ft) |
| Inclination Accuracy | 0.1° @ 0° to ±30° 0.2° @ ±30° to ±90° |
TruPulse 200X: ± 0.1° Typical TruAngle II: Maintains ± 0.3° accuracy up to 10° tilt |
| Angle Accuracy | N/A | Horizontal +/- 0.1° |
| Azimuth Accuracy | < 1.0° RMS | N/A |
| Wireless Comm / App compatibility | Windows® + iOS + Android® | TruAngle II is Android™ + iOS |
| Scope Magnification / In-Scope Display Type | 5X/LED HUD | 7X/LCD |
