About This Manual
This manual provides essential information for the safe operation and maintenance of the JET Models SBR-30N and SBR-40N Shear, Brake, and Roll. It includes detailed instructions on installation, safety precautions, general operating procedures, maintenance schedules, and comprehensive parts breakdowns.
Designed for durability and performance, these machines are built to offer years of reliable service when operated and maintained according to the guidelines within this document. For any inquiries or further assistance, please contact your local JET distributor or visit waltermeier.com.
Key Features & Specifications
The JET Shear, Brake, and Roll is a versatile machine capable of performing shearing, bending, and rolling operations on sheet metal. Key specifications include:
- Models: SBR-30N (30-inch capacity), SBR-40N (40-inch capacity)
- Material Capacity: Up to 20 gauge mild steel
- Functions: Shear, Press Brake, Slip Roll
- Included Dies: Multiple dies for various bending applications
- Wire Grooves: Available for bending wire
For detailed specifications, please refer to the Specifications section within the full manual.
Safety First
Adherence to safety guidelines is paramount. Always read and understand the warnings provided in this manual and on the machine itself. Key safety points include:
- Wear appropriate safety glasses.
- Keep the work area clean and free of obstructions.
- Ensure the machine is properly secured to a stable surface.
- Keep hands and fingers clear of moving parts and pinch points.
- Do not exceed the machine's specified capacity.
- Only operate the machine after receiving proper training.
Warranty and Service
JET products are backed by a limited warranty. For service or repair, contact an Authorized Service Center. For detailed warranty information and to locate a service center, please call 1-800-274-6848 or visit waltermeier.com.
