SKY ROVER KNIGHTFORCE US858922 Remote Control Toy

Contents and Overview

Functions and Specifications

Full Functionality: Rise, Fall, Turn Left, Turn Right, Forward, Backward, Stop.

Power Supply: Requires 3 x 1.5 V (AAA) alkaline batteries for the remote controller (batteries sold separately). Operates on 2.4 GHz frequency.

Components

Diagram showing the remote control with numbered components:

• 13. Throttle Lever
• 14. Speed mode
• 15. Power switch [Power Switch] (OFF-ON)
• 16. Steering Lever
• 17. Power light [Power Indicator]
• 18. Left/Right Trimmer

Diagrams showing toy components (Fig. B & C, Fig. 19, 20).

Assembly Instructions

Remote Control Battery Installation (Fig. D)

1. Locate the locking screw on the back of the controller and remove it from the battery cover (Fig. 18).
2. Open the battery cover.
3. Insert 3 AAA (LR03) batteries, ensuring correct polarity (+/-) as per the diagram (Fig. 19).
4. Close the battery cover (Fig. 20).
5. Reinstall the locking screw to secure the battery door.

Safety Information

Battery Safety Precautions

• Batteries are small objects.
• Battery replacement must be performed by adults.
• Always follow the polarity (+/-) diagram in the battery compartment.
• Promptly remove dead batteries from the toy.
• Dispose of used batteries properly according to local regulations.
• Remove batteries for prolonged storage.
• Use only batteries of the same or equivalent type as recommended.
• DO NOT incinerate used batteries.
• DO NOT dispose of batteries in fire, as they may explode or leak.
• DO NOT mix old and new batteries or different types of batteries (e.g., alkaline/standard).
• DO NOT use rechargeable batteries unless specified.
• DO NOT recharge non-rechargeable batteries.
• DO NOT short-circuit the supply terminals.
• Rechargeable batteries are to be removed from the toy before being charged.
• Batteries are only to be charged by adults or by children at least 8 years old.
• Requires 3 x 1.5 V (AAA) batteries.

Environmental Disposal

Batteries and battery packs must be recycled or disposed of properly. When this product reaches the end of its useful life, it should not be disposed of with other household waste. The Waste Electrical and Electronic Equipment (WEEE) Regulations require it to be collected separately for treatment using the best available recovery and recycling techniques. This minimizes environmental impact and human health risks from hazardous substances, reduces resource requirements for new products, and avoids landfill space. Please help by keeping this product out of the municipal waste stream. The "wheelie bin" symbol ?️ indicates that it should be collected as "waste electrical and electronic equipment". You can return an old product to your retailer when buying a similar new one. For other options, contact your local council.

Compliance Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), users are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Industry Canada Compliance

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3(B)/NMB-3(B)

Portable Device Statements

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.