PrismXR Vega T1 Quick Start Guide

VR Linking With PC

To connect your VR headset to your PC:

• Connect the link cable from a USB-C port on your PC to your VR headset.
• Plug the dongle into another USB-C port on your PC to use your PrismXR earbuds.

Diagram Description: A visual representation showing a PC connected to a VR headset via a USB-C link cable, and a separate USB-C dongle plugged into the PC.

Charging Your Charging Case

Connect the charging case to the power supply.

• A red LED indicator ? signifies that the charging case is currently charging.
• A blue LED indicator ? signifies that the charging case is fully charged.

Diagram Description: An illustration of a charging case connected to a power source, with indicators for charging status (red light) and fully charged status (blue light).

Safety Instructions

Please observe the following safety precautions:

• Avoid dropping the device.
• Do not disassemble the product.
• Avoid extreme temperatures.
• Use original or certified cables.
• Do not wear the product while charging.
• Do not use any corrosive cleaner or oil to clean the product.
• Do not use the product outdoors during thunderstorms.
• Keep out of the reach of children. The product contains small parts which may be a choking hazard.
• The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
• Do not use the product in environments with too high or too low temperatures, and never expose the products to strong sunshine or very wet environments.
• Ensure there is no liquid, sweat, or water on the charging port when charging.
• Earbuds' waterproof level is IPX4; do not expose earbuds to dripping or splashing water.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not turn the volume so high that you are unable to hear your surroundings.
• Do not use earbuds while driving.
• Use caution or temporarily discontinue use in potentially hazardous situations.
• The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs), and other implants. Always maintain a distance of at least 3.94"/10 cm between the product component containing the magnet (earbuds and charging case) and any cardiac pacemaker, implanted defibrillator, or other implant.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party:

Company Name: PRISMXR PTE, LTD

Address: 60 PAYA LEBAR ROAD #12-03 PAYA LEBAR SQUARE SINGAPORE, 409051

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Download PrismXR App & Support

Discover more and enhance your experience by downloading the PrismXR App. Features include EQ Settings, Dongle Switching, Customize Controls, Firmware Update, and more.

For more information, please visit www.prismxr.com/pages/support.

Graphic Description: An image of a smartphone displaying the PrismXR application interface.

Wearing Your Earbuds

The earbuds come with 3 sizes of ear tips: S, M, and L. The medium (M) size is pre-installed on the earbuds.

• Select the ear tips that fit your ear best for optimal comfort and sound quality.

Diagram Description: Illustrations showing three ear tip sizes: Small (S), Medium (M), and Large (L). The medium ear tip is depicted attached to an earbud.

Powering On (First-Time Use)

To power on your earbuds for the first time:

1. Open the charging case.
2. Place the earbuds into the charging case. The LED indicator will turn blue ?.
3. The earbuds will automatically power on.

Diagram Description: An image showing earbuds being placed into a charging case, with a blue LED indicator illuminated on the case.

Pairing With Dongle

To pair your earbuds with the provided dongle:

1. Open the charging case. The earbuds will automatically enter pairing mode, and the LED indicator will flash blue rapidly.
2. Turn on the dongle by plugging it into the VR headset. Its LED indicator will also flash blue rapidly.
3. The earbuds will automatically connect with the dongle.

Diagram Description: Visuals depicting earbuds in a charging case with rapidly flashing blue LEDs, and a USB-C dongle also with rapidly flashing blue LEDs, indicating pairing mode.

Pairing With Bluetooth Device

To pair your earbuds with a Bluetooth-enabled device (e.g., smartphone):

1. Open the charging case. The earbuds will automatically enter Bluetooth pairing mode, and the LED indicator will flash blue rapidly.
2. Turn on Bluetooth in your device's Settings.
3. Select "PrismXR Vega T1" from your device's Bluetooth list to connect.
4. The earbuds will connect to the Bluetooth device.

Diagram Description: An illustration showing earbuds in a charging case with flashing blue LEDs, and a smartphone screen displaying Bluetooth settings with "PrismXR Vega T1" available for connection.

Controls

You can customize controls via the PrismXR App. Note that controls may vary when connected via the dongle if the console's system is incompatible. Under dual connection, controlling the Bluetooth device takes priority.

Left Earbud (6-1)

• Music: Double tap ?? to Play/Pause.
• Call: Double tap ?? to Answer/Hang up the call.
• Voice Assistant: Press and hold ✊ for 2 seconds to Wake up Voice Assistant ?️.

Right Earbud (6-2)

• Music: Double tap ?? to Play/Pause.
• Call: Double tap ?? to Answer/Hang up the call.
• Voice Assistant: Press and hold ✊ for 2 seconds to Wake up Voice Assistant ?️.

Diagram Description: Visual guides illustrating touch gestures on the left and right earbuds. Left earbud: double tap for music play/pause and call answer/hang-up; press and hold for 2 seconds for voice assistant. Right earbud: identical functions.

Playing While Charging

This device does not support data transmission. Avoid attempting to connect a PC to your VR headset to stream using a USB-C cable.

You will need a charger that supports USB Power Delivery (PD). Without it, this function may not work properly.

Diagram Description: An image showing an earbud connected to a charging cable, with icons representing playback controls (play/pause, next track) and voice assistant.