Instruction Manual for Shelti models including: LBA-0-HM PX, LAA-0, 301-0020-0, 210-0063-0, 210-0095-1, LBA-0-HM PX Home Pool Table, LBA-0-HM PX, Home Pool Table, Pool Table

Home Pool Table

userway; auto-remediation;

Scott Peterson

Click here for Home table owner's manual

American Express

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 8 Pages, 997.14KB

Document Document

Assembly Instructions

Thank you for purchasing a Shelti product. All of us at Shelti want you to be completely satisfied with your Home Pool Table, so feel free to contact us for help with the assembly of your product, Shelti parts, or other information you may require. Tools Required:
1/2" Wrench
Level

Description Shelti Pool Table Leg B ox Pool Table Leg Assembly Leg Bolts - 5/16-18x1 1/2" Pool Table Warranty Card 8° Home Pool Table Assy. Instructions

Part Number LBA-0-HM PX -LAA-0 301-0020-0 210-0063-0 210-0095-1

Quantity 1 4 12 1 1

Step #3 ­ Attach Legs 1.) Slide the box filler under the side of the pool table.
2.) Attach the legs to the bottom of

the pool table using three leg bolts (1/2" wrench) per leg.

3.) Make sure that the leg levelers are screwed all of the way into rotate the table over onto its four legs.

the leg and slowly

Step #4 ­Level The Pool Table 1.) Rough level the pool table by placing a level across, lengthwise, and diagonally into the four corners and raise or lower the appropriate leg leveler.

2.) Final level the pool table by dropping a ball onto the nose of the cushion rail and watch the drift of the ball as it comes to a stop. Raise or lower the appropriate leg leveler until the ball rolls true.

Step #5 - Complete the warranty card and return

the

self-mailing Registration Form to Shelti in the

event of upgrades and/or product recalls.

K6© Copyright 2006, Shelti Inc., Bay City · Michigan SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Disassembly Instructions
The Shelti home pool table is designed for disassembly in the event that it is not possible to move the assembled pool table into its final location. To disassemble follow the below instructions:
Tools Required: Sockets - 1/4", 3/8", 7/16", and 9/16" Phillips Screwdriver Regular Screwdriver

Step #1 - Remove The Top Rail Molding

1.) Remove the Phillips head screws.

2.) Slide the molding all of the way in

one

direction.

3.) Lift the molding on one end and slide

it in the opposite direction to

remove the molding.

Step #2 ­ Remove The Cushion Rails 1.) Remove the eighteen cushion rail bolts (3/8" socket) and cushion rails.
Step #3 - Remove The Slate.

socket) and 2 - steel slate supports.

Step #4 ­ Remove The Slate Supports
1.) Remove the four lag bolts (9/16"

Step #5 - Remove The Four Die Cast Corners. 1.) Remove the four screws that hold the bottom of the corner to the
top.
2.) Remove the two 3/8" - 16 x 2-1/2" hex head bolts (9/16" socket) and washers to remove the die cast corner from the top frame assembly.

Step # 7 ­ Remove The Bottom