Installation Guide for HOOKE ROAD models including: BXG.2120-S, BXG.2120-S Trunk Upper Basket, BXG.2120-S, Trunk Upper Basket, Upper Basket, Basket

BXG.2120-S

Hooke Road Bumper Installation Instructions | Installation Manual – Hooke Road 4x4

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 1,018.37KB

Document Document

MAKEA DIFFERENCE

Tr unk Upper Basket

BXG.2120-S
(INSTALLATION INSTRUCTION)

Please verify all parts are present and read instructions carefully before starting installation. Please feel free to contact your distributor if you have any kind of question about your purchase.

1 CONTENTS Left
A B1

Right B2

C1

C2

D

D

A: Basket B1&B2: Top Side Brackets C1&C2: Middle Side Brackets D: Bottom Side Brackets

Qty

Part Name

8

Button Bolts

4

Button Bolts

4

Button Bolts

12

Split Lock Washer

4

Split Lock Washer

Size(mm) M8*30 M8*20 M6*16 D8 D6

2 TOOLS REQUI RED

Picture

Qty

Part Name

12

Flat Washer

4

Flat Washer

12

Flange Lock Nut

4

Flange Lock Nut

Size(mm) M8*16*1.5

Picture

M6*12*1.5 M8

M6

1

Plastic Hand Knobs

M8*20

To view online instruction, please scan the QR code.

Drive Ratchet Handle

10mm, 13mm Wrench

4mm, 5mm Hex Bit Socket

10mm, 13mm Shallow Socket

3 I NSTALLATI ON I NSTRUCTI ON
Step 1
Find the c-pillar. Recommand to install it in a half c-pillar at the beginning.

Step 4
Assemble the top side brackets and the basket using (4) M6x16 button bolts, (4) split lock washers, (4) flat washers, (4) flange lock nuts. Repeat this step for the opposite of the basket. Tighten all bolts.

1

2

 

Step 2
Assemble the bottom side brackets & the middle side brackets using (8) M8x30 button bolts, (8) split lock washers, (8) flat washers, (8) flange lock nuts.
Repeat this step for the opposite of the c-pillar.
Do not tighten the hardware at this time.

Step 5
Install the plastic hand knobs to the basket. Slide the rail and open the basket when you use.

 
 

Step 3
Install the top side brackets to the middle side brackets using (4) M8x20 button bolts, (4) split lock washers, (4) flat washers, (4) flange lock nuts. Repeat this step for the opposite of the c-pillar. Tighten all bolts.





Step 6
Adjust the basket to the suitable position. Tighten all bolts in the step 2.
Step 7
The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

to find your parts.

Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad If You'd Like