Quick Start Guide

Hardware Explanations

1. Plug the adapter into the DCIN port, and press the power switch. 2. The LED indicator will light up when your hardware is ready.

The ASUS ZenWiFi BT6 router features a DCIN power port, a USB 3.0 port, three LAN ports (LAN1-3), a 2.5G WAN port, a power switch, and an LED indicator.

Connect your optical modem to the 2.5G WAN port with a network cable. Connect your PC to a LAN port with a network cable.

Before Setup

1. 01 Setting up a standalone router

   Go to ONE ROUTER SETUP STEPS.

2. 02 Setting up an AiMesh WiFi system

   Prepare two or more ASUS routers supporting AiMesh. Assign one as AiMesh router, and another one as AiMesh node. We recommend using the router with the highest specifications as your AiMesh router and the others as AiMesh nodes. Go to AiMesh SETUP STEPS.

3. 03 Download free ASUS Router App

   Download free ASUS Router App to set up and manage your router(s)

   [? ASUS Router App] [Google Play Store Link] [Apple App Store Link]

One Router Setup Steps

01 Prepare your Modem

1. Unplug the power of cable / DSL modem. If it has a battery backup, remove the battery. 2. Connect your modem to the router with the network cable provided. 3. Power on the modem. Plug modem to the power outlet and power on. 4. Check the modem LED lights to ensure the connection is active.

? If you are using DSL for internet, you will need your username / password from your Internet service provider (ISP) to properly configure your router.

02 Connect your Device

1. Power on the router. Plug in and press the power switch at the back of your router. 2. Check that the LED turns solid blue to indicate that the hardware connection is ready for setup.

[?] Connect your PC to the router using an additional network cable. [?] Or you can use a phone or pad to complete the setup via ASUS Router App.

03 Login and Connect

[Web] Open a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://www.asusrouter.com.

[App] Launch ASUS Router App and follow the instructions to complete the setup.

AiMesh Setup Steps

01 Prepare

Place your AiMesh router and node in the same room and at least 1 meter apart during the setup process.

02 AiMesh node

Keep your AiMesh node powered on and standby for AiMesh system settings.

03 AiMesh router

[Web] 1. Refer to ONE ROUTER SETUP STEPS to connect your AiMesh router to your PC and modem, and then log in into the web GUI. 2. Go to Network Map page, click AiMesh icon and then Search for your extending AiMesh node. 3. Click Search, it will automatically search for your AiMesh node nearby. When the AiMesh node shows on this page, click it to add it into the AiMesh system. 4. If you cannot find any AiMesh node, please go to TROUBLESHOOTING. 5. A message is displayed when synchronization is completed: "Successfully added RT-ABCDE to your AiMesh system, it will take awhile to show up as connected in the AiMesh router list."

[App] Log in to your existing router via ASUS Router App and choose "Add AiMesh Node" to complete the setup.

? Congratulations! You will find the pages below show up when an AiMesh node has been successfully added to the AiMesh network.

Troubleshooting

If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again.

• Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.
• Your AiMesh node is powered on.

Relocation THE BEST PERFORMANCE

Locate the AiMesh router and node at the best place.

? NOTE: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth devices and microwave ovens. We recommend that you place the routers in an open or spacious location.

FAQ FREQUENTLY ASKED QUESTIONS

Q1: Does the AiMesh router support Access Point mode?

A: Yes. You can choose to set the AiMesh router as router mode or access point mode. Please go to web GUI (http://www.asusrouter.com), and go to the page Administration > Operation Mode.

Q2: Could I setup wired connection between AiMesh routers (Ethernet backhaul)?

A: Yes. AiMesh system supports both wireless and wired connection between AiMesh router and node to maximize throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band available, and then determines automatically whether a wireless or wired connection is best to serve as the inter-router connection backbone.

1. Follow the setup steps to establish a connection between the AiMesh router and node via WiFi first. 2. Place the node in the ideal locations for best coverage. Run an Ethernet cable from a LAN port of the AiMesh router to the WAN port of AiMesh node. AiMesh system will auto-select the best path for data transmission, whether wired or wireless.

Q3: Where can I find more information about Mesh WiFi system?

A: Technical support site: https://www.asus.com/support. Video Tutorials: https://qr.asus.com/wl videotutorials.

ZenWiFi BT6 LED indications

• Solid blue: Your ZenWiFi BT6 is ready for setup.
• Solid white: Your ZenWiFi BT6 is online and works well.
• Solid red: Your ZenWiFi BT6 router has no Internet connection.

Service and Support

ASUS Recycling/Takeback Services: https://esg.asus.com/en/Takeback.htm

REACH: https://esg.asus.com/Compliance.htm

Compliance Statements

Federal Communications Commission Statement (FCC): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet in the 5.925-6.425 GHz band. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Innovation, Science and Economic Development Canada Statement (ISED): This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. CAN ICES-003(B)/NMB-003(B). Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 40cm between the radiator & your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h tt00020.html. Additional Canadian information on RF exposure also can be found at the following web: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.

Safety Notices: Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F). Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating. ? DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. ? DO NOT place or drop objects on top and do not shove any foreign objects into the product. ? DO NOT expose to or use near liquids, rain, or moisture. ? DO NOT use the modem during electrical storms. ? DO NOT cover the vents on the product to prevent the system from getting overheated. ? DO NOT use damaged power cords, accessories, or other peripherals. If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. ? DO NOT mount this equipment higher than 2 meters. ⚠️ WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Prohibition of Co-location: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 40cm between the radiator & your body.

French Safety Notices: Consignes de sécurité: Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0°C (32°F) et 40°C (104°F). Référez-vous à l'étiquette située au dessous du produit pour vérifier que l'adaptateur secteur répond aux exigences de tension. NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé. NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit. NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un orage. NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe. NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés. Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualifié ou votre revendeur. Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au système. Ne placez pas cet appareil à une hauteur supérieure à 2 mètres. ⚠️ AVERTISSEMENT ! Toute modification non expressément approuvée par la partie responsable de la conformité pourrait annuler l'autorité de l'utilisateur à utiliser l'équipement. Interdiction de co-localisation : Cet appareil et ses antennes ne doivent pas être co-localisés ou fonctionner conjointement avec une autre antenne ou émetteur. Déclaration d'exposition aux radiations : Cet équipement est conforme aux limites d'exposition aux rayonnements FCC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 40 cm entre le radiateur et votre corps.

Spanish Safety Notices: Información de seguridad: Use este producto en entornos sometidos a una temperatura ambiente comprendida entre 0 °C (32°F) y 40 °C (104 °F). Consulte la etiqueta de valores nominales situada en la parte inferior del producto y asegúrese de que su adaptador de alimentación cumple con dichos valores. NO coloque el equipo sobre una superficie irregular o inestable. Solicite asistencia técnica si la carcasa resulta dañada. NO coloque ni deje caer objetos en la parte superior del producto y no introduzca objetos extraños dentro de él. NO exponga el equipo a líquidos, lluvia o humedad, ni lo use cerca de ninguno de tales elementos. NO use el módem durante tormentas eléctricas. Para evitar que el sistema se sobrecaliente, no cubra las ranuras de ventilación del producto. NO utilice cables de alimentación, accesorios o otros periféricos dañados. Si la fuente de alimentación se avería, no intente repararla por sí mismo. Póngase en contacto con un técnico de mantenimiento autorizado o con su distribuidor. A fin de evitar posibles descargas eléctricas, desconecte el cable de alimentación de la toma de suministro eléctrico antes de cambiar la posición del sistema. NO monte este equipo a una altura superior a 2 metros. ⚠️ ADVERTENCIA: Cualquier cambio o modificación no aprobado expresamente por la parte responsable del cumplimiento podría anular la autoridad del usuario para operar el equipo. Prohibición de Co-ubicación: Este dispositivo y su(s) antena(s) no deben co-ubicarse ni operar en conjunto con ninguna otra antena o transmisor. Declaración de Exposición a Radiación: Este equipo cumple con los límites de exposición a radiación de la FCC establecidos para un entorno no controlado. Este equipo debe instalarse y operarse con una distancia mínima de 40 cm entre el radiador y su cuerpo.