JBL Charge 6 Portable Bluetooth Speaker - Quick Start Guide

What's in the Box

The package typically includes the JBL Charge 6 speaker, a USB-C charging cable, and a quick start guide.

Bluetooth Pairing

To pair your device with the JBL Charge 6:

1. Turn on the speaker.
2. On your device, go to Bluetooth settings.
3. Select 'JBL Charge 6' from the list of available devices.
4. The speaker will connect and indicate it's discoverable.

Play

Once paired, you can play music from your device. The speaker supports standard audio playback controls.

Multi-Speaker Connection

Connect multiple JBL speakers for an enhanced audio experience. Use the JBL Portable app for speaker configuration and software upgrades.

App Usage

Download the JBL Portable app to manage your speaker settings and update its software. The app is available for both iOS and Android devices.

Charging

Connect the USB-C cable to the speaker and a power source. The speaker can also function as a power bank to charge other devices.

Charging Time: Approximately 3 hours (using a 12-20V / 3A charger).

Music Playtime: Up to 24 hours (may vary based on volume and audio content).

Detachable Handle Strap

The speaker comes with a detachable handle strap for easy portability.

Waterproof & Dustproof IP68

The JBL Charge 6 is rated IP68, meaning it is waterproof and dustproof. However, it is important to follow precautions:

• Do not charge the speaker while it is wet, as this can cause permanent damage.
• Ensure the speaker is completely dry and clean before charging after exposure to liquids, salt water, or chemicals.
• Rinse off any pool chemicals or salt water after use to prevent damage to seals and connectors.

Technical Specifications

• Transducers: 53 mm x 93 mm woofer, 20 mm tweeter
• Output Power: 30 W RMS for woofer, 10 W RMS for tweeter
• Output Power (Max): 45 W (Max)
• Power Input: Voltage: 5 - 20 V (5 V, 9 V, 12 V, 15 V, 20 V); Current: 3 A (Max)
• Frequency Response: 56 Hz - 20 kHz (-6 dB)
• Signal-to-Noise Ratio: > 80 dB
• Battery Type: Li-ion polymer 34 Wh (equivalent to 7.2 V / 4722 mAh)
• Battery Charge Time: 3 hours (12 - 20 V / 3 A)
• Music Play Time: Up to 24 hours (dependent on volume level and audio content)
• Connection Ports: USB-C (in / out)
• Bluetooth® Version: 5.4
• Bluetooth® Profile: A2DP 1.4, AVRCP 1.6
• Bluetooth® Transmitter Modulation: GFSK, π/4 DQPSK, 8DPSK
• Bluetooth® Transmitter Frequency Range: 2400 MHz - 2483.5 MHz
• Bluetooth® Transmitter Power: < 12 dBm (EIRP)
• Product Dimensions (W x H x D): 228.8 x 98.5 x 94 mm / 9.0" x 3.88" x 3.7"
• Net Weight: 0.99 kg / 2.18 lbs (with handle), 0.96 kg / 2.11 lbs (without handle)
• Packaging Dimensions (W x H x D): 256 x 119 x 145 mm / 10.1" x 4.7" x 5.7"
• Gross Weight: 1.37 kg / 3.02 lbs
• Maximum Operation Temperature: 45 °C

Important Safety Information

To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

Do not expose the JBL Charge 6 to liquids without removing the cable connection. Do not expose the JBL Charge 6 to water while charging. It may result in permanent damage to the speaker or power source.

Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it’s completely dry and clean. Charging when wet might damage your speaker.

Factory Reset

To restore factory settings, hold the ‘ ’ and ‘+’ buttons for more than 2 seconds.

Charger Power Requirement

The power delivered by the charger must be between a minimum of 7.5 Watts (required by the radio equipment) and a maximum of 60 Watts to achieve the maximum charging speed.

Compliance Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

This product is approved by Anatel, in accordance with the regulated procedures for conformity assessment of telecommunications products and meets the applicable technical requirements. For more information, consult the Anatel website – www.anatel.gov.br. This equipment does not have the right to protection against harmful interference and cannot cause interference in duly authorized systems. Attention: according to Brazilian law no. 11.291, prolonged exposure to noise levels above 85dB may cause damage to the auditory system.