Hoshizaki KMS-1122MLJ Serenity Series Cuber Ice Machine
Product Overview and Specifications
Key Features
- Individual crescent cube
- Stainless steel evaporator
- CycleSaver™™ design
- Up to 1151 lbs. of ice production per 24 hours
- Durable stainless steel exterior
- EverCheck™™ alert system
- No heat, less noise
- CFC / HFC Free Foam
- R-404A Refrigerant
Specifications
Dimensions
Ice Machine (KMS-1122MLJ):
- WxDxH: 22" x 18 1/8" x 31 1/4"
- Shipping Dimensions: 30 1/2" x 30" x 37"
Remote Condenser (SRK-12J / SRK-12J3):
- Installation Dimensions: 52 3/8" x 19 1/2" x 43" (includes legs)
- Actual Dimensions: 50 1/4" x 17" x 28"
Ice Production
| Model | Condenser | Lbs. per 24 hours (70°F Air / 50°F Water) | Lbs. per 24 hours (90°F Air / 70°F Water) | Water Usage (Gal. per 100 lbs. at 90°F Air / 70°F Water) | kWh Used per 100 lbs. (at 90°F Air / 70°F Water) |
|---|---|---|---|---|---|
| KMS-1122MLJ with SRK-12J Remote | Remote | 1151 | 1075 | 16.0 | 4.2 |
| KMS-1122MLJ with SRK-12J3 Remote | Remote | 1151 | 1100 | 16.0 | 4.05 |
Electrical
| Model | Condenser | Voltage | Circuit Wires (including ground) | Refrigerant Charge Amount | Net / Ship Weight (lbs.) |
|---|---|---|---|---|---|
| KMS-1122MLJ with SRK-12J Remote | Remote | 115V/60/1* | 4+ | 7.1 oz. | 122/152 |
| KMS-1122MLJ with SRK-12J3 Remote | Remote | 115V/60/3* | 4 | 7.1 oz. | 122/152 |
Remote Condenser Electrical & Heat Rejection
| Model | Line Sets - Brazing Required (25' Length) | Line Sets - Brazing Required (35' Length) | Line Sets - Brazing Required (55' Length) | Temp Range (Ambient Outdoor Use) | Voltage | Min. Circuit Amperage | Max. Fuse Size | Circuit Wires (including ground) | Heat Rejection BTU/hr. | Refrigerant Charge Amount | Net / Ship Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SRK-12J | HS-0250+ | HS-0251+ | HS-0252+ | -20-122°F | 208-230V/60/1 | 11.6A | 20A | 4+ | 16,500 | 15 lb. 14 oz. | 230/275 |
| SRK-12J3 | HS-0250+ | HS-0251+ | HS-0252+ | -20-122°F | 208-230V/60/3 | 10.5A | 20A | 4 | 17,300 | 15 lb. 14 oz. | 230/275 |
* Voltage supply for KMS Ice Maker is supplied from the SRK Remote Condenser.
+ Line sets require refrigerant. If neutral is not available, transformer kit (HS-5030) is required. Refer to instruction manual for installation and electrical requirements.
Operating Limits (KMS-1122MLJ)
- Ambient Temp Range: 45-100°F
- Water Temp Range: 45-90°F
- Icemaker Water Supply Line: Minimum 3/8" Nominal ID Copper Water Tubing or Equivalent
- Water Pressure: 10-113 PSIG
- Icemaker Drain Line: Minimum 3/4" Nominal ID Hard Pipe or Equivalent
- Voltage Range: 187-253V+
- If GFCI is required, a GFCI breaker MUST be used in lieu of GFCI receptacle.
Service Clearances
KMS-1122MLJ:
- Allow 6" (15 cm) clearance at rear, sides, and top for proper air circulation and ease of maintenance/service.
- Panels are easily removed and all components are accessible for service.
SRK-12J(3) Remote Condenser:
- Allow 24" (61 cm) clearance in both front and rear for proper air circulation and ease of maintenance/service.
- For best performance, the Remote Condenser should not be more than 33 feet above the icemaker or no more than 10 feet below it. These distances are measured from fitting to fitting.
Warranty
3 Year Parts & Labor on the entire machine. 5 Year Parts & Labor on the Evaporator. 5 Year Parts on the Compressor; air-cooled condenser coil. Warranty is valid in the United States, Canada, Puerto Rico, and U.S. Territories. Contact Hoshizaki for warranty information in other countries.
Certifications
- AHRI CERTIFIED
- UL CERTIFIED
- NSF Certified to NSF/ANSI 169
- ISO9001
- ISO14001
Diagrams
KMS-1122MLJ Ice Machine Dimensions:
Front View: Shows the main ice machine unit with dimensions for width, depth, and height. Includes connections for liquid line, suction line, wire harness, and water inlet/drain.
Side View: Illustrates the side profile of the ice machine, highlighting depth and height, and showing connection points.
Rear View: Depicts the back of the ice machine, indicating water connections and access points.
Bottom View: Shows the base of the ice machine with mounting hole locations and connection details.
SRK-12J(3) Remote Condenser Dimensions:
Front View: Displays the remote condenser unit with dimensions and connection ports for refrigerant lines and electrical supply.
Side View: Illustrates the side profile of the remote condenser.
Top View: Shows the top of the remote condenser, indicating dimensions and layout.
KMEdge™ Cube Dimensions:
A diagram shows the approximate dimensions of a single ice cube: 1 1/8" (29mm) width, 1 1/2" (38mm) depth, and 1/2" (13mm) height.
